linux-kernel - [PATCH] e1000: changed some expensive calls of udelay to usleep

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1503435747-29639-1-git-send-email-matthew.tan_1@nxp.com>
Date:   Tue, 22 Aug 2017 16:02:27 -0500
From:   nxf23276 <matthew.tan_1@....com>
To:     <jeffrey.t.kirsher@...el.com>
CC:     <michael.kardonik@....com>, <shannon.nelson@...el.com>,
        <carolyn.wyborny@...el.com>, <donald.c.skidmore@...el.com>,
        <bruce.w.allan@...el.com>, <john.ronciak@...el.com>,
        <mitch.a.williams@...el.com>, <intel-wired-lan@...ts.osuosl.org>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        nxf23276 <matthew.tan_1@....com>
Subject: [PATCH] e1000: changed some expensive calls of udelay to usleep_range

    Calls to udelay are not preemtable by userspace so userspace
    applications experience a large (~200us) latency when running on core
    0. Instead usleep_range can be used to be more friendly to userspace
    since it is preemtable. This is due to udelay using busy-wait loops
    while usleep_rang uses hrtimers instead. It is recommended to use
    udelay when the delay is <10us since at that precision overhead of
    usleep_range hrtimer setup causes issues. However, the replaced calls
    are for 50us and 100us so this should not be not an issue.

Signed-off-by: nxf23276 <matthew.tan_1@....com>
---
 drivers/net/ethernet/intel/e1000e/phy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index de13aea..ee6ab53 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -158,7 +158,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	 * the lower time out
 	 */
 	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
+		usleep_range(40, 60);
 		mdic = er32(MDIC);
 		if (mdic & E1000_MDIC_READY)
 			break;
@@ -183,7 +183,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		usleep_range(90, 110);
 
 	return 0;
 }
@@ -222,7 +222,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	 * the lower time out
 	 */
 	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
+		usleep_range(40, 60);
 		mdic = er32(MDIC);
 		if (mdic & E1000_MDIC_READY)
 			break;
@@ -246,7 +246,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		usleep_range(90, 110);
 
 	return 0;
 }
-- 
2.7.4