lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Aug 2017 12:06:40 -0500 From: Rob Herring <robh@...nel.org> To: Frank Wang <frank.wang@...k-chips.com> Cc: heiko@...ech.de, kishon@...com, mark.rutland@....com, gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, linux-rockchip@...ts.infradead.org, huangtao@...k-chips.com, william.wu@...k-chips.com, daniel.meng@...k-chips.com, kever.yang@...k-chips.com, andy.yan@...k-chips.com, wmc@...k-chips.com Subject: Re: [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt On Thu, Aug 03, 2017 at 04:09:12PM +0800, Frank Wang wrote: > Add otg-mux property to support multiplexed interrupt in otg-port > on some Rockchip SoC (e.g RV1108). > > Signed-off-by: Frank Wang <frank.wang@...k-chips.com> > --- > Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > index ddf868a..ed6aee4 100644 > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt > @@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides. > Required properties (port (child) node): > - #phy-cells : must be 0. See ./phy-bindings.txt for details. > - interrupts : specify an interrupt for each entry in interrupt-names. > - - interrupt-names : a list which shall be the following entries: > + - interrupt-names : a list which should be one of the following cases: > + Regular case: > * "otg-id" : for the otg id interrupt. > * "otg-bvalid" : for the otg vbus interrupt. > * "linestate" : for the host/otg linestate interrupt. > + Some SoCs use one interrupt with the obove muxed together, so for these s/obove/above/ With that, Acked-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists