| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fe630f05a6ce0b8e8f1cab78d6b102899a71a4ae.1502779753.git.sean.wang@mediatek.com>
Date: Tue, 15 Aug 2017 17:09:15 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <matthias.bgg@...il.com>,
<mark.rutland@....com>, <lgirdwood@...il.com>,
<broonie@...nel.org>, <jamesjj.liao@...iatek.com>,
<henryc.chen@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>
CC: <chen.zhong@...iatek.com>, <chenglin.xu@...iatek.com>,
<linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v3 3/9] regulator: mt6380: Add support for MT6380
From: Chenglin Xu <chenglin.xu@...iatek.com>
The MT6380 is a regulator found those boards with MediaTek MT7622 SoC
It is connected as a slave to the SoC using MediaTek PMIC wrapper which
is the common interface connecting with Mediatek made various PMICs.
Signed-off-by: Chenglin Xu <chenglin.xu@...iatek.com>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6380-regulator.c | 352 +++++++++++++++++++++++++++++
include/linux/regulator/mt6380-regulator.h | 32 +++
4 files changed, 394 insertions(+)
create mode 100644 drivers/regulator/mt6380-regulator.c
create mode 100644 include/linux/regulator/mt6380-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 99b9362..1205e82 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -559,6 +559,15 @@ config REGULATOR_MT6323
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6380
+ tristate "MediaTek MT6380 PMIC"
+ depends on MTK_PMIC_WRAP
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6380 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 95b1e86..81514b8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c
new file mode 100644
index 0000000..127dd72
--- /dev/null
+++ b/drivers/regulator/mt6380-regulator.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6380-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+/* PMIC Registers */
+#define MT6380_ALDO_CON_0 0x0000
+#define MT6380_BTLDO_CON_0 0x0004
+#define MT6380_COMP_CON_0 0x0008
+#define MT6380_CPUBUCK_CON_0 0x000C
+#define MT6380_CPUBUCK_CON_1 0x0010
+#define MT6380_CPUBUCK_CON_2 0x0014
+#define MT6380_DDRLDO_CON_0 0x0018
+#define MT6380_MLDO_CON_0 0x001C
+#define MT6380_PALDO_CON_0 0x0020
+#define MT6380_PHYLDO_CON_0 0x0024
+#define MT6380_SIDO_CON_0 0x0028
+#define MT6380_SIDO_CON_1 0x002C
+#define MT6380_SIDO_CON_2 0x0030
+#define MT6380_SLDO_CON_0 0x0034
+#define MT6380_TLDO_CON_0 0x0038
+#define MT6380_STARTUP_CON_0 0x003C
+#define MT6380_STARTUP_CON_1 0x0040
+#define MT6380_SMPS_TOP_CON_0 0x0044
+#define MT6380_SMPS_TOP_CON_1 0x0048
+#define MT6380_ANA_CTRL_0 0x0050
+#define MT6380_ANA_CTRL_1 0x0054
+#define MT6380_ANA_CTRL_2 0x0058
+#define MT6380_ANA_CTRL_3 0x005C
+#define MT6380_ANA_CTRL_4 0x0060
+#define MT6380_SPK_CON9 0x0064
+#define MT6380_SPK_CON11 0x0068
+#define MT6380_SPK_CON12 0x006A
+#define MT6380_CLK_CTRL 0x0070
+#define MT6380_PINMUX_CTRL 0x0074
+#define MT6380_IO_CTRL 0x0078
+#define MT6380_SLP_MODE_CTRL_0 0x007C
+#define MT6380_SLP_MODE_CTRL_1 0x0080
+#define MT6380_SLP_MODE_CTRL_2 0x0084
+#define MT6380_SLP_MODE_CTRL_3 0x0088
+#define MT6380_SLP_MODE_CTRL_4 0x008C
+#define MT6380_SLP_MODE_CTRL_5 0x0090
+#define MT6380_SLP_MODE_CTRL_6 0x0094
+#define MT6380_SLP_MODE_CTRL_7 0x0098
+#define MT6380_SLP_MODE_CTRL_8 0x009C
+#define MT6380_FCAL_CTRL_0 0x00A0
+#define MT6380_FCAL_CTRL_1 0x00A4
+#define MT6380_LDO_CTRL_0 0x00A8
+#define MT6380_LDO_CTRL_1 0x00AC
+#define MT6380_LDO_CTRL_2 0x00B0
+#define MT6380_LDO_CTRL_3 0x00B4
+#define MT6380_LDO_CTRL_4 0x00B8
+#define MT6380_DEBUG_CTRL_0 0x00BC
+#define MT6380_EFU_CTRL_0 0x0200
+#define MT6380_EFU_CTRL_1 0x0201
+#define MT6380_EFU_CTRL_2 0x0202
+#define MT6380_EFU_CTRL_3 0x0203
+#define MT6380_EFU_CTRL_4 0x0204
+#define MT6380_EFU_CTRL_5 0x0205
+#define MT6380_EFU_CTRL_6 0x0206
+#define MT6380_EFU_CTRL_7 0x0207
+#define MT6380_EFU_CTRL_8 0x0208
+
+#define MT6380_REGULATOR_MODE_AUTO 0
+#define MT6380_REGULATOR_MODE_FORCE_PWM 1
+
+/*
+ * mt6380 regulators' information
+ *
+ * @desc: standard fields of regulator description
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @modeset_reg: Register for controlling the buck/LDO control mode
+ * @modeset_mask: Mask for controlling the buck/LDO control mode
+ */
+struct mt6380_regulator_info {
+ struct regulator_desc desc;
+ u32 vselon_reg;
+ u32 modeset_reg;
+ u32 modeset_mask;
+};
+
+#define MT6380_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, enbit, voselon, _modeset_reg, \
+ _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .vselon_reg = voselon, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6380_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask, _modeset_reg, _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6380_REG_FIXED(match, vreg, enreg, enbit, volt, \
