[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1502956490-23087-2-git-send-email-william.wu@rock-chips.com>
Date: Thu, 17 Aug 2017 15:54:49 +0800
From: William Wu <william.wu@...k-chips.com>
To: heiko@...ech.de
Cc: robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
frank.wang@...k-chips.com, huangtao@...k-chips.com,
daniel.meng@...k-chips.com, william.wu@...k-chips.com
Subject: [PATCH v2 1/2] arm64: dts: rockchip: add usb3 controller node for RK3328 SoCs
RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@...k-chips.com>
---
Changes in v2:
- Modify the dwc3 quirk "snps,tx-ipgap-linecheck-dis-quirk" to
"snps,dis-tx-ipgap-linecheck-quirk"
.../devicetree/bindings/usb/rockchip,dwc3.txt | 4 +++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a93..d6b2e47 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -1,7 +1,9 @@
Rockchip SuperSpeed DWC3 USB SoC controller
Required properties:
-- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- compatible: should be one of the following:
+ - "rockchip,rk3399-dwc3": for rk3399 SoC
+ - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
- clocks: A list of phandle + clock-specifier pairs for the
clocks listed in clock-names
- clock-names: Should contain the following:
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e6da0ce..14bd8f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -655,6 +655,33 @@
status = "disabled";
};
+ usbdrd3: usb@...00000 {
+ compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3: dwc3@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@...11000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.0.0
Powered by blists - more mailing lists