lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1503383171-15515-1-git-send-email-s.abhisit@gmail.com>
Date:   Tue, 22 Aug 2017 13:26:11 +0700
From:   s.abhisit@...il.com
To:     lee.jones@...aro.org, Jonathan.Cameron@...wei.com,
        pmeerw@...erw.net, jacopo@...ndi.org, linus.walleij@...aro.org
Cc:     linux-kernel@...r.kernel.org, knaack.h@....de, lars@...afoo.de,
        fabrice.gasnier@...com, robh@...nel.org, akinobu.mita@...il.com,
        marek.vasut+renesas@...il.com, jacopo+renesas@...ndi.org,
        mike.looijmans@...ic.nl, peda@...ntia.se, jeff.dagenais@...il.com,
        linux-iio@...r.kernel.org, linux-gpio@...r.kernel.org,
        robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, Abhisit Sangjan <s.abhisit@...il.com>
Subject: [PATCH] mfd: Add support for TI LMP92001

From: Abhisit Sangjan <s.abhisit@...il.com>

TI LMP92001 Analog System Monitor and Controller

8-bit GPIOs.
12 DACs with 12-bit resolution.
The GPIOs and DACs are shared port function with Cy function pin to
take control the pin suddenly from external hardware.
DAC's referance voltage selectable for Internal/External.

16 + 1 ADCs with 12-bit resolution.
Built-in internal Temperature Sensor on channel 17.
Windows Comparator Function is supported on channel 1-3 and 9-11 for
monitoring with interrupt signal (pending to implement for interrupt).
ADC's referance voltage selectable for Internal/External.

Signed-off-by: Abhisit Sangjan <s.abhisit@...il.com>
---
 Documentation/ABI/testing/sysfs-bus-iio-lmp920001  |  92 ++++
 .../devicetree/bindings/gpio/gpio-lmp92001.txt     |  22 +
 .../bindings/iio/adc/ti-lmp92001-adc.txt           |  21 +
 .../bindings/iio/dac/ti-lmp92001-dac.txt           |  35 ++
 drivers/gpio/Kconfig                               |   7 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-lmp92001.c                       | 209 +++++++++
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/lmp92001-adc.c                     | 500 +++++++++++++++++++++
 drivers/iio/dac/Kconfig                            |   9 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/lmp92001-dac.c                     | 390 ++++++++++++++++
 drivers/mfd/Kconfig                                |  12 +
 drivers/mfd/Makefile                               |   4 +
 drivers/mfd/lmp92001-core.c                        | 308 +++++++++++++
 drivers/mfd/lmp92001-debug.c                       |  67 +++
 drivers/mfd/lmp92001-i2c.c                         | 215 +++++++++
 include/linux/mfd/lmp92001/core.h                  | 119 +++++
 include/linux/mfd/lmp92001/debug.h                 |  28 ++
 20 files changed, 2051 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-lmp920001
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lmp92001.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-lmp92001-adc.txt
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ti-lmp92001-dac.txt
 create mode 100644 drivers/gpio/gpio-lmp92001.c
 create mode 100644 drivers/iio/adc/lmp92001-adc.c
 create mode 100644 drivers/iio/dac/lmp92001-dac.c
 create mode 100644 drivers/mfd/lmp92001-core.c
 create mode 100644 drivers/mfd/lmp92001-debug.c
 create mode 100644 drivers/mfd/lmp92001-i2c.c
 create mode 100644 include/linux/mfd/lmp92001/core.h
 create mode 100644 include/linux/mfd/lmp92001/debug.h

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lmp920001 b/Documentation/ABI/testing/sysfs-bus-iio-lmp920001
new file mode 100644
index 0000000..bd4e733
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-lmp920001
@@ -0,0 +1,92 @@
+What:           /sys/bus/iio/devices/iio:deviceX/gang
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		Controls the association of analog output channels OUTx with
+		asynchronous control inputs Cy for DAC.
+                Can be either:
+                - "0"
+                - "1"
+
+			Cy to OUTx Assignment
+		----------------------------------
+		| Cy | CDAC:GANG=0 | CDAC:GANG=1 |
+		----------------------------------
+		| C1 | OUT[1:4]    | OUT[1:3]    |
+		----------------------------------
+		| C2 | OUT[5:6]    | OUT[4:6]    |
+		----------------------------------
+		| C3 | OUT[7:8]    | OUT[7:9]    |
+		----------------------------------
+		| C4 | OUT[9:12]   | OUT[10:12]  |
+		----------------------------------
+
+What:           /sys/bus/iio/devices/iio:deviceX/outx
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		The pin output mode for DAC.
+                Can be either:
+                - "hiz" = High impedance state.
+                - "dac" = DAC output.
+		- "0" = Drive it to low.
+		- "1" = Drive it to high.
+
+What:           /sys/bus/iio/devices/iio:deviceX/vref
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is voltage referance source for DACs.
+                Can be either:
+                - "external"
+                - "internal"
+
+What:           /sys/devices/socX/soc/XXXXXXX.aips-bus/XXXXXXX.i2c/i2c-X/X-00XX/lmp92001-adc.X.auto/iio:deviceX/en
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is ADC Conversion Enable for each channel.
+                Can be either:
+                - "enable"
+                - "disable"
+
+What:           /sys/devices/socX/soc/XXXXXXX.aips-bus/XXXXXXX.i2c/i2c-X/X-00XX/lmp92001-adc.X.auto/iio:deviceX/mode
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is conversion mode for all of ADCs.
+                Can be either:
+                - "continuous" = Continuously conversion all the time.
+                - "single-shot" = Once time conversion and stop.
+
+What:           /sys/devices/socX/soc/XXXXXXX.aips-bus/XXXXXXX.i2c/i2c-X/X-00XX/lmp92001-adc.X.auto/iio:deviceX/vref
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is voltage referance source for ADCs.
+                Can be either:
+                - "external"
+                - "internal"
+
+What:           /sys/devices/socX/soc/XXXXXXX.aips-bus/XXXXXXX.i2c/i2c-X/X-00XX/lmp92001-adc.X.auto/iio:deviceX/events/in_voltageX_thresh_{falling|rising}_en
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is ADC's Windows Comparator Function enable for falling and rising.
+		Supported channels are 1-3 and 9-11.
+
+What:           /sys/devices/socX/soc/XXXXXXX.aips-bus/XXXXXXX.i2c/i2c-X/X-00XX/lmp92001-adc.X.auto/iio:deviceX/events/in_voltageX_thresh_{falling|rising}_value
+Date:		August 2016
+KernelVersion:  4.1.15
+Contact:        Abhisit Sangjan <s.abhisit@...il.com>
+Description:
+		This is ADC's Windows Comparator Function value for falling and rising.
+		Supported channels are 1-3 and 9-11.
+		The possible range is 0 - 2047.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lmp92001.txt b/Documentation/devicetree/bindings/gpio/gpio-lmp92001.txt
new file mode 100644
index 0000000..c68784e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-lmp92001.txt
@@ -0,0 +1,22 @@
+* Texas Instruments' LMP92001 GPIOs
+
+Required properties:
+ - compatible: Must be set to "ti,lmp92001-gpio".
+ - reg: i2c chip address for the device.
+ - gpio-controller: Marks the device node as a gpio controller.
+ - #gpio-cells : Should be two.  The first cell is the pin number and the
+  second cell is used to specify the gpio polarity:
+        0 = Active high
+        1 = Active low
+
+Example:
+lmp92001@20 {
+        compatible = "ti,lmp92001";
+        reg = <0x20>;
+
+        lmp92001_gpio: lmp92001-gpio {
+                compatible = "ti,lmp92001-gpio";
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-lmp92001-adc.txt b/Documentation/devicetree/bindings/iio/adc/ti-lmp92001-adc.txt
new file mode 100644
index 0000000..34d7809
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-lmp92001-adc.txt
@@ -0,0 +1,21 @@
+* Texas Instruments' LMP92001 ADCs
+
+Required properties:
+ - compatible: Must be set to "ti,lmp92001-adc".
