| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1dhdUi-0007dE-5a@debutante>
Date: Tue, 15 Aug 2017 16:11:00 +0100
From: Mark Brown <broonie@...nel.org>
To: Chenglin Xu <chenglin.xu@...iatek.com>
Cc: Sean Wang <sean.wang@...iatek.com>,
Mark Brown <broonie@...nel.org>, robh+dt@...nel.org,
matthias.bgg@...il.com, mark.rutland@....com, lgirdwood@...il.com,
broonie@...nel.org, jamesjj.liao@...iatek.com,
henryc.chen@...iatek.com, devicetree@...r.kernel.org,
linux-mediatek@...ts.infradead.org, chen.zhong@...iatek.com,
chenglin.xu@...iatek.com, linux-kernel@...r.kernel.org,
Sean Wang <sean.wang@...iatek.com>,
linux-kernel@...r.kernel.org
Subject: Applied "regulator: mt6380: Add support for MT6380" to the regulator tree
The patch
regulator: mt6380: Add support for MT6380
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From a551e27368dea202cbef3e8861c21d965427cfe6 Mon Sep 17 00:00:00 2001
From: Chenglin Xu <chenglin.xu@...iatek.com>
Date: Tue, 15 Aug 2017 17:09:15 +0800
Subject: [PATCH] regulator: mt6380: Add support for MT6380
The MT6380 is a regulator found those boards with MediaTek MT7622 SoC
It is connected as a slave to the SoC using MediaTek PMIC wrapper which
is the common interface connecting with Mediatek made various PMICs.
Signed-off-by: Chenglin Xu <chenglin.xu@...iatek.com>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6380-regulator.c | 352 +++++++++++++++++++++++++++++
include/linux/regulator/mt6380-regulator.h | 32 +++
4 files changed, 394 insertions(+)
create mode 100644 drivers/regulator/mt6380-regulator.c
create mode 100644 include/linux/regulator/mt6380-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 99b9362331b5..1205e82971d0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -559,6 +559,15 @@ config REGULATOR_MT6323
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6380
+ tristate "MediaTek MT6380 PMIC"
+ depends on MTK_PMIC_WRAP
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6380 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 95b1e86ae692..81514b8c3932 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c
new file mode 100644
index 000000000000..127dd720cbcc
--- /dev/null
+++ b/drivers/regulator/mt6380-regulator.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6380-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+/* PMIC Registers */
+#define MT6380_ALDO_CON_0 0x0000
+#define MT6380_BTLDO_CON_0 0x0004
+#define MT6380_COMP_CON_0 0x0008
+#define MT6380_CPUBUCK_CON_0 0x000C
+#define MT6380_CPUBUCK_CON_1 0x0010
+#define MT6380_CPUBUCK_CON_2 0x0014
+#define MT6380_DDRLDO_CON_0 0x0018
+#define MT6380_MLDO_CON_0 0x001C
+#define MT6380_PALDO_CON_0 0x0020
+#define MT6380_PHYLDO_CON_0 0x0024
+#define MT6380_SIDO_CON_0 0x0028
+#define MT6380_SIDO_CON_1 0x002C
+#define MT6380_SIDO_CON_2 0x0030
+#define MT6380_SLDO_CON_0 0x0034
+#define MT6380_TLDO_CON_0 0x0038
+#define MT6380_STARTUP_CON_0 0x003C
+#define MT6380_STARTUP_CON_1 0x0040
+#define MT6380_SMPS_TOP_CON_0 0x0044
+#define MT6380_SMPS_TOP_CON_1 0x0048
+#define MT6380_ANA_CTRL_0 0x0050
+#define MT6380_ANA_CTRL_1 0x0054
+#define MT6380_ANA_CTRL_2 0x0058
+#define MT6380_ANA_CTRL_3 0x005C
+#define MT6380_ANA_CTRL_4 0x0060
+#define MT6380_SPK_CON9 0x0064
+#define MT6380_SPK_CON11 0x0068
+#define MT6380_SPK_CON12 0x006A
+#define MT6380_CLK_CTRL 0x0070
+#define MT6380_PINMUX_CTRL 0x0074
