| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Aug 2017 08:00:27 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Eddie James <eajames@...ux.vnet.ibm.com>
Cc: linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
jdelvare@...e.com, joel@....id.au,
"Edward A. James" <eajames@...ibm.com>
Subject: Re: [PATCH 1/4] drivers/hwmon/pmbus: Add IBM power supply hwmon
driver
On Wed, Aug 02, 2017 at 04:17:10PM -0500, Eddie James wrote:
> From: "Edward A. James" <eajames@...ibm.com>
>
> Add the driver to monitor power supplies with hwmon over pmbus.
>
> Signed-off-by: Edward A. James <eajames@...ibm.com>
> ---
> drivers/hwmon/pmbus/Kconfig | 10 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/ibmps.c | 164 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 175 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/ibmps.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 68d717a..4eba657 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -37,6 +37,16 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_IBMPS
> + tristate "IBM Power Supply"
> + default n
> + help
> + If you say yes here you get hardware monitoring support for IBM
> + power supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called ibmps.
> +
> config SENSORS_IR35221
> tristate "Infineon IR35221"
> default n
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 75bb7ca..e37b715 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_IBMPS) += ibmps.o
> obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
> obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
> diff --git a/drivers/hwmon/pmbus/ibmps.c b/drivers/hwmon/pmbus/ibmps.c
> new file mode 100644
> index 0000000..1928dd9
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/ibmps.c
> @@ -0,0 +1,164 @@
> +/*
> + * Copyright 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +
> +#include "pmbus.h"
> +
> +#define IBMPS_MFR_FAN_FAULT BIT(0)
> +#define IBMPS_MFR_THERMAL_FAULT BIT(1)
> +#define IBMPS_MFR_OV_FAULT BIT(2)
> +#define IBMPS_MFR_UV_FAULT BIT(3)
> +#define IBMPS_MFR_PS_KILL BIT(4)
> +#define IBMPS_MFR_OC_FAULT BIT(5)
> +#define IBMPS_MFR_VAUX_FAULT BIT(6)
> +#define IBMPS_MFR_CURRENT_SHARE_WARNING BIT(7)
> +
> +static int ibmps_read_word_data(struct i2c_client *client, int page, int reg);
> +
> +static int ibmps_read_byte_data(struct i2c_client *client, int page, int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_BYTE:
> + case PMBUS_STATUS_WORD:
> + rc = ibmps_read_word_data(client, page, PMBUS_STATUS_WORD);
> + break;
> + case PMBUS_STATUS_VOUT:
> + case PMBUS_STATUS_IOUT:
> + case PMBUS_STATUS_TEMPERATURE:
> + case PMBUS_STATUS_FAN_12:
> + rc = pmbus_read_byte_data(client, page, reg);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + return rc;
> +
> + if (reg == PMBUS_STATUS_FAN_12) {
> + if (mfr & IBMPS_MFR_FAN_FAULT)
> + rc |= PB_FAN_FAN1_FAULT;
> + } else if (reg == PMBUS_STATUS_TEMPERATURE) {
> + if (mfr & IBMPS_MFR_THERMAL_FAULT)
> + rc |= PB_TEMP_OT_FAULT;
> + } else if (reg == PMBUS_STATUS_VOUT) {
> + if (mfr & (IBMPS_MFR_OV_FAULT | IBMPS_MFR_VAUX_FAULT))
> + rc |= PB_VOLTAGE_OV_FAULT;
> + if (mfr & IBMPS_MFR_UV_FAULT)
> + rc |= PB_VOLTAGE_UV_FAULT;
> + } else if (reg == PMBUS_STATUS_IOUT) {
> + if (mfr & IBMPS_MFR_OC_FAULT)
> + rc |= PB_IOUT_OC_FAULT;
> + if (mfr & IBMPS_MFR_CURRENT_SHARE_WARNING)
> + rc |= PB_CURRENT_SHARE_FAULT;
> + }
> + break;
> + default:
> + if (reg >= PMBUS_VIRT_BASE)
> + return -ENXIO;
> +
> + rc = pmbus_read_byte_data(client, page, reg);
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static int ibmps_read_word_data(struct i2c_client *client, int page, int reg)
> +{
> + int rc, mfr;
> +
> + switch (reg) {
> + case PMBUS_STATUS_BYTE:
> + case PMBUS_STATUS_WORD:
> + rc = pmbus_read_word_data(client, page, PMBUS_STATUS_WORD);
> + if (rc < 0)
> + return rc;
> +
> + mfr = pmbus_read_byte_data(client, page,
> + PMBUS_STATUS_MFR_SPECIFIC);
> + if (mfr < 0)
> + return rc;
> +
> + if (mfr & IBMPS_MFR_PS_KILL)
> + rc |= PB_STATUS_OFF;
> +
> + if (mfr)
> + rc |= PB_STATUS_WORD_MFR;
> + break;
> + default:
> + if (reg >= PMBUS_VIRT_BASE)
> + return -ENXIO;
> +
> + rc = pmbus_read_word_data(client, page, reg);
> + if (rc < 0)
> + rc = ibmps_read_byte_data(client, page, reg);
> + break;
> + }
> +
> + return rc;
> +}
> +
> +static struct pmbus_driver_info ibmps_info = {
> + .pages = 1,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
> + PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
> + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
> + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
> + .read_byte_data = ibmps_read_byte_data,
> + .read_word_data = ibmps_read_word_data,
> +};
> +
> +static int ibmps_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + return pmbus_do_probe(client, id, &ibmps_info);
> +}
> +
> +static int ibmps_remove(struct i2c_client *client)
> +{
> + return pmbus_do_remove(client);
> +}
> +
> +enum chips { witherspoon };
> +
> +static const struct i2c_device_id ibmps_id[] = {
> + { "witherspoon", witherspoon },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ibmps_id);
> +
> +static const struct of_device_id ibmps_of_match[] = {
> + { .compatible = "ibm,ibmps" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, p8_i2c_occ_of_match);
Ah yes, as 0day points out, this won't compile.
Hmmm ..... makes me wonder if and how you tested this.
Can you provide output from the "sensors" command ?
Guenter
> +
> +static struct i2c_driver ibmps_driver = {
> + .driver = {
> + .name = "ibmps",
> + .of_match_table = ibmps_of_match,
> + },
> + .probe = ibmps_probe,
> + .remove = ibmps_remove,
> + .id_table = ibmps_id,
> +};
> +
> +module_i2c_driver(ibmps_driver);
> +
> +MODULE_AUTHOR("Eddie James");
> +MODULE_DESCRIPTION("PMBus driver for IBM power supply");
> +MODULE_LICENSE("GPL");
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists