lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 10 Aug 2017 14:10:56 -0500
From:   Rob Herring <robh@...nel.org>
To:     Michal Simek <michal.simek@...inx.com>
Cc:     linux-arm-kernel@...ts.infradead.org,
        Soren Brinkmann <soren.brinkmann@...inx.com>,
        devicetree@...r.kernel.org, monstr@...str.eu,
        linux-kernel@...r.kernel.org, Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH 1/3] dt: xilinx: zynqmp: Add bindings for PM firmware

On Fri, Aug 04, 2017 at 03:45:30PM +0200, Michal Simek wrote:
> From: Soren Brinkmann <soren.brinkmann@...inx.com>
> 
> Document the DT bindings for the Zynq UltraScale+ PM Firmware.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
> Signed-off-by: Michal Simek <michal.simek@...inx.com>
> ---
> 
>  .../devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt | 19 +++++++++++++++++++

bindings/firmware/

>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
> new file mode 100644
> index 000000000000..222a18ce07fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-pm.txt
> @@ -0,0 +1,19 @@
> +Xilinx Zynq MPSoC Firmware Device Tree Bindings
> +
> +The zynqmp-pm node describes the interface to platform firmware.

Please define this should be under /firmware node.

> +Required properties:
> + - compatible:	Must contain:  "xlnx,zynqmp-pm"
> + - method:	The method of calling the PM-API firmware layer.
> +		Permitted values are:
> +		 - "smc" : To be used in configurations without a hypervisor
> +		 - "hvc" : To be used when hypervisor is present

Do you really use both?

> + - interrupts:	Interrupt specifier
> +
> +Examples:
> +	zynqmp-firmware {
> +		compatible = "xlnx,zynqmp-pm";
> +		method = "smc";
> +		interrupt-parent = <&gic>;
> +		interrupts = <0 35 4>;
> +	};
> -- 
> 1.9.1
> 

Powered by blists - more mailing lists