+#define MT6380_IO_CTRL 0x0078
+#define MT6380_SLP_MODE_CTRL_0 0x007C
+#define MT6380_SLP_MODE_CTRL_1 0x0080
+#define MT6380_SLP_MODE_CTRL_2 0x0084
+#define MT6380_SLP_MODE_CTRL_3 0x0088
+#define MT6380_SLP_MODE_CTRL_4 0x008C
+#define MT6380_SLP_MODE_CTRL_5 0x0090
+#define MT6380_SLP_MODE_CTRL_6 0x0094
+#define MT6380_SLP_MODE_CTRL_7 0x0098
+#define MT6380_SLP_MODE_CTRL_8 0x009C
+#define MT6380_FCAL_CTRL_0 0x00A0
+#define MT6380_FCAL_CTRL_1 0x00A4
+#define MT6380_LDO_CTRL_0 0x00A8
+#define MT6380_LDO_CTRL_1 0x00AC
+#define MT6380_LDO_CTRL_2 0x00B0
+#define MT6380_LDO_CTRL_3 0x00B4
+#define MT6380_LDO_CTRL_4 0x00B8
+#define MT6380_DEBUG_CTRL_0 0x00BC
+#define MT6380_EFU_CTRL_0 0x0200
+#define MT6380_EFU_CTRL_1 0x0201
+#define MT6380_EFU_CTRL_2 0x0202
+#define MT6380_EFU_CTRL_3 0x0203
+#define MT6380_EFU_CTRL_4 0x0204
+#define MT6380_EFU_CTRL_5 0x0205
+#define MT6380_EFU_CTRL_6 0x0206
+#define MT6380_EFU_CTRL_7 0x0207
+#define MT6380_EFU_CTRL_8 0x0208
+
+#define MT6380_REGULATOR_MODE_AUTO 0
+#define MT6380_REGULATOR_MODE_FORCE_PWM 1
+
+/*
+ * mt6380 regulators' information
+ *
+ * @desc: standard fields of regulator description
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @modeset_reg: Register for controlling the buck/LDO control mode
+ * @modeset_mask: Mask for controlling the buck/LDO control mode
+ */
+struct mt6380_regulator_info {
+ struct regulator_desc desc;
+ u32 vselon_reg;
+ u32 modeset_reg;
+ u32 modeset_mask;
+};
+
+#define MT6380_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, enbit, voselon, _modeset_reg, \
+ _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .vselon_reg = voselon, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6380_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask, _modeset_reg, _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6380_REG_FIXED(match, vreg, enreg, enbit, volt, \
+ _modeset_reg, _modeset_mask) \
+[MT6380_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6380_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6380_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .min_uV = volt, \
+ }, \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+ REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000),
+};
+
+static const u32 ldo_volt_table1[] = {
+ 1400000, 1350000, 1300000, 1250000, 1200000, 1150000, 1100000, 1050000,
+};
+
+static const u32 ldo_volt_table2[] = {
+ 2200000, 3300000,
+};
+
+static const u32 ldo_volt_table3[] = {
+ 1240000, 1390000, 1540000, 1840000,
+};
+
+static const u32 ldo_volt_table4[] = {
+ 2200000, 3300000,
+};
+
+static int mt6380_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ int ret, val = 0;
+ struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = MT6380_REGULATOR_MODE_AUTO;
+ break;
+ case REGULATOR_MODE_FAST:
+ val = MT6380_REGULATOR_MODE_FORCE_PWM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+
+ return ret;
+}
+
+static unsigned int mt6380_regulator_get_mode(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ unsigned int mode;
+ int ret;
+ struct mt6380_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ switch (val) {
+ case MT6380_REGULATOR_MODE_AUTO:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case MT6380_REGULATOR_MODE_FORCE_PWM:
+ mode = REGULATOR_MODE_FAST;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return mode;
+}
+
