Message-ID: <59f82342-5e1d-2e22-a170-8c010b5db9b8@adaptrum.com>
Date:   Wed, 16 Aug 2017 13:46:53 -0700
From:   Alexandru Gagniuc <alex.g@...ptrum.com>
To:     Philipp Zabel <p.zabel@...gutronix.de>,
        linux-kernel@...r.kernel.org
Cc:     Andre Przywara <andre.przywara@....com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Baoyou Xie <baoyou.xie@...aro.org>,
        Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
        Steffen Trumtrar <s.trumtrar@...gutronix.de>,
        Dinh Nguyen <dinguyen@...nel.org>,
        Andreas Färber <afaerber@...e.de>,
        linux-arm-kernel@...ts.infradead.org, kernel@...gutronix.de
Subject: Re: [PATCH v3 1/5] reset: add reset-simple to unify socfpga, stm32,
 sunxi, and zx2967



On 08/16/2017 02:46 AM, Philipp Zabel wrote:
> Split reusable parts out of the sunxi driver, to add a driver for simple
> reset controllers with reset lines that can be controlled by toggling
> bits in exclusive, contiguous register ranges using read-modify-write
> cycles under a spinlock. The separate sunxi driver still remains to
> register the early reset controllers, but it reuses the reset-simple
> ops.
>
> The following patches will replace compatible reset drivers with
> reset-simple, extending it where necessary.
>
> Signed-off-by: Philipp Zabel <p.zabel@...gutronix.de>

Reviewed-by: Alexandru Gagniuc <alex.g@...ptrum.com>

> ---
> Changes since v2:
>  - Add kerneldoc comment for struct reset_simple_devdata and struct
>    reset_simple_data.
>  - Rename "inverted" properties to "active_low".
>  - Use of_device_get_match_data instead of of_match_device.
> ---
>  drivers/reset/Kconfig        |  11 ++++
>  drivers/reset/Makefile       |   1 +
>  drivers/reset/reset-simple.c | 134 +++++++++++++++++++++++++++++++++++++++++++
>  drivers/reset/reset-simple.h |  41 +++++++++++++
>  drivers/reset/reset-sunxi.c  | 104 ++-------------------------------
>  5 files changed, 193 insertions(+), 98 deletions(-)
>  create mode 100644 drivers/reset/reset-simple.c
>  create mode 100644 drivers/reset/reset-simple.h
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 52d5251660b9b..f7ba01a71daee 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -68,6 +68,16 @@ config RESET_PISTACHIO
>  	help
>  	  This enables the reset driver for ImgTec Pistachio SoCs.
>
> +config RESET_SIMPLE
> +	bool "Simple Reset Controller Driver" if COMPILE_TEST
> +	default ARCH_SUNXI
> +	help
> +	  This enables a simple reset controller driver for reset lines that
> +	  that can be asserted and deasserted by toggling bits in a contiguous,
> +	  exclusive register space.
> +
> +	  Currently this driver supports Allwinner SoCs.
> +
>  config RESET_SOCFPGA
>  	bool "SoCFPGA Reset Driver" if COMPILE_TEST
>  	default ARCH_SOCFPGA
> @@ -83,6 +93,7 @@ config RESET_STM32
>  config RESET_SUNXI
>  	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
>  	default ARCH_SUNXI
> +	select RESET_SIMPLE
>  	help
>  	  This enables the reset driver for Allwinner SoCs.