+ - reg: i2c chip address for the device.
+ - ti,lmp92001-adc-mode: adc operation, either continuous or single-shot.
+ - ti,lmp92001-adc-mask: bit mask for which channel is enable.
+        0 = Off
+        1 = On
+
+Example:
+lmp92001@20 {
+        compatible = "ti,lmp92001";
+        reg = <0x20>;
+
+        lmp92001-adc {
+                compatible = "ti,lmp92001-adc";
+                ti,lmp92001-adc-mode = "continuous";
+                ti,lmp92001-adc-mask = <0x00000079>;
+        };
+};
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/iio/dac/ti-lmp92001-dac.txt b/Documentation/devicetree/bindings/iio/dac/ti-lmp92001-dac.txt
new file mode 100644
index 0000000..882db9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti-lmp92001-dac.txt
@@ -0,0 +1,35 @@
+* Texas Instruments' LMP92001 DACs
+
+Required properties:
+ - compatible: Must be set to "ti,lmp92001-dac".
+ - reg: i2c chip address for the device.
+ - ti,lmp92001-dac-hiz: hi-impedance control,
+        1 = Forces all OUT[1:12] outputs to hi-z, 0 = normal
+ - ti,lmp92001-dac-outx:
+        Cy = 0, 1 = will force associated OUTx outputs to VDD
+        Cy = 0, 0 = will force associated OUTx outputs to GND
+ - ti,lmp92001-dac-gang: What group of Cy is governed to.
+        -----------------------------------------
+        |  Cy   | CDAC:GANG = 0 | CDAC:GANG = 1 |
+        -----------------------------------------
+        |  C1   |   OUT[1:4]    |    OUT[1:3]   |
+        -----------------------------------------
+        |  C2   |   OUT[5:6]    |    OUT[4:6]   |
+        -----------------------------------------
+        |  C3   |   OUT[7:8]    |    OUT[7:9]   |
+        -----------------------------------------
+        |  C4   |   OUT[9:12]   |    OUT[10:12] |
+        -----------------------------------------
+
+Example:
+lmp92001@20 {
+        compatible = "ti,lmp92001";
+        reg = <0x20>;
+
+        lmp92001-dac {
+                compatible = "ti,lmp92001-dac";
+                ti,lmp92001-dac-hiz  = /bits/ 8 <0>;
+                ti,lmp92001-dac-outx = /bits/ 8 <0>;
+                ti,lmp92001-dac-gang = /bits/ 8 <0>;
+        };
+};
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 461d6fc..5962ea0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -948,6 +948,13 @@ config GPIO_KEMPLD
 	  This driver can also be built as a module. If so, the module will be
 	  called gpio-kempld.
 
+config GPIO_LMP92001
+       tristate "LMP92001 GPIOs"
+       depends on MFD_LMP92001
+       help
+         Say yes here to access the GPIO signals of TI LMP92001 Analog System
+         Monitor and Controller.
+
 config GPIO_LP3943
 	tristate "TI/National Semiconductor LP3943 GPIO expander"
 	depends on MFD_LP3943
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a9fda6c..560d59c 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
 obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LMP92001)	+= gpio-lmp92001.o
 obj-$(CONFIG_GPIO_LOONGSON)	+= gpio-loongson.o
 obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
 obj-$(CONFIG_GPIO_LPC18XX)	+= gpio-lpc18xx.o
diff --git a/drivers/gpio/gpio-lmp92001.c b/drivers/gpio/gpio-lmp92001.c
new file mode 100644
index 0000000..b80ba4e
--- /dev/null
+++ b/drivers/gpio/gpio-lmp92001.c
@@ -0,0 +1,209 @@
+/*
+ * gpio-lmp92001.c - Support for TI LMP92001 GPIOs
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/mfd/lmp92001/core.h>
+
+#define SGEN_GPI	(1 << 0) /* 1 - if any bit in SGPI is set. */
+
+struct lmp92001_gpio {
+	struct lmp92001 *lmp92001;
+	struct gpio_chip gpio_chip;
+};
+
+static int lmp92001_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CGPO, &val);
+	if (ret < 0)
+		return ret;
+
+	return (val >> offset) & BIT(0);
+}
+
+static int lmp92001_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+
+	return regmap_update_bits(lmp92001->regmap, LMP92001_CGPO, BIT(offset),
+					BIT(offset));
+}
+
+static int lmp92001_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+	unsigned int val, sgen;
+
+	/*
+	 * Does the GPIO input mode?
+	 * Does the GPIO was set?
+	 * Reading indicated logic level.
+	 * Clear indicated logic level.
+	 */
+	regmap_read(lmp92001->regmap, LMP92001_CGPO, &val);
+	if ((val >> offset) & BIT(0)) {
+		regmap_read(lmp92001->regmap, LMP92001_SGEN, &sgen);
+		if (sgen & SGEN_GPI) {
+			regmap_read(lmp92001->regmap, LMP92001_SGPI, &val);
+			regmap_update_bits(lmp92001->regmap, LMP92001_CGPO,
+						0xFF, val);
+		}
+	}
+
+	return !!(val & BIT(offset));
+}
+
+static int lmp92001_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+
+	return regmap_update_bits(lmp92001->regmap, LMP92001_CGPO, BIT(offset),
+					0 << offset);
+}
+
+static void lmp92001_gpio_set(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+
+	regmap_update_bits(lmp92001->regmap, LMP92001_CGPO, BIT(offset),
+				value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void lmp92001_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct lmp92001_gpio *lmp92001_gpio = gpiochip_get_data(chip);
+	struct lmp92001 *lmp92001 = lmp92001_gpio->lmp92001;
+	int i, gpio;
+	unsigned int cgpo;
+	const char *label, *dir, *logic;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		gpio = i + chip->base;
+
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			continue;
+
+		regmap_read(lmp92001->regmap, LMP92001_CGPO, &cgpo);
+		if ((cgpo>>i) & BIT(0))
+			dir = "in";
+		else
+			dir = "out";
+
+		if (lmp92001_gpio_get(chip, i))
+			logic = "hi";
+		else
+			logic = "lo";
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) %-3.3s %-2.2s\n",
+				gpio, label, dir, logic);
+	}
+}
+#else
+#define lmp92001_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip lmp92001_gpio_chip = {
+	.label			= "lmp92001",
+	.owner			= THIS_MODULE,
+	.get_direction		= lmp92001_gpio_get_direction,
+	.direction_input	= lmp92001_gpio_direction_in,
+	.get			= lmp92001_gpio_get,
+	.direction_output	= lmp92001_gpio_direction_out,
+	.set			= lmp92001_gpio_set,
+	.dbg_show		= lmp92001_gpio_dbg_show,
+};
+
+static int lmp92001_gpio_probe(struct platform_device *pdev)
+{
+	struct lmp92001 *lmp92001 = dev_get_drvdata(pdev->dev.parent);
+	struct lmp92001_gpio *lmp92001_gpio;
+	int ret;
+
+	lmp92001_gpio = devm_kzalloc(&pdev->dev, sizeof(*lmp92001_gpio),
+					GFP_KERNEL);
+	if (!lmp92001_gpio)
+		return -ENOMEM;
+
+	lmp92001_gpio->lmp92001 = lmp92001;
+	lmp92001_gpio->gpio_chip = lmp92001_gpio_chip;
+	lmp92001_gpio->gpio_chip.ngpio = 8;
+	lmp92001_gpio->gpio_chip.parent = &pdev->dev;
+	lmp92001_gpio->gpio_chip.base = -1;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &lmp92001_gpio->gpio_chip,
+					lmp92001_gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, lmp92001_gpio);
+
+	return ret;
+}
+
+static int lmp92001_gpio_remove(struct platform_device *pdev)
+{
+	struct lmp92001_gpio *lmp92001_gpio = platform_get_drvdata(pdev);
+
+	devm_gpiochip_remove(&pdev->dev, &lmp92001_gpio->gpio_chip);
+
+	return 0;
+}
+
+static struct platform_driver lmp92001_gpio_driver = {
+	.driver.name	= "lmp92001-gpio",
+	.probe		= lmp92001_gpio_probe,
+	.remove		= lmp92001_gpio_remove,
+};
+
+static int __init lmp92001_gpio_init(void)
+{
+	return platform_driver_register(&lmp92001_gpio_driver);
+}
+subsys_initcall(lmp92001_gpio_init);
+
+static void __exit lmp92001_gpio_exit(void)
+{
+	platform_driver_unregister(&lmp92001_gpio_driver);
+}
+module_exit(lmp92001_gpio_exit);
+
+MODULE_AUTHOR("Abhisit Sangjan <s.abhisit@...il.com>");
+MODULE_DESCRIPTION("GPIO interface for TI LMP92001");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lmp92001-gpio");
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 614fa41..2adeba5 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -331,6 +331,16 @@ config IMX7D_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called imx7d_adc.
 
+config LMP92001_ADC
+       tristate "TI LMP92001 ADC Driver"
+       depends on MFD_LMP92001
+       help
+         If you say yes here you get support for TI LMP92001 ADCs
+         conversion.
+
+         This driver can also be built as a module. If so, the module will
+         be called lmp92001_adc.
+
 config LP8788_ADC
 	tristate "LP8788 ADC driver"
 	depends on MFD_LP8788
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index b546736a..2ed8986 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_HI8435) += hi8435.o
 obj-$(CONFIG_HX711) += hx711.o
 obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
 obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
+obj-$(CONFIG_LMP92001_ADC) += lmp92001-adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
diff --git a/drivers/iio/adc/lmp92001-adc.c b/drivers/iio/adc/lmp92001-adc.c
new file mode 100644
index 0000000..8e64b51
--- /dev/null
+++ b/drivers/iio/adc/lmp92001-adc.c
@@ -0,0 +1,500 @@
+/*
+ * lmp92001-adc.c - Support for TI LMP92001 ADCs
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x and ad5064 drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/lmp92001/core.h>
+
+#define CGEN_STRT	(1 << 0) /* Is continuous conversion all of ADCs? */
+#define CGEN_LCK	(1 << 1) /* Is lock the HW register? */
+#define CGEN_RST	(1 << 7) /* Reset all registers. */
+
+#define CREF_AEXT	(1 << 1) /* 1 - ADC external reference.
+				  * 0 - ADC internal reference.
+				  */
+
+static int lmp92001_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *channel,
+	int *val, int *val2,
+	long mask)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int code, cgen, sgen, try;
+	int ret;
+
+	mutex_lock(&lmp92001->adc_lock);
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CGEN, &cgen);
+	if (ret < 0)
+		goto exit;
+
+	/*
+	 * Is not continuous conversion?
+	 * Lock the HW registers (if needed).
+	 * Triggering single-short conversion.
+	 * Waiting for conversion successfully.
+	 */
+	if (!(cgen & CGEN_STRT)) {
+		if (!(cgen & CGEN_LCK)) {
+			ret = regmap_update_bits(lmp92001->regmap,
+					LMP92001_CGEN, CGEN_LCK, CGEN_LCK);
+			if (ret < 0)
+				goto exit;
+		}
+
+		/* Writing any value to triggered Single-Shot conversion. */
+		ret = regmap_write(lmp92001->regmap, LMP92001_CTRIG, 1);
+		if (ret < 0)
+			goto exit;
+
+		/* In case of conversion is in-progress, repeat for 10 times. */
+		try = 10;
+		do {
+			ret = regmap_read(lmp92001->regmap,
+						LMP92001_SGEN, &sgen);
+			if (ret < 0)
+				goto exit;
+		} while ((sgen & CGEN_RST) && (--try > 0));
+
+		if (!try) {
+			ret = -ETIME;
+			goto exit;
+		}
+	}
+
+	ret = regmap_read(lmp92001->regmap, 0x1F + channel->channel, &code);
+	if (ret < 0)
+		goto exit;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (channel->type) {
+		case IIO_VOLTAGE:
+		case IIO_TEMP:
+			*val = code;
+			ret = IIO_VAL_INT;
+			goto exit;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* In case of no match channel info/type is return here. */
+	ret = -EINVAL;
+
+exit:
+	mutex_unlock(&lmp92001->adc_lock);
+
+	return ret;
+}
+
+static const struct iio_info lmp92001_info = {
+	.read_raw = lmp92001_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static ssize_t lmp92001_avref_read(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cref;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CREF, &cref);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", cref & CREF_AEXT ? "external" : "internal");
+}
+
+static ssize_t lmp92001_avref_write(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel,
+	const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cref;
+	int ret;
+
+	if (strncmp("external", buf, 8) == 0)
+		cref = 2;
+	else if (strncmp("internal", buf, 8) == 0)
+		cref = 0;
+	else
+		return -EINVAL;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CREF, CREF_AEXT,
+					cref);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t lmp92001_enable_read(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int reg, cad;
+	int ret;
+
+	switch (channel->channel) {
+	case 1 ... 8:
+		reg = LMP92001_CAD1;
+		break;
+	case 9 ... 16:
+		reg = LMP92001_CAD2;
+		break;
+	case 17:
+		reg = LMP92001_CAD3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(lmp92001->regmap, reg, &cad);
+	if (ret < 0)
+		return ret;
+
+	if (channel->channel <= 8)
+		cad >>= channel->channel - 1;
+	else if (channel->channel > 8)
+		cad >>= channel->channel - 9;
+	else if (channel->channel > 16)
+		cad >>= channel->channel - 17;
+	else
+		return -EINVAL;
+
+	return sprintf(buf, "%s\n", cad & BIT(0) ? "enable" : "disable");
+}
+
+static ssize_t lmp92001_enable_write(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel,
+	const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int reg, enable, shif, mask;
+	int ret;
+
+	switch (channel->channel) {
+	case 1 ... 8:
+		reg = LMP92001_CAD1;
+		shif = (channel->channel - 1);
+		break;
+	case 9 ... 16:
+		reg = LMP92001_CAD2;
+		shif = (channel->channel - 9);
+		break;
+	case 17:
+		reg = LMP92001_CAD3;
+		shif = (channel->channel - 17);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (strncmp("enable", buf, 6) == 0)
+		enable = 1;
+	else if (strncmp("disable", buf, 7) == 0)
+		enable = 0;
+	else
+		return -EINVAL;
+
+	enable <<= shif;
+	mask = 1 << shif;
+
+	ret = regmap_update_bits(lmp92001->regmap, reg, mask, enable);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t lmp92001_mode_read(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cgen;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CGEN, &cgen);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n",
+			cgen & BIT(0) ? "continuous" : "single-shot");
+}
+
+static ssize_t lmp92001_mode_write(struct iio_dev *indio_dev,
+	uintptr_t private, struct iio_chan_spec const *channel,
+	const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cgen;
+	int ret;
+
+	if (strncmp("continuous", buf, 10) == 0)
+		cgen = 1;
+	else if (strncmp("single-shot", buf, 11) == 0)
+		cgen = 0;
+	else
+		return -EINVAL;
+
+	/*
+	 * Unlock the HW registers.
+	 * Set conversion mode.
+	 * Lock the HW registers.
+	 */
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_STRT,
+					cgen);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK,
+					CGEN_LCK);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info lmp92001_ext_info[] = {
+	{
+		.name = "vref",
+		.read = lmp92001_avref_read,
+		.write = lmp92001_avref_write,
+	.shared = IIO_SHARED_BY_ALL,
+	},
+	{
+		.name = "en",
+		.read = lmp92001_enable_read,
+		.write = lmp92001_enable_write,
+		.shared = IIO_SEPARATE,
+	},
+	{
+		.name = "mode",
+		.read = lmp92001_mode_read,
+		.write = lmp92001_mode_write,
+		.shared = IIO_SHARED_BY_ALL,
+	},
+	{ },
+};
+
+static const struct iio_event_spec lmp92001_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+			BIT(IIO_EV_INFO_VALUE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+			BIT(IIO_EV_INFO_VALUE),
+	},
+	{ },
+};
+
+#define LMP92001_CHAN_SPEC(_ch, _type, _event, _nevent) \
+{ \
+	.channel = _ch, \
+	.type = _type, \
+	.indexed = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.event_spec = _event, \
+	.num_event_specs = _nevent, \
+	.ext_info = lmp92001_ext_info, \
+}
+
+static const struct iio_chan_spec lmp92001_adc_channels[] = {
+	LMP92001_CHAN_SPEC(1, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(2, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(3, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(4, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(5, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(6, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(7, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(8, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(9, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(10, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(11, IIO_VOLTAGE, lmp92001_events,
+			ARRAY_SIZE(lmp92001_events)),
+	LMP92001_CHAN_SPEC(12, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(13, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(14, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(15, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(16, IIO_VOLTAGE, NULL, 0),
+	LMP92001_CHAN_SPEC(17,    IIO_TEMP, NULL, 0),
+};
+
+static int lmp92001_adc_probe(struct platform_device *pdev)
+{
+	struct lmp92001 *lmp92001 = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+	struct device_node *np = pdev->dev.of_node;
+	const char *conversion;
+	unsigned int cgen = 0, cad1, cad2, cad3;
+	u32 mask;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*lmp92001));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	mutex_init(&lmp92001->adc_lock);
+
+	iio_device_set_drvdata(indio_dev, lmp92001);
+
+	indio_dev->name = pdev->name;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &lmp92001_info;
+	indio_dev->channels = lmp92001_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lmp92001_adc_channels);
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN,
+					CGEN_RST, CGEN_RST);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to self reset all registers\n");
+		return ret;
+	}
+
+	/*
+	 * Turn on all of them, if you are pretty sure they are must be
+	 * real-time update or specify which channel is needed to be used to
+	 * save conversion time for a cycle.
+	 */
+	ret = of_property_read_u32(np, "ti,lmp92001-adc-mask", &mask);
+	if (ret < 0) {
+		cad1 = cad2 = cad3 = 0xFF;
+		dev_info(&pdev->dev, "turn on all of channels by default\n");
+	} else {
+		cad1 = mask & 0xFF;
+		cad2 = (mask >> 8) & 0xFF;
+		cad3 = (mask >> 16) & 0xFF;
+	}
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD1, 0xFF, cad1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable/disable channels 1-8\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD2, 0xFF, cad2);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable/disable channels 9-16\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD3, BIT(0), cad3);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"failed to enable/disable channel 17 (temperature)\n");
+		return ret;
+	}
+
+	ret = of_property_read_string_index(np, "ti,lmp92001-adc-mode", 0,
+						&conversion);
+	if (!ret) {
+		if (strncmp("continuous", conversion, 10) == 0) {
+			cgen |= 1;
+		} else if (strncmp("single-shot", conversion, 11) == 0) {
+			/* Okay */
+		} else {
+			dev_warn(&pdev->dev,
+			"wrong adc mode! set to single-short conversion\n");
+		}
+	} else
+		dev_info(&pdev->dev,
+			"single-short conversion was chosen by default\n");
+
+	/* Lock the HW registers and set conversion mode. */
+	ret = regmap_update_bits(lmp92001->regmap,
+					LMP92001_CGEN, CGEN_LCK | CGEN_STRT,
+					cgen | CGEN_LCK);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static int lmp92001_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+
+	/*
+	 * To stop ADC conversion to save power
+	 *
+	 * Unlock the HW registers.
+	 * Set conversion mode to single-shot.
+	 * Lock the HW registers.
+	 */
+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK, 0);
+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_STRT, 0);
+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK, CGEN_LCK);
+
+	devm_iio_device_unregister(&pdev->dev, indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver lmp92001_adc_driver = {
+	.driver.name	= "lmp92001-adc",
+	.probe		= lmp92001_adc_probe,
+	.remove		= lmp92001_adc_remove,
+};
+
+static int __init lmp92001_adc_init(void)
+{
+	return platform_driver_register(&lmp92001_adc_driver);
+}
+subsys_initcall(lmp92001_adc_init);
+
+static void __exit lmp92001_adc_exit(void)
+{
+	platform_driver_unregister(&lmp92001_adc_driver);
+}
+module_exit(lmp92001_adc_exit);
+
+MODULE_AUTHOR("Abhisit Sangjan <s.abhisit@...il.com>");
+MODULE_DESCRIPTION("IIO ADC interface for TI LMP92001");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lmp92001-adc");
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 25bed2d..3e0d816 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -221,6 +221,15 @@ config DPOT_DAC
 	  To compile this driver as a module, choose M here: the module will be
 	  called dpot-dac.
 
+config LMP92001_DAC
+        tristate "TI LMP92001 DAC Driver"
+        depends on MFD_LMP92001
+        help
+          If you say yes here you get support for TI LMP92001 DACs.
+
+          This driver can also be built as a module. If so, the module will
+          be called lmp92001_dac.
+
 config LPC18XX_DAC
 	tristate "NXP LPC18xx DAC driver"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 603587c..516d2be 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_AD7303) += ad7303.o
 obj-$(CONFIG_AD8801) += ad8801.o
 obj-$(CONFIG_CIO_DAC) += cio-dac.o
 obj-$(CONFIG_DPOT_DAC) += dpot-dac.o
+obj-$(CONFIG_LMP92001_DAC) += lmp92001-dac.o
 obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
 obj-$(CONFIG_LTC2632) += ltc2632.o
 obj-$(CONFIG_M62332) += m62332.o
diff --git a/drivers/iio/dac/lmp92001-dac.c b/drivers/iio/dac/lmp92001-dac.c
new file mode 100644
index 0000000..8ea981b
--- /dev/null
+++ b/drivers/iio/dac/lmp92001-dac.c
@@ -0,0 +1,390 @@
+/*
+ * lmp92001-dac.c - Support for TI LMP92001 DACs
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/lmp92001/core.h>
+
+#define CREF_DEXT	(1 << 0) /* 1 - DAC external reference.
+				  * 0 - DAC internal reference.
+				  */
+#define CDAC_OFF	(1 << 0) /* 1 - Forces all outputs to high impedance. */
+#define CDAC_OLVL	(1 << 1) /* 1 - Cy=0 will force associated OUTx outputs
+				  *     to VDD.
+				  * 0 - Cy=0 will force associated OUTx outputs
+				  *     to GND.
+				  */
+#define CDAC_GANG	(1 << 2) /* Controls the association of analog output
+				  * channels OUTx with asynchronous control
+				  * inputs Cy.
+				  *
+				  *         Cy to OUTx Assignment
+				  * --------------------------------------
+				  * | Cy | CDAC:GANG = 0 | CDAC:GANG = 1 |
+				  * --------------------------------------
+				  * | C1 | OUT[1:4]      | OUT[1:3]      |
+				  * --------------------------------------
+				  * | C2 | OUT[5:6]      | OUT[4:6]      |
+				  * --------------------------------------
+				  * | C3 | OUT[7:8]      | OUT[7:9]      |
+				  * --------------------------------------
+				  * | C4 | OUT[9:12]     | OUT[10:12]    |
+				  * --------------------------------------
+				  */
+
+static int lmp92001_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *channel,
+	int *val, int *val2,
+	long mask)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&lmp92001->dac_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (channel->type) {
+		case IIO_VOLTAGE:
+			ret = regmap_read(lmp92001->regmap,
+					0x7F + channel->channel, val);
+			if (ret < 0)
+				goto exit;
+
+			ret = IIO_VAL_INT;
+			goto exit;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* In case of no match channel info/type is return here. */
+	ret = -EINVAL;
+
+exit:
+	mutex_unlock(&lmp92001->dac_lock);
+
+	return ret;
+}
+
+int lmp92001_write_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *channel,
+	int val, int val2,
+	long mask)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	mutex_lock(&lmp92001->dac_lock);
+
+	if (val < 0 || val > 4095) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (channel->type) {
+		case IIO_VOLTAGE:
+			ret = regmap_write(lmp92001->regmap,
+					0x7F + channel->channel, val);
+			if (ret < 0)
+				goto exit;
+
+			ret = 0;
+			goto exit;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* In case of no match channel info/type is return here. */
+	ret = -EINVAL;
+
+exit:
+	mutex_unlock(&lmp92001->dac_lock);
+
+	return ret;
+}
+
+static const struct iio_info lmp92001_info = {
+	.read_raw = lmp92001_read_raw,
+	.write_raw = lmp92001_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+ssize_t lmp92001_dvref_read(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cref;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CREF, &cref);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", cref & CREF_DEXT ? "external" : "internal");
+}
+
+ssize_t lmp92001_dvref_write(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cref;
+	int ret;
+
+	if (strncmp("external", buf, 8) == 0)
+		cref = 1;
+	else if (strncmp("internal", buf, 8) == 0)
+		cref = 0;
+	else
+		return -EINVAL;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CREF, CREF_DEXT,
+					cref);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+ssize_t lmp92001_outx_read(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cdac;
+	const char *outx;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CDAC, &cdac);
+	if (ret < 0)
+		return ret;
+
+	if (cdac & CDAC_OFF)
+		outx = "hiz";
+	else {
+		if (cdac & CDAC_OLVL)
+			outx = "1 or dac";
+		else
+			outx = "0 or dac";
+	}
+
+	return sprintf(buf, "%s\n", outx);
+}
+
+ssize_t lmp92001_outx_write(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cdac, mask;
+	int ret;
+
+	if (strncmp("hiz", buf, 3) == 0) {
+		cdac = CDAC_OFF;
+		mask = CDAC_OFF;
+	} else if (strncmp("dac", buf, 3) == 0) {
+		cdac = ~CDAC_OFF;
+		mask = CDAC_OFF;
+	} else if (strncmp("0", buf, 1) == 0) {
+		cdac = ~(CDAC_OLVL | CDAC_OFF);
+		mask = CDAC_OLVL | CDAC_OFF;
+	} else if (strncmp("1", buf, 1) == 0) {
+		cdac = CDAC_OLVL;
+		mask = CDAC_OLVL | CDAC_OFF;
+	} else
+		return -EINVAL;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CDAC, mask, cdac);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+ssize_t lmp92001_gang_read(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, char *buf)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cdac;
+	int ret;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_CDAC, &cdac);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%s\n", cdac & CDAC_GANG ? "1" : "0");
+}
+
+ssize_t lmp92001_gang_write(struct iio_dev *indio_dev, uintptr_t private,
+	struct iio_chan_spec const *channel, const char *buf, size_t len)
+{
+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
+	unsigned int cdac = 0;
+	int ret;
+
+	if (strncmp("0", buf, 1) == 0)
+		cdac = ~CDAC_GANG;
+	else if (strncmp("1", buf, 1) == 0)
+		cdac = CDAC_GANG;
+	else
+		return -EINVAL;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CDAC, CDAC_GANG,
+					cdac);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info lmp92001_ext_info[] = {
+	{
+		.name = "vref",
+		.read = lmp92001_dvref_read,
+		.write = lmp92001_dvref_write,
+		.shared = IIO_SHARED_BY_ALL,
+	},
+	{
+		.name = "outx",
+		.read = lmp92001_outx_read,
+		.write = lmp92001_outx_write,
+		.shared = IIO_SHARED_BY_ALL,
+	},
+	{
+		.name = "gang",
+		.read = lmp92001_gang_read,
+		.write = lmp92001_gang_write,
+		.shared = IIO_SHARED_BY_ALL,
+	},
+	{ },
+};
+
+#define LMP92001_CHAN_SPEC(_ch) \
+{ \
+	.channel = _ch, \
+	.type = IIO_VOLTAGE, \
+	.indexed = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.ext_info = lmp92001_ext_info, \
+	.output = 1, \
+}
+
+static const struct iio_chan_spec lmp92001_dac_channels[] = {
+	LMP92001_CHAN_SPEC(1),
+	LMP92001_CHAN_SPEC(2),
+	LMP92001_CHAN_SPEC(3),
+	LMP92001_CHAN_SPEC(4),
+	LMP92001_CHAN_SPEC(5),
+	LMP92001_CHAN_SPEC(6),
+	LMP92001_CHAN_SPEC(7),
+	LMP92001_CHAN_SPEC(8),
+	LMP92001_CHAN_SPEC(9),
+	LMP92001_CHAN_SPEC(10),
+	LMP92001_CHAN_SPEC(11),
+	LMP92001_CHAN_SPEC(12),
+};
+
+static int lmp92001_dac_probe(struct platform_device *pdev)
+{
+	struct lmp92001 *lmp92001 = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+	struct device_node *np = pdev->dev.of_node;
+	u8 gang = 0, outx = 0, hiz = 0;
+	unsigned int cdac = 0;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*lmp92001));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	mutex_init(&lmp92001->dac_lock);
+
+	iio_device_set_drvdata(indio_dev, lmp92001);
+
+	indio_dev->name = pdev->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &lmp92001_info;
+	indio_dev->channels = lmp92001_dac_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lmp92001_dac_channels);
+
+	of_property_read_u8(np, "ti,lmp92001-dac-hiz", &hiz);
+	cdac |= hiz;
+
+	of_property_read_u8(np, "ti,lmp92001-dac-outx", &outx);
+	cdac |= outx << 1;
+
+	of_property_read_u8(np, "ti,lmp92001-dac-gang", &gang);
+	cdac |= gang << 2;
+
+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CDAC,
+					CDAC_GANG | CDAC_OLVL | CDAC_OFF, cdac);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static int lmp92001_dac_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	devm_iio_device_unregister(&pdev->dev, indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver lmp92001_dac_driver = {
+	.driver.name	= "lmp92001-dac",
+	.probe		= lmp92001_dac_probe,
+	.remove		= lmp92001_dac_remove,
+};
+
+static int __init lmp92001_dac_init(void)
+{
+	return platform_driver_register(&lmp92001_dac_driver);
+}
+subsys_initcall(lmp92001_dac_init);
+
+static void __exit lmp92001_dac_exit(void)
+{
+	platform_driver_unregister(&lmp92001_dac_driver);
+}
+module_exit(lmp92001_dac_exit);
+
+MODULE_AUTHOR("Abhisit Sangjan <s.abhisit@...il.com>");
+MODULE_DESCRIPTION("IIO DAC interface for TI LMP92001");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lmp92001-dac");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 94ad2c1..a20389a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1528,6 +1528,18 @@ config MFD_LM3533
 	  additional drivers must be enabled in order to use the LED,
 	  backlight or ambient-light-sensor functionality of the device.
 
+config MFD_LMP92001
+       tristate "TI LMP92001 Analog System Monitor and Controller"
+       depends on I2C
+       select MFD_CORE
+       select REGMAP_I2C
+       help
+         Say yes here to enable support for TI LMP92001 Analog System
+         Monitor and Controller
+
+         This driver provide support for 16 ADC, 12 DAC, Voltage Reference,
+         Analog Temperature Sensor and 8-bit GPIO Port.
