| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1502381384-219889-16-git-send-email-john.garry@huawei.com>
Date: Fri, 11 Aug 2017 00:09:40 +0800
From: John Garry <john.garry@...wei.com>
To: <jejb@...ux.vnet.ibm.com>, <martin.petersen@...cle.com>
CC: <linuxarm@...wei.com>, <linux-scsi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <bianpan2016@....com>,
Xiang Chen <chenxiang66@...ilicon.com>,
John Garry <john.garry@...wei.com>
Subject: [PATCH 15/19] scsi: hisi_sas: add reset handler for v3 hw
From: Xiang Chen <chenxiang66@...ilicon.com>
Use ACPI "_RST" method to reset the controller, since
FLR is not supported.
Function hisi_sas_stop_phys() is introduced to remove
some code duplication.
Signed-off-by: Xiang Chen <chenxiang66@...ilicon.com>
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 9 ++
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 24 +----
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 158 +++++++++++++++++++++++++++++----
4 files changed, 157 insertions(+), 36 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 23a22dc..4c393cd 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -15,6 +15,7 @@
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/dmapool.h>
+#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -402,6 +403,7 @@ struct hisi_sas_slot_buf_table {
extern struct scsi_transport_template *hisi_sas_stt;
extern struct scsi_host_template *hisi_sas_sht;
+extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
extern void hisi_sas_init_add(struct hisi_hba *hisi_hba);
extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
extern void hisi_sas_free(struct hisi_hba *hisi_hba);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7e642c8..4112afd 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -127,6 +127,15 @@ struct hisi_sas_port *to_hisi_sas_port(struct asd_sas_port *sas_port)
}
EXPORT_SYMBOL_GPL(to_hisi_sas_port);
+void hisi_sas_stop_phys(struct hisi_hba *hisi_hba)
+{
+ int phy_no;
+
+ for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++)
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+}
+EXPORT_SYMBOL_GPL(hisi_sas_stop_phys);
+
static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
{
void *bitmap = hisi_hba->slot_index_tags;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 0e3634e..779af97 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1486,25 +1486,12 @@ static void start_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v2_hw(hisi_hba, phy_no);
}
-static void stop_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- disable_phy_v2_hw(hisi_hba, phy_no);
-}
-
-static void stop_phys_v2_hw(struct hisi_hba *hisi_hba)
-{
- int i;
-
- for (i = 0; i < hisi_hba->n_phy; i++)
- stop_phy_v2_hw(hisi_hba, i);
-}
-
static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- stop_phy_v2_hw(hisi_hba, phy_no);
+ disable_phy_v2_hw(hisi_hba, phy_no);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
@@ -1533,7 +1520,7 @@ static void phy_get_events_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
sphy->running_disparity_error_count += err6_reg_val & 0xFF;
}
-static void start_phys_v2_hw(struct hisi_hba *hisi_hba)
+static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
{
int i;
@@ -1548,11 +1535,6 @@ static void start_phys_v2_hw(struct hisi_hba *hisi_hba)
}
}
-static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
-{
- start_phys_v2_hw(hisi_hba);
-}
-
static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
{
u32 sl_control;
@@ -3429,7 +3411,7 @@ static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
interrupt_disable_v2_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
- stop_phys_v2_hw(hisi_hba);
+ hisi_sas_stop_phys(hisi_hba);
mdelay(10);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index efc2e82..111e45c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -165,6 +165,31 @@
#define PHYCTRL_PHY_ENA_MSK (PORT_BASE + 0x2bc)
#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0)
#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define MAX_ITCT_HW 4096 /* max the hw can support */
+#define DEFAULT_ITCT_HW 2048 /* reset value, not reprogrammed */
+#if (HISI_SAS_MAX_DEVICES > DEFAULT_ITCT_HW)
+#error Max ITCT exceeded
+#endif
+
+#define AXI_MASTER_CFG_BASE (0x5000)
+#define AM_CTRL_GLOBAL (0x0)
+#define AM_CURR_TRANS_RETURN (0x150)
+
+#define AM_CFG_MAX_TRANS (0x5010)
+#define AM_CFG_SINGLE_PORT_MAX_TRANS (0x5014)
+#define AXI_CFG (0x5100)
+#define AM_ROB_ECC_ERR_ADDR (0x510c)
+#define AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF 0
+#define AM_ROB_ECC_ONEBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF)
+#define AM_ROB_ECC_MULBIT_ERR_ADDR_OFF 8
+#define AM_ROB_ECC_MULBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_MULBIT_ERR_ADDR_OFF)
/* HW dma structures */
/* Delivery queue header */
@@ -604,8 +629,52 @@ static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
1 << CFG_ABT_SET_IPTT_DONE_OFF);
}
+static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ int ret;
+ u32 val;
+
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
+
+ /* Disable all of the PHYs */
+ hisi_sas_stop_phys(hisi_hba);
+ udelay(50);
+
+ /* Ensure axi bus idle */
+ ret = readl_poll_timeout(hisi_hba->regs + AXI_CFG, val, !val,
+ 20000, 1000000);
+ if (ret) {
+ dev_err(dev, "axi bus is not idle, ret = %d!\n", ret);
+ return -EIO;
+ }
+
+ if (ACPI_HANDLE(dev)) {
+ acpi_status s;
+
+ s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
+ if (ACPI_FAILURE(s)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+ } else
+ dev_err(dev, "no reset method!\n");
+
+ return 0;
+}
+
static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
{
+ struct device *dev = hisi_hba->dev;
+ int rc;
+
+ rc = reset_hw_v3_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
init_reg_v3_hw(hisi_hba);
return 0;
@@ -634,25 +703,12 @@ static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v3_hw(hisi_hba, phy_no);
}
-static void stop_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- disable_phy_v3_hw(hisi_hba, phy_no);
-}
-
-static void start_phys_v3_hw(struct hisi_hba *hisi_hba)
-{
- int i;
-
- for (i = 0; i < hisi_hba->n_phy; i++)
- start_phy_v3_hw(hisi_hba, i);
-}
-
static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- stop_phy_v3_hw(hisi_hba, phy_no);
+ disable_phy_v3_hw(hisi_hba, phy_no);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
@@ -669,7 +725,17 @@ enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
static void phys_init_v3_hw(struct hisi_hba *hisi_hba)
{
- start_phys_v3_hw(hisi_hba);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
+ start_phy_v3_hw(hisi_hba, i);
+ }
}
static void sl_notify_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1614,6 +1680,66 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
return 0;
}
+static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct pci_dev *pdev = hisi_hba->pci_dev;
+ int i;
+
+ synchronize_irq(pci_irq_vector(pdev, 1));
+ synchronize_irq(pci_irq_vector(pdev, 2));
+ synchronize_irq(pci_irq_vector(pdev, 11));
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
+ synchronize_irq(pci_irq_vector(pdev, i + 16));
+ }
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xffffffff);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x1);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x1);
+ hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x1);
+ }
+}
+
+static u32 get_phys_state_v3_hw(struct hisi_hba *hisi_hba)
+{
+ return hisi_sas_read32(hisi_hba, PHY_STATE);
+}
+
+static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ int rc;
+ u32 status;
+
+ interrupt_disable_v3_hw(hisi_hba);
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
+
+ hisi_sas_stop_phys(hisi_hba);
+
+ mdelay(10);
+
+ hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
+
+ /* wait until bus idle */
+ rc = readl_poll_timeout(hisi_hba->regs + AXI_MASTER_CFG_BASE +
+ AM_CURR_TRANS_RETURN, status, status == 0x3, 10, 100);
+ if (rc) {
+ dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+ return rc;
+ }
+
+ hisi_sas_init_mem(hisi_hba);
+
+ return hw_init_v3_hw(hisi_hba);
+}
+
static const struct hisi_sas_hw hisi_sas_v3_hw = {
.hw_init = hisi_sas_v3_init,
.setup_itct = setup_itct_v3_hw,
@@ -1635,6 +1761,8 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
.dereg_device = dereg_device_v3_hw,
+ .soft_reset = soft_reset_v3_hw,
+ .get_phys_state = get_phys_state_v3_hw,
};
static struct Scsi_Host *
--
1.9.1
Powered by blists - more mailing lists