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index b62783f50fe5b..ab4af99c3dfdc 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
>  obj-$(CONFIG_RESET_MESON) += reset-meson.o
>  obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>  obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> +obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>  obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
>  obj-$(CONFIG_RESET_STM32) += reset-stm32.o
>  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> new file mode 100644
> index 0000000000000..70c57c0758c39
> --- /dev/null
> +++ b/drivers/reset/reset-simple.c
> @@ -0,0 +1,134 @@
> +/*
> + * Simple Reset Controller Driver
> + *
> + * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@...gutronix.de>
> + *
> + * Based on Allwinner SoCs Reset Controller driver
> + *
> + * Copyright 2013 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
> +
> +#include "reset-simple.h"
> +
> +static inline struct reset_simple_data *
> +to_reset_simple_data(struct reset_controller_dev *rcdev)
> +{
> +	return container_of(rcdev, struct reset_simple_data, rcdev);
> +}
> +
> +static int reset_simple_set(struct reset_controller_dev *rcdev,
> +			    unsigned long id, bool assert)
> +{
> +	struct reset_simple_data *data = to_reset_simple_data(rcdev);
> +	int reg_width = sizeof(u32);
> +	int bank = id / (reg_width * BITS_PER_BYTE);
> +	int offset = id % (reg_width * BITS_PER_BYTE);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(&data->lock, flags);
> +
> +	reg = readl(data->membase + (bank * reg_width));
> +	if (assert ^ data->active_low)
> +		reg |= BIT(offset);
> +	else
> +		reg &= ~BIT(offset);
> +	writel(reg, data->membase + (bank * reg_width));
> +
> +	spin_unlock_irqrestore(&data->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int reset_simple_assert(struct reset_controller_dev *rcdev,
> +			       unsigned long id)
> +{
> +	return reset_simple_set(rcdev, id, true);
> +}
> +
> +static int reset_simple_deassert(struct reset_controller_dev *rcdev,
> +				 unsigned long id)
> +{
> +	return reset_simple_set(rcdev, id, false);
> +}
> +
> +const struct reset_control_ops reset_simple_ops = {
> +	.assert		= reset_simple_assert,
> +	.deassert	= reset_simple_deassert,
> +};
> +
> +/**
> + * struct reset_simple_devdata - simple reset controller properties
> + * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
> + *              are set to assert the reset.
> + */
> +struct reset_simple_devdata {
> +	bool active_low;
> +};
> +
> +static const struct reset_simple_devdata reset_simple_active_low = {
> +	.active_low = true,
> +};
> +
> +static const struct of_device_id reset_simple_dt_ids[] = {
> +	{ .compatible = "allwinner,sun6i-a31-clock-reset",
> +		.data = &reset_simple_active_low },
> +	{ /* sentinel */ },
> +};
> +
> +static int reset_simple_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct reset_simple_devdata *devdata;
> +	struct reset_simple_data *data;
> +	void __iomem *membase;
> +	struct resource *res;
> +
> +	devdata = of_device_get_match_data(dev);
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	membase = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(membase))
> +		return PTR_ERR(membase);
> +
> +	spin_lock_init(&data->lock);
> +	data->membase = membase;
> +	data->rcdev.owner = THIS_MODULE;
> +	data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
> +	data->rcdev.ops = &reset_simple_ops;
> +	data->rcdev.of_node = dev->of_node;
> +
> +	if (devdata)
> +		data->active_low = devdata->active_low;
> +
> +	return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static struct platform_driver reset_simple_driver = {
> +	.probe	= reset_simple_probe,
> +	.driver = {
> +		.name		= "simple-reset",
> +		.of_match_table	= reset_simple_dt_ids,
> +	},
> +};
> +builtin_platform_driver(reset_simple_driver);
> diff --git a/drivers/reset/reset-simple.h b/drivers/reset/reset-simple.h
> new file mode 100644
> index 0000000000000..39af2014b5f12
> --- /dev/null
> +++ b/drivers/reset/reset-simple.h
> @@ -0,0 +1,41 @@
> +/*
> + * Simple Reset Controller ops
> + *
> + * Based on Allwinner SoCs Reset Controller driver
> + *
> + * Copyright 2013 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __RESET_SIMPLE_H__
> +#define __RESET_SIMPLE_H__
> +
> +#include <linux/io.h>
> +#include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
> +
> +/**
> + * struct reset_simple_data - driver data for simple reset controllers
> + * @lock: spinlock to protect registers during read-modify-write cycles
> + * @membase: memory mapped I/O register range
> + * @rcdev: reset controller device base structure
> + * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
> + *              are set to assert the reset. Note that this says nothing about
> + *              the voltage level of the actual reset line.