+
 config MFD_TIMBERDALE
 	tristate "Timberdale FPGA"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 080793b..20d2e65 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -199,6 +199,10 @@ obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
+
+lmp92001-objs			:= lmp92001-core.o lmp92001-i2c.o lmp92001-debug.o
+obj-$(CONFIG_MFD_LMP92001)	+= lmp92001.o
+
 obj-$(CONFIG_MFD_VEXPRESS_SYSREG)	+= vexpress-sysreg.o
 obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
 obj-$(CONFIG_MFD_AS3711)	+= as3711.o
diff --git a/drivers/mfd/lmp92001-core.c b/drivers/mfd/lmp92001-core.c
new file mode 100644
index 0000000..55bc9ab
--- /dev/null
+++ b/drivers/mfd/lmp92001-core.c
@@ -0,0 +1,308 @@
+/*
+ * lmp92001-core.c - Device access for TI LMP92001
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mfd/lmp92001/core.h>
+#include <linux/mfd/lmp92001/debug.h>
+
+static const struct mfd_cell lmp92001_devs[] = {
+	{
+		.name = "lmp92001-gpio",
+		.of_compatible = "ti,lmp92001-gpio",
+	},
+	{
+		.name = "lmp92001-adc",
+		.of_compatible = "ti,lmp92001-adc",
+	},
+	{
+		.name = "lmp92001-dac",
+		.of_compatible = "ti,lmp92001-dac",
+	},
+};
+
+static struct reg_default lmp92001_defaults[] = {
+	{ LMP92001_SGEN,  0x40   },
+	{ LMP92001_SHIL,  0x00   },
+	{ LMP92001_SLOL,  0x00   },
+	{ LMP92001_CGEN,  0x00   },
+	{ LMP92001_CDAC,  0x03   },
+	{ LMP92001_CGPO,  0xFF   },
+	{ LMP92001_CINH,  0x00   },
+	{ LMP92001_CINL,  0x00   },
+	{ LMP92001_CAD1,  0x00   },
+	{ LMP92001_CAD2,  0x00   },
+	{ LMP92001_CAD3,  0x00   },
+	{ LMP92001_CTRIG, 0x00   },
+	{ LMP92001_CREF,  0x07   },
+	{ LMP92001_ADC1,  0x0000 },
+	{ LMP92001_ADC2,  0x0000 },
+	{ LMP92001_ADC3,  0x0000 },
+	{ LMP92001_ADC4,  0x0000 },
+	{ LMP92001_ADC5,  0x0000 },
+	{ LMP92001_ADC6,  0x0000 },
+	{ LMP92001_ADC7,  0x0000 },
+	{ LMP92001_ADC8,  0x0000 },
+	{ LMP92001_ADC9,  0x0000 },
+	{ LMP92001_ADC10, 0x0000 },
+	{ LMP92001_ADC11, 0x0000 },
+	{ LMP92001_ADC12, 0x0000 },
+	{ LMP92001_ADC13, 0x0000 },
+	{ LMP92001_ADC14, 0x0000 },
+	{ LMP92001_ADC15, 0x0000 },
+	{ LMP92001_ADC16, 0x0000 },
+	{ LMP92001_LIH1,  0x0FFF },
+	{ LMP92001_LIH2,  0x0FFF },
+	{ LMP92001_LIH3,  0x0FFF },
+	{ LMP92001_LIH9,  0x0FFF },
+	{ LMP92001_LIH10, 0x0FFF },
+	{ LMP92001_LIH11, 0x0FFF },
+	{ LMP92001_LIL1,  0x0000 },
+	{ LMP92001_LIL2,  0x0000 },
+	{ LMP92001_LIL3,  0x0000 },
+	{ LMP92001_LIL9,  0x0000 },
+	{ LMP92001_LIL10, 0x0000 },
+	{ LMP92001_LIL11, 0x0000 },
+	{ LMP92001_DAC1,  0x0000 },
+	{ LMP92001_DAC2,  0x0000 },
+	{ LMP92001_DAC3,  0x0000 },
+	{ LMP92001_DAC4,  0x0000 },
+	{ LMP92001_DAC5,  0x0000 },
+	{ LMP92001_DAC6,  0x0000 },
+	{ LMP92001_DAC7,  0x0000 },
+	{ LMP92001_DAC8,  0x0000 },
+	{ LMP92001_DAC9,  0x0000 },
+	{ LMP92001_DAC10, 0x0000 },
+	{ LMP92001_DAC11, 0x0000 },
+	{ LMP92001_DAC12, 0x0000 },
+	{ LMP92001_DALL,  0x0000 },
+};
+
+static bool lmp92001_reg_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LMP92001_ID:
+	case LMP92001_VER:
+	case LMP92001_SGEN:
+	case LMP92001_SGPI:
+	case LMP92001_SHIL:
+	case LMP92001_SLOL:
+	case LMP92001_CGEN:
+	case LMP92001_CDAC:
+	case LMP92001_CGPO:
+	case LMP92001_CINH:
+	case LMP92001_CINL:
+	case LMP92001_CAD1:
+	case LMP92001_CAD2:
+	case LMP92001_CAD3:
+	case LMP92001_ADC1:
+	case LMP92001_ADC2:
+	case LMP92001_ADC3:
+	case LMP92001_ADC4:
+	case LMP92001_ADC5:
+	case LMP92001_ADC6:
+	case LMP92001_ADC7:
+	case LMP92001_ADC8:
+	case LMP92001_ADC9:
+	case LMP92001_ADC10:
+	case LMP92001_ADC11:
+	case LMP92001_ADC12:
+	case LMP92001_ADC13:
+	case LMP92001_ADC14:
+	case LMP92001_ADC15:
+	case LMP92001_ADC16:
+	case LMP92001_ADC17:
+	case LMP92001_LIH1:
+	case LMP92001_LIH2:
+	case LMP92001_LIH3:
+	case LMP92001_LIH9:
+	case LMP92001_LIH10:
+	case LMP92001_LIH11:
+	case LMP92001_LIL1:
+	case LMP92001_LIL2:
+	case LMP92001_LIL3:
+	case LMP92001_LIL9:
+	case LMP92001_LIL10:
+	case LMP92001_LIL11:
+	case LMP92001_CREF:
+	case LMP92001_DAC1:
+	case LMP92001_DAC2:
+	case LMP92001_DAC3:
+	case LMP92001_DAC4:
+	case LMP92001_DAC5:
+	case LMP92001_DAC6:
+	case LMP92001_DAC7:
+	case LMP92001_DAC8:
+	case LMP92001_DAC9:
+	case LMP92001_DAC10:
+	case LMP92001_DAC11:
+	case LMP92001_DAC12:
+	case LMP92001_BLK0:
+	case LMP92001_BLK1:
+	case LMP92001_BLK2:
+	case LMP92001_BLK3:
+	case LMP92001_BLK4:
+	case LMP92001_BLK5:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lmp92001_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LMP92001_CGEN:
+	case LMP92001_CDAC:
+	case LMP92001_CGPO:
+	case LMP92001_CINH:
+	case LMP92001_CINL:
+	case LMP92001_CAD1:
+	case LMP92001_CAD2:
+	case LMP92001_CAD3:
+	case LMP92001_CTRIG:
+	case LMP92001_LIH1:
+	case LMP92001_LIH2:
+	case LMP92001_LIH3:
+	case LMP92001_LIH9:
+	case LMP92001_LIH10:
+	case LMP92001_LIH11:
+	case LMP92001_LIL1:
+	case LMP92001_LIL2:
+	case LMP92001_LIL3:
+	case LMP92001_LIL9:
+	case LMP92001_LIL10:
+	case LMP92001_LIL11:
+	case LMP92001_CREF:
+	case LMP92001_DAC1:
+	case LMP92001_DAC2:
+	case LMP92001_DAC3:
+	case LMP92001_DAC4:
+	case LMP92001_DAC5:
+	case LMP92001_DAC6:
+	case LMP92001_DAC7:
+	case LMP92001_DAC8:
+	case LMP92001_DAC9:
+	case LMP92001_DAC10:
+	case LMP92001_DAC11:
+	case LMP92001_DAC12:
+	case LMP92001_DALL:
+	case LMP92001_BLK0:
+	case LMP92001_BLK1:
+	case LMP92001_BLK4:
+	case LMP92001_BLK5:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lmp92001_reg_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LMP92001_SGEN:
+	case LMP92001_SGPI:
+	case LMP92001_SHIL:
+	case LMP92001_SLOL:
+	case LMP92001_CGEN:
+	case LMP92001_ADC1:
+	case LMP92001_ADC2:
+	case LMP92001_ADC3:
+	case LMP92001_ADC4:
+	case LMP92001_ADC5:
+	case LMP92001_ADC6:
+	case LMP92001_ADC7:
+	case LMP92001_ADC8:
+	case LMP92001_ADC9:
+	case LMP92001_ADC10:
+	case LMP92001_ADC11:
+	case LMP92001_ADC12:
+	case LMP92001_ADC13:
+	case LMP92001_ADC14:
+	case LMP92001_ADC15:
+	case LMP92001_ADC16:
+	case LMP92001_ADC17:
+	case LMP92001_BLK2:
+	case LMP92001_BLK3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+struct regmap_config lmp92001_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+
+	.cache_type = REGCACHE_RBTREE,
+
+	.reg_defaults = lmp92001_defaults,
+	.num_reg_defaults = ARRAY_SIZE(lmp92001_defaults),
+
+	.max_register = LMP92001_BLK5,
+	.readable_reg = lmp92001_reg_readable,
+	.writeable_reg = lmp92001_reg_writeable,
+	.volatile_reg = lmp92001_reg_volatile,
+};
+
+int lmp92001_device_init(struct lmp92001 *lmp92001, unsigned long id, int irq)
+{
+	int ret;
+	unsigned int comid, ver;
+
+	dev_set_drvdata(lmp92001->dev, lmp92001);
+
+	ret  = regmap_read(lmp92001->regmap, LMP92001_ID, &comid);
+	if (ret < 0) {
+		dev_err(lmp92001->dev, "failed to read Company ID: %d\n", ret);
+		goto exit;
+	}
+
+	ret  = regmap_read(lmp92001->regmap, LMP92001_VER, &ver);
+	if (ret < 0) {
+		dev_err(lmp92001->dev, "failed to read Version: %d\n", ret);
+		goto exit;
+	}
+
+	dev_info(lmp92001->dev, "Company ID 0x%.2x, Version 0x%.2x\n",
+			comid, ver);
+
+	ret = mfd_add_devices(lmp92001->dev, PLATFORM_DEVID_AUTO,
+				lmp92001_devs, ARRAY_SIZE(lmp92001_devs),
+				NULL, 0, NULL);
+	if (ret != 0) {
+		dev_err(lmp92001->dev, "failed to add children\n");
+		goto exit;
+	}
+
+	ret = lmp92001_debug_init(lmp92001);
+	if (ret < 0) {
+		dev_err(lmp92001->dev, "failed to initial debug fs.\n");
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
+void lmp92001_device_exit(struct lmp92001 *lmp92001)
+{
+	lmp92001_debug_exit(lmp92001);
+	mfd_remove_devices(lmp92001->dev);
+}
diff --git a/drivers/mfd/lmp92001-debug.c b/drivers/mfd/lmp92001-debug.c
new file mode 100644
index 0000000..d733e67
--- /dev/null
+++ b/drivers/mfd/lmp92001-debug.c
@@ -0,0 +1,67 @@
+/*
+ * lmp92001-debug.c - Debug file system for TI LMP92001
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/mfd/lmp92001/core.h>
+
+static ssize_t lmp92001_id_ver_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct lmp92001 *lmp92001 = dev_get_drvdata(dev);
+	int ret;
+	unsigned int comid, ver;
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_ID, &comid);
+	if (ret < 0) {
+		dev_err(lmp92001->dev, "failed to read Company ID: %d\n", ret);
+		return 0;
+	}
+
+	ret = regmap_read(lmp92001->regmap, LMP92001_VER, &ver);
+	if (ret < 0) {
+		dev_err(lmp92001->dev, "failed to read Version: %d\n", ret);
+		return 0;
+	}
+
+	ret = sprintf(buf, "Company ID 0x%02x (%d), Version 0x%02x (%d)\n",
+			comid, comid, ver, ver);
+
+	return ret;
+}
+static DEVICE_ATTR(lmp92001_id_ver, 0444, lmp92001_id_ver_show, NULL);
+
+int lmp92001_debug_init(struct lmp92001 *lmp92001)
+{
+	int ret;
+
+	ret = device_create_file(lmp92001->dev, &dev_attr_lmp92001_id_ver);
+	if (ret != 0)
+		dev_err(lmp92001->dev,
+			"unique ID attribute is not created: %d\n", ret);
+
+	return ret;
+}
+
+void lmp92001_debug_exit(struct lmp92001 *lmp92001)
+{
+	device_remove_file(lmp92001->dev, &dev_attr_lmp92001_id_ver);
+}
diff --git a/drivers/mfd/lmp92001-i2c.c b/drivers/mfd/lmp92001-i2c.c
new file mode 100644
index 0000000..bbb1dad
--- /dev/null
+++ b/drivers/mfd/lmp92001-i2c.c
@@ -0,0 +1,215 @@
+/*
+ * lmp92001-i2c.c - I2C access for TI LMP92001
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/lmp92001/core.h>
+
+static const unsigned short lmp92001_i2c_addresses[] = {
+	0x40, 0x42, 0x44, 0x46, 0x48, 0x4A, 0x4C, 0x4E, 0x50, I2C_CLIENT_END
+};
+
+/* TODO: To read/write block access, it may need to re-ordering endianness! */
+static int lmp92001_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret;
+
+	if (reg > 0xff)
+		return -EINVAL;
+
+	switch (reg) {
+	case LMP92001_ID ... LMP92001_CTRIG:
+	case LMP92001_CREF:
+		ret = i2c_smbus_read_byte_data(i2c, reg);
+		break;
+	case LMP92001_ADC1 ... LMP92001_LIL11:
+	case LMP92001_DAC1 ... LMP92001_DALL:
+		ret = i2c_smbus_read_word_swapped(i2c, reg);
+		break;
+	case LMP92001_BLK0 ... LMP92001_BLK5:
+		ret = i2c_smbus_read_block_data(i2c, reg,
+						(u8 *)((uintptr_t)*val));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (reg <= LMP92001_DALL)
+		*val = ret;
+
+	return 0;
+}
+
+static int lmp92001_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret;
+
+	if (reg > 0xff)
+		return -EINVAL;
+
+	switch (reg) {
+	case LMP92001_ID ... LMP92001_CTRIG:
+	case LMP92001_CREF:
+		ret = i2c_smbus_write_byte_data(i2c, reg, val);
+		break;
+	case LMP92001_ADC1 ... LMP92001_LIL11:
+	case LMP92001_DAC1 ... LMP92001_DALL:
+		ret = i2c_smbus_write_word_swapped(i2c, reg, val);
+		break;
+	/* To call this function/case, must be passed val as pointer */
+	case LMP92001_BLK0:
+	case LMP92001_BLK4:
+		ret = i2c_smbus_write_block_data(i2c, reg, 24,
+						(u8 *)((uintptr_t)val));
+		break;
+	case LMP92001_BLK1:
+	case LMP92001_BLK5:
+		ret = i2c_smbus_write_block_data(i2c, reg, 12,
+						(u8 *)((uintptr_t)val));
+		break;
+	case LMP92001_BLK2:
+		ret = i2c_smbus_write_block_data(i2c, reg, 34,
+						(u8 *)((uintptr_t)val));
+		break;
+	case LMP92001_BLK3:
+		ret = i2c_smbus_write_block_data(i2c, reg, 18,
+						(u8 *)((uintptr_t)val));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int lmp92001_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct lmp92001 *lmp92001;
+	int ret;
+
+	lmp92001 = devm_kzalloc(&i2c->dev, sizeof(struct lmp92001), GFP_KERNEL);
+	if (!lmp92001)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, lmp92001);
+	lmp92001->dev = &i2c->dev;
+
+	lmp92001_regmap_config.reg_read = lmp92001_reg_read;
