| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <bf4e23a9-ee21-71c6-af13-adf3fe12b5f4@ti.com>
Date: Thu, 10 Aug 2017 10:10:52 +0300
From: Roger Quadros <rogerq@...com>
To: Rob Herring <robh@...nel.org>, <arm@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Tony Lindgren <tony@...mide.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>
Subject: Re: [PATCH] memory: Convert to using %pOF instead of full_name
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 19/07/17 00:43, Rob Herring wrote:
> Now that we have a custom printf format specifier, convert users of
> full_name to use %pOF instead. This is preparation to remove storing
> of the full path string for each node.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
> Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>
> Cc: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
> Cc: Roger Quadros <rogerq@...com>
> Cc: Tony Lindgren <tony@...mide.com>
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-omap@...r.kernel.org
> ---
> drivers/memory/atmel-ebi.c | 17 ++++++++---------
> drivers/memory/jz4780-nemc.c | 12 ++++++------
> drivers/memory/mvebu-devbus.c | 12 ++++++------
> drivers/memory/omap-gpmc.c | 18 +++++++++---------
> 4 files changed, 29 insertions(+), 30 deletions(-)
for omap-gpmc.c
Acked-by: Roger Quadros <rogerq@...com>
>
> diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
> index 99e644cda4d1..597282e35c69 100644
> --- a/drivers/memory/atmel-ebi.c
> +++ b/drivers/memory/atmel-ebi.c
> @@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
> out:
> if (ret) {
> dev_err(ebid->ebi->dev,
> - "missing or invalid timings definition in %s",
> - np->full_name);
> + "missing or invalid timings definition in %pOF",
> + np);
> return ret;
> }
>
> @@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
> return -EINVAL;
>
> if ((ret > 0 && !required) || (!ret && required)) {
> - dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s",
> - np->full_name);
> + dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
> + np);
> return -EINVAL;
> }
>
> @@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
>
> if (cs >= AT91_MATRIX_EBI_NUM_CS ||
> !(ebi->caps->available_cs & BIT(cs))) {
> - dev_err(dev, "invalid reg property in %s\n",
> - np->full_name);
> + dev_err(dev, "invalid reg property in %pOF\n", np);
> return -EINVAL;
> }
>
> @@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
> }
>
> if (!numcs) {
> - dev_err(dev, "invalid reg property in %s\n", np->full_name);
> + dev_err(dev, "invalid reg property in %pOF\n", np);
> return -EINVAL;
> }
>
> @@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev)
>
> ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
> if (ret) {
> - dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
> - child->full_name);
> + dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
> + child);
>
> ret = atmel_ebi_dev_disable(ebi, child);
> if (ret)
> diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c
> index 919d1925acb9..bcf06adefc96 100644
> --- a/drivers/memory/jz4780-nemc.c
> +++ b/drivers/memory/jz4780-nemc.c
> @@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
> bank = of_read_number(prop, 1);
> if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) {
> dev_err(nemc->dev,
> - "%s requests invalid bank %u\n",
> - child->full_name, bank);
> + "%pOF requests invalid bank %u\n",
> + child, bank);
>
> /* Will continue the outer loop below. */
> referenced = 0;
> @@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
> }
>
> if (!referenced) {
> - dev_err(nemc->dev, "%s has no addresses\n",
> - child->full_name);
> + dev_err(nemc->dev, "%pOF has no addresses\n",
> + child);
> continue;
> } else if (nemc->banks_present & referenced) {
> - dev_err(nemc->dev, "%s conflicts with another node\n",
> - child->full_name);
> + dev_err(nemc->dev, "%pOF conflicts with another node\n",
> + child);
> continue;
> }
>
> diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
> index 24852812fd44..981860879d02 100644
> --- a/drivers/memory/mvebu-devbus.c
> +++ b/drivers/memory/mvebu-devbus.c
> @@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus,
>
> err = of_property_read_u32(node, name, &time_ps);
> if (err < 0) {
> - dev_err(devbus->dev, "%s has no '%s' property\n",
> - name, node->full_name);
> + dev_err(devbus->dev, "%pOF has no '%s' property\n",
> + node, name);
> return err;
> }
>
> @@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
> err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
> if (err < 0) {
> dev_err(devbus->dev,
> - "%s has no 'devbus,bus-width' property\n",
> - node->full_name);
> + "%pOF has no 'devbus,bus-width' property\n",
> + node);
> return err;
> }
>
> @@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
> &w->sync_enable);
> if (err < 0) {
> dev_err(devbus->dev,
> - "%s has no 'devbus,sync-enable' property\n",
> - node->full_name);
> + "%pOF has no 'devbus,sync-enable' property\n",
> + node);
> return err;
> }
> }
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> index a80e17de906d..f7f393541934 100644
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -960,7 +960,7 @@ static int gpmc_cs_remap(int cs, u32 base)
> * Make sure we ignore any device offsets from the GPMC partition
> * allocated for the chip select and that the new base confirms
> * to the GPMC 16MB minimum granularity.
> - */
> + */
> base &= ~(SZ_16M - 1);
>
> gpmc_cs_get_memconf(cs, &old_base, &size);
> @@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
> struct omap_onenand_platform_data *gpmc_onenand_data;
>
> if (of_property_read_u32(child, "reg", &val) < 0) {
> - dev_err(&pdev->dev, "%s has no 'reg' property\n",
> - child->full_name);
> + dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
> + child);
> return -ENODEV;
> }
>
> @@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
> struct gpmc_device *gpmc = platform_get_drvdata(pdev);
>
> if (of_property_read_u32(child, "reg", &cs) < 0) {
> - dev_err(&pdev->dev, "%s has no 'reg' property\n",
> - child->full_name);
> + dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
> + child);
> return -ENODEV;
> }
>
> if (of_address_to_resource(child, 0, &res) < 0) {
> - dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
> - child->full_name);
> + dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n",
> + child);
> return -ENODEV;
> }
>
> @@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
> ret = of_property_read_u32(child, "bank-width",
> &gpmc_s.device_width);
> if (ret < 0) {
> - dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
> - child->full_name);
> + dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n",
> + child);
> goto err;
> }
> }
> --
> 2.11.0
>
--
cheers,
-roger
Powered by blists - more mailing lists