+ _modeset_reg, _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .min_uV = volt, \
+ }, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+ REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000),
+};
+
+static const u32 ldo_volt_table1[] = {
+ 1400000, 1350000, 1300000, 1250000, 1200000, 1150000, 1100000, 1050000,
+};
+
+static const u32 ldo_volt_table2[] = {
+ 2200000, 3300000,
+};
+
+static const u32 ldo_volt_table3[] = {
+ 1240000, 1390000, 1540000, 1840000,
+};
+
+static const u32 ldo_volt_table4[] = {
+ 2200000, 3300000,
+};
+
+static int mt6380_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ int ret, val = 0;
+ struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = MT6380_REGULATOR_MODE_AUTO;
+ break;
+ case REGULATOR_MODE_FAST:
+ val = MT6380_REGULATOR_MODE_FORCE_PWM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+
+ return ret;
+}
+
+static unsigned int mt6380_regulator_get_mode(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ unsigned int mode;
+ int ret;
+ struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ switch (val) {
+ case MT6380_REGULATOR_MODE_AUTO:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case MT6380_REGULATOR_MODE_FORCE_PWM:
+ mode = REGULATOR_MODE_FAST;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return mode;
+}
+
+static const struct regulator_ops mt6380_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+/* The array is indexed by id(MT6380_ID_XXX) */
+static struct mt6380_regulator_info mt6380_regulators[] = {
+ MT6380_BUCK("buck-vcore1", VCPU, 600000, 1393750, 6250,
+ buck_volt_range1, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_1,
+ 0xfe, 3, MT6380_ANA_CTRL_1,
+ MT6380_CPUBUCK_CON_0, 0x8000000),
+ MT6380_BUCK("buck-vcore", VCORE, 600000, 1393750, 6250,
+ buck_volt_range2, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_2,
+ 0xfe, 2, MT6380_ANA_CTRL_2, MT6380_SIDO_CON_0, 0x1000000),
+ MT6380_BUCK("buck-vrf", VRF, 1200000, 1575000, 25000,
+ buck_volt_range3, MT6380_ANA_CTRL_3, MT6380_SIDO_CON_0,
+ 0x78, 1, MT6380_SIDO_CON_0, MT6380_SIDO_CON_0, 0x8000),
+ MT6380_LDO("ldo-vm", VMLDO, ldo_volt_table1, MT6380_LDO_CTRL_0,
+ 1, MT6380_MLDO_CON_0, 0xE000, MT6380_ANA_CTRL_1, 0x4000000),
+ MT6380_LDO("ldo-va", VALDO, ldo_volt_table2, MT6380_LDO_CTRL_0,
+ 2, MT6380_ALDO_CON_0, 0x400, MT6380_ALDO_CON_0, 0x20),
+ MT6380_REG_FIXED("ldo-vphy", VPHYLDO, MT6380_LDO_CTRL_0, 7, 1800000,
+ MT6380_PHYLDO_CON_0, 0x80),
+ MT6380_LDO("ldo-vddr", VDDRLDO, ldo_volt_table3, MT6380_LDO_CTRL_0,
+ 8, MT6380_DDRLDO_CON_0, 0x3000, MT6380_DDRLDO_CON_0, 0x80),
+ MT6380_LDO("ldo-vt", VTLDO, ldo_volt_table4, MT6380_LDO_CTRL_0, 3,
+ MT6380_TLDO_CON_0, 0x400, MT6380_TLDO_CON_0, 0x20),
+};
+
+static int mt6380_regulator_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0; i < MT6380_MAX_REGULATOR; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6380_regulators[i];
+ config.regmap = regmap;
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6380_regulators[i].desc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6380_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct platform_device_id mt6380_platform_ids[] = {
+ {"mt6380-regulator", 0},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6380_platform_ids);
+
+static const struct of_device_id mt6380_of_match[] = {
+ { .compatible = "mediatek,mt6380-regulator", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt6380_of_match);
+
+static struct platform_driver mt6380_regulator_driver = {
+ .driver = {
+ .name = "mt6380-regulator",
+ .of_match_table = of_match_ptr(mt6380_of_match),
+ },
+ .probe = mt6380_regulator_probe,
+ .id_table = mt6380_platform_ids,
+};
+
+module_platform_driver(mt6380_regulator_driver);
+
+MODULE_AUTHOR("Chenglin Xu <chenglin.xu@...iatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6380 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/mt6380-regulator.h b/include/linux/regulator/mt6380-regulator.h
new file mode 100644
index 0000000..465182d
--- /dev/null
+++ b/include/linux/regulator/mt6380-regulator.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_mt6380_H
+#define __LINUX_REGULATOR_mt6380_H
+
+enum {
+ MT6380_ID_VCPU = 0,
+ MT6380_ID_VCORE,
+ MT6380_ID_VRF,
+ MT6380_ID_VMLDO,
+ MT6380_ID_VALDO,
+ MT6380_ID_VPHYLDO,
+ MT6380_ID_VDDRLDO,
+ MT6380_ID_VTLDO,
+ MT6380_ID_RG_MAX,
+};
+
+#define MT6380_MAX_REGULATOR MT6380_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_mt6380_H */
--
2.7.4
Powered by blists - more mailing lists