> + */
> +struct reset_simple_data {
> +	spinlock_t			lock;
> +	void __iomem			*membase;
> +	struct reset_controller_dev	rcdev;
> +	bool				active_low;
> +};
> +
> +extern const struct reset_control_ops reset_simple_ops;
> +
> +#endif /* __RESET_SIMPLE_H__ */
> diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
> index 2c7dd1fd08df6..db9a1a75523f4 100644
> --- a/drivers/reset/reset-sunxi.c
> +++ b/drivers/reset/reset-sunxi.c
> @@ -22,64 +22,11 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>
> -struct sunxi_reset_data {
> -	spinlock_t			lock;
> -	void __iomem			*membase;
> -	struct reset_controller_dev	rcdev;
> -};
> -
> -static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
> -			      unsigned long id)
> -{
> -	struct sunxi_reset_data *data = container_of(rcdev,
> -						     struct sunxi_reset_data,
> -						     rcdev);
> -	int reg_width = sizeof(u32);
> -	int bank = id / (reg_width * BITS_PER_BYTE);
> -	int offset = id % (reg_width * BITS_PER_BYTE);
> -	unsigned long flags;
> -	u32 reg;
> -
> -	spin_lock_irqsave(&data->lock, flags);
> -
> -	reg = readl(data->membase + (bank * reg_width));
> -	writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
> -
> -	spin_unlock_irqrestore(&data->lock, flags);
> -
> -	return 0;
> -}
> -
> -static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
> -				unsigned long id)
> -{
> -	struct sunxi_reset_data *data = container_of(rcdev,
> -						     struct sunxi_reset_data,
> -						     rcdev);
> -	int reg_width = sizeof(u32);
> -	int bank = id / (reg_width * BITS_PER_BYTE);
> -	int offset = id % (reg_width * BITS_PER_BYTE);
> -	unsigned long flags;
> -	u32 reg;
> -
> -	spin_lock_irqsave(&data->lock, flags);
> -
> -	reg = readl(data->membase + (bank * reg_width));
> -	writel(reg | BIT(offset), data->membase + (bank * reg_width));
> -
> -	spin_unlock_irqrestore(&data->lock, flags);
> -
> -	return 0;
> -}
> -
> -static const struct reset_control_ops sunxi_reset_ops = {
> -	.assert		= sunxi_reset_assert,
> -	.deassert	= sunxi_reset_deassert,
> -};
> +#include "reset-simple.h"
>
>  static int sunxi_reset_init(struct device_node *np)
>  {
> -	struct sunxi_reset_data *data;
> +	struct reset_simple_data *data;
>  	struct resource res;
>  	resource_size_t size;
>  	int ret;
> @@ -108,8 +55,9 @@ static int sunxi_reset_init(struct device_node *np)
>
>  	data->rcdev.owner = THIS_MODULE;
>  	data->rcdev.nr_resets = size * 8;
> -	data->rcdev.ops = &sunxi_reset_ops;
> +	data->rcdev.ops = &reset_simple_ops;
>  	data->rcdev.of_node = np;
> +	data->active_low = true;
>
>  	return reset_controller_register(&data->rcdev);
>
> @@ -122,6 +70,8 @@ static int sunxi_reset_init(struct device_node *np)
>   * These are the reset controller we need to initialize early on in
>   * our system, before we can even think of using a regular device
>   * driver for it.
> + * The controllers that we can register through the regular device
> + * model are handled by the simple reset driver directly.
>   */
>  static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
>  	{ .compatible = "allwinner,sun6i-a31-ahb1-reset", },
> @@ -135,45 +85,3 @@ void __init sun6i_reset_init(void)
>  	for_each_matching_node(np, sunxi_early_reset_dt_ids)
>  		sunxi_reset_init(np);
>  }
> -
> -/*
> - * And these are the controllers we can register through the regular
> - * device model.
> - */
> -static const struct of_device_id sunxi_reset_dt_ids[] = {
> -	 { .compatible = "allwinner,sun6i-a31-clock-reset", },
> -	 { /* sentinel */ },
> -};
> -
> -static int sunxi_reset_probe(struct platform_device *pdev)
> -{
> -	struct sunxi_reset_data *data;
> -	struct resource *res;
> -
> -	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> -	if (!data)
> -		return -ENOMEM;
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	data->membase = devm_ioremap_resource(&pdev->dev, res);
> -	if (IS_ERR(data->membase))
> -		return PTR_ERR(data->membase);
> -
> -	spin_lock_init(&data->lock);
> -
> -	data->rcdev.owner = THIS_MODULE;
> -	data->rcdev.nr_resets = resource_size(res) * 8;
> -	data->rcdev.ops = &sunxi_reset_ops;
> -	data->rcdev.of_node = pdev->dev.of_node;
> -
> -	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
> -}
> -
> -static struct platform_driver sunxi_reset_driver = {
> -	.probe	= sunxi_reset_probe,
> -	.driver = {
> -		.name		= "sunxi-reset",
> -		.of_match_table	= sunxi_reset_dt_ids,
> -	},
> -};
> -builtin_platform_driver(sunxi_reset_driver);
>

Powered by blists - more mailing lists