+	lmp92001_regmap_config.reg_write = lmp92001_reg_write;
+
+	lmp92001->regmap = devm_regmap_init(&i2c->dev, NULL, &i2c->dev,
+						&lmp92001_regmap_config);
+	if (IS_ERR(lmp92001->regmap)) {
+		ret = PTR_ERR(lmp92001->regmap);
+		dev_err(lmp92001->dev, "failed to allocate register map: %d\n",
+				ret);
+		return ret;
+	}
+
+	return lmp92001_device_init(lmp92001, id->driver_data, i2c->irq);
+}
+
+static int lmp92001_i2c_remove(struct i2c_client *i2c)
+{
+	struct lmp92001 *lmp92001 = i2c_get_clientdata(i2c);
+
+	lmp92001_device_exit(lmp92001);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lmp92001_dt_ids[] = {
+	{ .compatible = "ti,lmp92001", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lmp92001_dt_ids);
+#endif
+
+static const struct i2c_device_id lmp92001_i2c_ids[] = {
+	{ "lmp92001" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, lmp92001_i2c_ids);
+
+static int lmp92001_i2c_detect(struct i2c_client *i2c,
+	struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = i2c->adapter;
+	s32 comid, ver;
+
+	if (!i2c_check_functionality(adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA |
+					I2C_FUNC_SMBUS_WORD_DATA |
+					I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	comid = i2c_smbus_read_byte_data(i2c, LMP92001_ID);
+	ver = i2c_smbus_read_byte_data(i2c, LMP92001_VER);
+
+	if (comid != 0x01 || ver != 0x10)
+		return -ENODEV;
+
+	return 0;
+}
+
+static struct i2c_driver lmp92001_i2c_driver = {
+	.driver = {
+		.name = "lmp92001",
+		.of_match_table = of_match_ptr(lmp92001_dt_ids),
+	},
+	.probe		= lmp92001_i2c_probe,
+	.remove		= lmp92001_i2c_remove,
+	.id_table	= lmp92001_i2c_ids,
+	.detect		= lmp92001_i2c_detect,
+	.address_list	= lmp92001_i2c_addresses,
+};
+
+static int __init lmp92001_i2c_init(void)
+{
+	return i2c_add_driver(&lmp92001_i2c_driver);
+}
+subsys_initcall(lmp92001_i2c_init);
+
+static void __exit lmp92001_i2c_exit(void)
+{
+	i2c_del_driver(&lmp92001_i2c_driver);
+}
+module_exit(lmp92001_i2c_exit);
+
+MODULE_DESCRIPTION("i2c driver for TI LMP92001");
+MODULE_AUTHOR("Abhisit Sangjan <s.abhisit@...il.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/lmp92001/core.h b/include/linux/mfd/lmp92001/core.h
new file mode 100644
index 0000000..9039000
--- /dev/null
+++ b/include/linux/mfd/lmp92001/core.h
@@ -0,0 +1,119 @@
+/*
+ * include/linux/mfd/lmp92001/core.h - Core interface for TI LMP92001
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MFD_LMP92001_CORE_H__
+#define __MFD_LMP92001_CORE_H__
+
+#include <linux/device.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+/*
+ * Register values.
+ */
+/* ID */
+#define LMP92001_ID	0x0E
+#define LMP92001_VER	0x0F
+/* STATUS */
+#define LMP92001_SGEN	0x10
+#define LMP92001_SGPI	0x11
+#define LMP92001_SHIL	0x12
+#define LMP92001_SLOL	0x13
+/* CONTROL */
+#define LMP92001_CGEN	0x14
+#define LMP92001_CDAC	0x15
+#define LMP92001_CGPO	0x16
+#define LMP92001_CINH	0x17
+#define LMP92001_CINL	0x18
+#define LMP92001_CAD1	0x19
+#define LMP92001_CAD2	0x1A
+#define LMP92001_CAD3	0x1B
+#define LMP92001_CTRIG	0x1C
+/* ADC OUTPUT DATA */
+#define LMP92001_ADC1	0x20
+#define LMP92001_ADC2	0x21
+#define LMP92001_ADC3	0x22
+#define LMP92001_ADC4	0x23
+#define LMP92001_ADC5	0x24
+#define LMP92001_ADC6	0x25
+#define LMP92001_ADC7	0x26
+#define LMP92001_ADC8	0x27
+#define LMP92001_ADC9	0x28
+#define LMP92001_ADC10	0x29
+#define LMP92001_ADC11	0x2A
+#define LMP92001_ADC12	0x2B
+#define LMP92001_ADC13	0x2C
+#define LMP92001_ADC14	0x2D
+#define LMP92001_ADC15	0x2E
+#define LMP92001_ADC16	0x2F
+#define LMP92001_ADC17	0x30
+/* ADC WINDOW COMPARATOR LIMITS */
+#define LMP92001_LIH1	0x40
+#define LMP92001_LIH2	0x41
+#define LMP92001_LIH3	0x42
+#define LMP92001_LIH9	0x43
+#define LMP92001_LIH10	0x44
+#define LMP92001_LIH11	0x45
+#define LMP92001_LIL1	0x46
+#define LMP92001_LIL2	0x47
+#define LMP92001_LIL3	0x48
+#define LMP92001_LIL9	0x49
+#define LMP92001_LIL10	0x4A
+#define LMP92001_LIL11	0x4B
+/* INTERNAL REFERENCE CONTROL */
+#define LMP92001_CREF	0x66
+/* DAC INPUT DATA */
+#define LMP92001_DAC1	0x80
+#define LMP92001_DAC2	0x81
+#define LMP92001_DAC3	0x82
+#define LMP92001_DAC4	0x83
+#define LMP92001_DAC5	0x84
+#define LMP92001_DAC6	0x85
+#define LMP92001_DAC7	0x86
+#define LMP92001_DAC8	0x87
+#define LMP92001_DAC9	0x88
+#define LMP92001_DAC10	0x89
+#define LMP92001_DAC11	0x8A
+#define LMP92001_DAC12	0x8B
+#define LMP92001_DALL	0x90
+/* MEMORY MAPPED BLOCK COMMANDS */
+#define LMP92001_BLK0	0xF0
+#define LMP92001_BLK1	0xF1
+#define LMP92001_BLK2	0xF2
+#define LMP92001_BLK3	0xF3
+#define LMP92001_BLK4	0xF4
+#define LMP92001_BLK5	0xF5
+
+struct lmp92001 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	struct mutex adc_lock;
+	struct mutex dac_lock;
+};
+
+extern struct regmap_config lmp92001_regmap_config;
+
+int lmp92001_device_init(struct lmp92001 *lmp92001, unsigned long id, int irq);
+void lmp92001_device_exit(struct lmp92001 *lmp92001);
+
+#endif /* __MFD_LMP92001_CORE_H__ */
diff --git a/include/linux/mfd/lmp92001/debug.h b/include/linux/mfd/lmp92001/debug.h
new file mode 100644
index 0000000..efef95f
--- /dev/null
+++ b/include/linux/mfd/lmp92001/debug.h
@@ -0,0 +1,28 @@
+/*
+ * include/linux/mfd/lmp92001/debug.h - Debug interface for TI 92001
+ *
+ * Copyright 2016-2017 Celestica Ltd.
+ *
+ * Author: Abhisit Sangjan <s.abhisit@...il.com>
+ *
+ * Inspired by wm831x driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MFD_LMP92001_DEBUG_H__
+#define __MFD_LMP92001_DEBUG_H__
+
+int lmp92001_debug_init(struct lmp92001 *lmp92001);
+void lmp92001_debug_exit(struct lmp92001 *lmp92001);
+
+#endif /* __MFD_LMP92001_DEBUG_H__ */
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