| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170821012842.17875-6-heiko@sntech.de>
Date: Mon, 21 Aug 2017 03:28:38 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: lee.jones@...aro.org
Cc: chenjh@...k-chips.com, devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Elaine Zhang <zhangqing@...k-chips.com>,
Heiko Stuebner <heiko@...ech.de>
Subject: [PATCH v9 RESEND 5/9] mfd: rk808: Add RK805 support
From: Elaine Zhang <zhangqing@...k-chips.com>
The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:
- Regulators
- RTC
- Clocking
Both RK808 and RK805 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.
Signed-off-by: Elaine Zhang <zhangqing@...k-chips.com>
Signed-off-by: Joseph Chen <chenjh@...k-chips.com>
Acked-for-MFD-by: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 110 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c601ee1945c6..f247de83fa6c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -965,13 +965,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808/RK818 Power Management Chip"
+ tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808 and RK818
+ If you say yes here you get support for the RK805, RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 8e60ebaeaadb..18329c8b4fe7 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -70,6 +70,14 @@ static const struct regmap_config rk818_regmap_config = {
.volatile_reg = rk808_is_volatile_reg,
};
+static const struct regmap_config rk805_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK805_OFF_SOURCE_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -86,6 +94,16 @@ static struct resource rtc_resources[] = {
}
};
+static const struct mfd_cell rk805s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+};
+
static const struct mfd_cell rk808s[] = {
{ .name = "rk808-clkout", },
{ .name = "rk808-regulator", },
@@ -106,6 +124,20 @@ static const struct mfd_cell rk818s[] = {
},
};
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+ {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+ RK805_BUCK1_2_ILMAX_4000MA},
+ {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+ RK805_BUCK1_2_ILMAX_4000MA},
+ {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+ RK805_BUCK3_ILMAX_3000MA},
+ {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+ RK805_BUCK4_ILMAX_3500MA},
+ {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+ {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+ {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
@@ -135,6 +167,41 @@ static const struct rk808_reg_data rk818_pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct regmap_irq rk805_irqs[] = {
+ [RK805_IRQ_PWRON_RISE] = {
+ .mask = RK805_IRQ_PWRON_RISE_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_VB_LOW] = {
+ .mask = RK805_IRQ_VB_LOW_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON] = {
+ .mask = RK805_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON_LP] = {
+ .mask = RK805_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_HOTDIE] = {
+ .mask = RK805_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_RTC_ALARM] = {
+ .mask = RK805_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_RTC_PERIOD] = {
+ .mask = RK805_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON_FALL] = {
+ .mask = RK805_IRQ_PWRON_FALL_MSK,
+ .reg_offset = 0,
+ },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +314,17 @@ static const struct regmap_irq rk818_irqs[] = {
},
};
+static struct regmap_irq_chip rk805_irq_chip = {
+ .name = "rk805",
+ .irqs = rk805_irqs,
+ .num_irqs = ARRAY_SIZE(rk805_irqs),
+ .num_regs = 1,
+ .status_base = RK805_INT_STS_REG,
+ .mask_base = RK805_INT_STS_MSK_REG,
+ .ack_base = RK805_INT_STS_REG,
+ .init_ack_masked = true,
+};
+
static const struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -272,6 +350,25 @@ static const struct regmap_irq_chip rk818_irq_chip = {
};
static struct i2c_client *rk808_i2c_client;
+
+static void rk805_device_shutdown(void)
+{
+ int ret;
+ struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+ if (!rk808) {
+ dev_warn(&rk808_i2c_client->dev,
+ "have no rk805, so do nothing here\n");
+ return;
+ }
+
+ ret = regmap_update_bits(rk808->regmap,
+ RK805_DEV_CTRL_REG,
+ DEV_OFF, DEV_OFF);
+ if (ret)
+ dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
static void rk808_device_shutdown(void)
{
int ret;
@@ -309,6 +406,7 @@ static void rk818_device_shutdown(void)
}
static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk805" },
{ .compatible = "rockchip,rk808" },
{ .compatible = "rockchip,rk818" },
{ },
@@ -352,6 +450,15 @@ static int rk808_probe(struct i2c_client *client,
dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
switch (rk808->variant) {
+ case RK805_ID:
+ rk808->regmap_cfg = &rk805_regmap_config;
+ rk808->regmap_irq_chip = &rk805_irq_chip;
+ pre_init_reg = rk805_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+ cells = rk805s;
+ nr_cells = ARRAY_SIZE(rk805s);
+ pm_pwroff_fn = rk805_device_shutdown;
+ break;
case RK808_ID:
rk808->regmap_cfg = &rk808_regmap_config;
rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -444,6 +551,7 @@ static int rk808_remove(struct i2c_client *client)
}
static const struct i2c_device_id rk808_ids[] = {
+ { "rk805" },
{ "rk808" },
{ "rk818" },
{ },
--
2.14.1
Powered by blists - more mailing lists