[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <f756daf8-7880-2c0e-f182-1748b65e5c79@ti.com>
Date: Thu, 10 Aug 2017 10:58:13 +0530
From: Vignesh R <vigneshr@...com>
To: Rob Herring <robh@...nel.org>
CC: Marek Vasut <marek.vasut@...il.com>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
Santosh Shilimkar <ssantosh@...nel.org>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
<linux-mtd@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 1/7] mtd: spi-nor: cadence-quadspi: add a delay in write
sequence
On Thursday 10 August 2017 05:38 AM, Rob Herring wrote:
> On Tue, Aug 01, 2017 at 10:24:28AM +0530, Vignesh R wrote:
>> As per 66AK2G02 TRM[1] SPRUHY8F section 11.15.5.3 Indirect Access
>> Controller programming sequence, a delay equal to couple QSPI master
>> clock(~5ns) is required after setting CQSPI_REG_INDIRECTWR_START bit and
>> writing data to the flash. Add a new compatible to handle the couple of
>> cycles of delay required in the indirect write sequence, since this
>> delay is specific to TI 66AK2G SoC.
>>
>> [1]http://www.ti.com/lit/ug/spruhy8f/spruhy8f.pdf
>>
>> Signed-off-by: Vignesh R <vigneshr@...com>
>> ---
>> Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 1 +
>> drivers/mtd/spi-nor/cadence-quadspi.c | 13 +++++++++++++
>> 2 files changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
>> index f248056da24c..fdd511a83511 100644
>> --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
>> +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
>> @@ -2,6 +2,7 @@
>>
>> Required properties:
>> - compatible : Should be "cdns,qspi-nor".
>> + Should be "ti,k2g-qspi" for TI 66AK2G platform.
>
> Also, this doesn't indicate that "cdns,qspi-nor" is a fallback as you
> have in the dts files. Reformat to 1 valid combination per line.
>
Agreed, will fix it in v2.
--
Regards
Vignesh
Powered by blists - more mailing lists