+static const struct regulator_ops mt6380_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6380_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6380_regulator_set_mode,
+ .get_mode = mt6380_regulator_get_mode,
+};
+
+/* The array is indexed by id(MT6380_ID_XXX) */
+static struct mt6380_regulator_info mt6380_regulators[] = {
+ MT6380_BUCK("buck-vcore1", VCPU, 600000, 1393750, 6250,
+ buck_volt_range1, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_1,
+ 0xfe, 3, MT6380_ANA_CTRL_1,
+ MT6380_CPUBUCK_CON_0, 0x8000000),
+ MT6380_BUCK("buck-vcore", VCORE, 600000, 1393750, 6250,
+ buck_volt_range2, MT6380_ANA_CTRL_3, MT6380_ANA_CTRL_2,
+ 0xfe, 2, MT6380_ANA_CTRL_2, MT6380_SIDO_CON_0, 0x1000000),
+ MT6380_BUCK("buck-vrf", VRF, 1200000, 1575000, 25000,
+ buck_volt_range3, MT6380_ANA_CTRL_3, MT6380_SIDO_CON_0,
+ 0x78, 1, MT6380_SIDO_CON_0, MT6380_SIDO_CON_0, 0x8000),
+ MT6380_LDO("ldo-vm", VMLDO, ldo_volt_table1, MT6380_LDO_CTRL_0,
+ 1, MT6380_MLDO_CON_0, 0xE000, MT6380_ANA_CTRL_1, 0x4000000),
+ MT6380_LDO("ldo-va", VALDO, ldo_volt_table2, MT6380_LDO_CTRL_0,
+ 2, MT6380_ALDO_CON_0, 0x400, MT6380_ALDO_CON_0, 0x20),
+ MT6380_REG_FIXED("ldo-vphy", VPHYLDO, MT6380_LDO_CTRL_0, 7, 1800000,
+ MT6380_PHYLDO_CON_0, 0x80),
+ MT6380_LDO("ldo-vddr", VDDRLDO, ldo_volt_table3, MT6380_LDO_CTRL_0,
+ 8, MT6380_DDRLDO_CON_0, 0x3000, MT6380_DDRLDO_CON_0, 0x80),
+ MT6380_LDO("ldo-vt", VTLDO, ldo_volt_table4, MT6380_LDO_CTRL_0, 3,
+ MT6380_TLDO_CON_0, 0x400, MT6380_TLDO_CON_0, 0x20),
+};
+
+static int mt6380_regulator_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0; i < MT6380_MAX_REGULATOR; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6380_regulators[i];
+ config.regmap = regmap;
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6380_regulators[i].desc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6380_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct platform_device_id mt6380_platform_ids[] = {
+ {"mt6380-regulator", 0},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6380_platform_ids);
+
+static const struct of_device_id mt6380_of_match[] = {
+ { .compatible = "mediatek,mt6380-regulator", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt6380_of_match);
+
+static struct platform_driver mt6380_regulator_driver = {
+ .driver = {
+ .name = "mt6380-regulator",
+ .of_match_table = of_match_ptr(mt6380_of_match),
+ },
+ .probe = mt6380_regulator_probe,
+ .id_table = mt6380_platform_ids,
+};
+
+module_platform_driver(mt6380_regulator_driver);
+
+MODULE_AUTHOR("Chenglin Xu <chenglin.xu@...iatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6380 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/mt6380-regulator.h b/include/linux/regulator/mt6380-regulator.h
new file mode 100644
index 000000000000..465182da6315
--- /dev/null
+++ b/include/linux/regulator/mt6380-regulator.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@...iatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_mt6380_H
+#define __LINUX_REGULATOR_mt6380_H
+
+enum {
+ MT6380_ID_VCPU = 0,
+ MT6380_ID_VCORE,
+ MT6380_ID_VRF,
+ MT6380_ID_VMLDO,
+ MT6380_ID_VALDO,
+ MT6380_ID_VPHYLDO,
+ MT6380_ID_VDDRLDO,
+ MT6380_ID_VTLDO,
+ MT6380_ID_RG_MAX,
+};
+
+#define MT6380_MAX_REGULATOR MT6380_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_mt6380_H */
--
2.13.3
Powered by blists - more mailing lists