linux-kernel - 4.13.0-rc4 sparc64: can't allocate MSI-X affinity masks for 2 vectors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <alpine.LRH.2.20.1708151742360.29628@math.ut.ee>
Date:   Tue, 15 Aug 2017 17:54:27 +0300 (EEST)
From:   Meelis Roos <mroos@...ux.ee>
To:     sparclinux@...r.kernel.org, linux-pci@...r.kernel.org,
        qla2xxx-upstream@...gic.com,
        Linux Kernel list <linux-kernel@...r.kernel.org>
Subject: 4.13.0-rc4 sparc64: can't allocate MSI-X affinity masks for 2
 vectors

I noticed that in 4.13.0-rc4 there is a new error in dmesg on my sparc64 
t5120 server: can't allocate MSI-X affinity masks.

[   30.274284] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.00-k.
[   30.274648] qla2xxx [0000:10:00.0]-001d: : Found an ISP2432 irq 21 iobase 0x000000c100d00000.
[   30.275447] qla2xxx 0000:10:00.0: can't allocate MSI-X affinity masks for 2 vectors
[   30.816882] scsi host1: qla2xxx
[   30.877294] qla2xxx: probe of 0000:10:00.0 failed with error -22
[   30.877578] qla2xxx [0000:10:00.1]-001d: : Found an ISP2432 irq 22 iobase 0x000000c100d04000.
[   30.878387] qla2xxx 0000:10:00.1: can't allocate MSI-X affinity masks for 2 vectors
[   31.367083] scsi host1: qla2xxx
[   31.427500] qla2xxx: probe of 0000:10:00.1 failed with error -22

I do not know if the driver works since nothing is attached to the FC 
HBA at the moment, but from the error messages it looks like the driver 
fails to load.

I booted 4.12 and 4.11 - the red error is not there but the failure 
seems to be the same error -22:

[2478900.385223] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
[2478900.385610] qla2xxx [0000:10:00.0]-001d: : Found an ISP2432 irq 21 iobase 0x000000c100d00000.
[2478900.930517] scsi host1: qla2xxx
[2478900.990939] qla2xxx: probe of 0000:10:00.0 failed with error -22
[2478900.991222] qla2xxx [0000:10:00.1]-001d: : Found an ISP2432 irq 22 iobase 0x000000c100d04000.
[2478901.510715] scsi host1: qla2xxx
[2478901.581106] qla2xxx: probe of 0000:10:00.1 failed with error -22

Will try older kernels too if it is useful for bisection.

On an older sparc64 (t1-200) with 4.13.0-rc4, qla2xxx loads fine (nothing is attached there either):

[   30.590064] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.00-k.
[   30.699053] PCI: Enabling device: (0000:02:05.0), cmd 3
[   30.699122] qla2xxx [0000:02:05.0]-001d: : Found an ISP2200 irq 12 iobase 0x000001ff0000a000.
[   52.463403] scsi host2: qla2xxx
[   52.545973] qla2xxx [0000:02:05.0]-4800:2: DPC handler sleeping.
[   52.627163] qla2xxx [0000:02:05.0]-00fb:2: QLogic QLA22xx - .
[   52.705428] qla2xxx [0000:02:05.0]-00fc:2: ISP2200: PCI (33 MHz) @ 0000:02:05.0 hdma- host#=2 fw=2.02.08 TP.
[   53.503221] qla2xxx [0000:02:05.0]-480f:2: Loop resync scheduled.
[   73.796964] qla2xxx [0000:02:05.0]-8038:2: Cable is unplugged...
[   73.876036] qla2xxx [0000:02:05.0]-883a:2: fw_state=4 (ffff, ffff, ffff, ffff ffff) curr time=ffffa61d.
[   73.999845] qla2xxx [0000:02:05.0]-286c:2: qla2x00_loop_resync *** FAILED ***.
[   74.094861] qla2xxx [0000:02:05.0]-4810:2: Loop resync end.
[   74.168188] qla2xxx [0000:02:05.0]-4800:2: DPC handler sleeping.


-- 
Meelis Roos (mroos@...ux.ee)