| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <599e3eb3-868d-2da6-4141-f69083917fb6@codeaurora.org>
Date: Mon, 28 Aug 2017 17:19:37 +0530
From: Arun Kumar Neelakantam <aneela@...eaurora.org>
To: Sricharan R <sricharan@...eaurora.org>, ohad@...ery.com,
bjorn.andersson@...aro.org, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 12/20] rpmsg: glink: Add support for TX intents
On 8/24/2017 12:51 PM, Sricharan R wrote:
> Intents are nothing but pre-allocated buffers of
> appropriate size that are allocated on the local
> side and communicated to the remote side and the
> remote stores the list of intent ids that it is
> informed.
>
> Later when remote side is intenting to send data,
> it picks up a right intent (based on the size) and
> sends the data buffer and the intent id. Local side
> receives the data and copies it to the local intent
> buffer.
>
> The whole idea is to avoid stalls on the transport
> for allocating memory, used for copy based transports.
>
> When the remote request to allocate buffers using
> CMD_RX_INTENT_REQ, we allocate buffers of requested
> size, store the buffer id locally and also communicate
> the intent id to the remote.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
Acked-by: Arun Kumar Neelakantam <aneela@...eaurora.org>
Regards,
Arun N
> ---
> drivers/rpmsg/qcom_glink_native.c | 167 +++++++++++++++++++++++++++++++++++++-
> drivers/rpmsg/qcom_glink_native.h | 3 +-
> drivers/rpmsg/qcom_glink_rpm.c | 3 +-
> drivers/rpmsg/qcom_glink_smem.c | 5 +-
> 4 files changed, 173 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 588a56c..7778e57 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -60,6 +60,26 @@ struct glink_defer_cmd {
> };
>
> /**
> + * struct glink_core_rx_intent - RX intent
> + * RX intent
> + *
> + * data: pointer to the data (may be NULL for zero-copy)
> + * id: remote or local intent ID
> + * size: size of the original intent (do not modify)
> + * reuse: To mark if the intent can be reused after first use
> + * in_use: To mark if intent is already in use for the channel
> + * offset: next write offset (initially 0)
> + */
> +struct glink_core_rx_intent {
> + void *data;
> + u32 id;
> + size_t size;
> + bool reuse;
> + bool in_use;
> + u32 offset;
> +};
> +
> +/**
> * struct qcom_glink - driver context, relates to one remote subsystem
> * @dev: reference to the associated struct device
> * @mbox_client: mailbox client
> @@ -117,6 +137,8 @@ enum {
> * @name: unique channel name/identifier
> * @lcid: channel id, in local space
> * @rcid: channel id, in remote space
> + * @intent_lock: lock for protection of @liids
> + * @liids: idr of all local intents
> * @buf: receive buffer, for gathering fragments
> * @buf_offset: write offset in @buf
> * @buf_size: size of current @buf
> @@ -137,6 +159,9 @@ struct glink_channel {
> unsigned int lcid;
> unsigned int rcid;
>
> + spinlock_t intent_lock;
> + struct idr liids;
> +
> void *buf;
> int buf_offset;
> int buf_size;
> @@ -154,6 +179,9 @@ struct glink_channel {
> #define RPM_CMD_OPEN 2
> #define RPM_CMD_CLOSE 3
> #define RPM_CMD_OPEN_ACK 4
> +#define RPM_CMD_INTENT 5
> +#define RPM_CMD_RX_INTENT_REQ 7
> +#define RPM_CMD_RX_INTENT_REQ_ACK 8
> #define RPM_CMD_TX_DATA 9
> #define RPM_CMD_CLOSE_ACK 11
> #define RPM_CMD_TX_DATA_CONT 12
> @@ -172,12 +200,14 @@ static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
>
> /* Setup glink internal glink_channel data */
> spin_lock_init(&channel->recv_lock);
> + spin_lock_init(&channel->intent_lock);
> channel->glink = glink;
> channel->name = kstrdup(name, GFP_KERNEL);
>
> init_completion(&channel->open_req);
> init_completion(&channel->open_ack);
>
> + idr_init(&channel->liids);
> kref_init(&channel->refcount);
>
> return channel;
> @@ -187,6 +217,11 @@ static void qcom_glink_channel_release(struct kref *ref)
> {
> struct glink_channel *channel = container_of(ref, struct glink_channel,
> refcount);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&channel->intent_lock, flags);
> + idr_destroy(&channel->liids);
> + spin_unlock_irqrestore(&channel->intent_lock, flags);
>
> kfree(channel->name);
> kfree(channel);
> @@ -424,6 +459,130 @@ static void qcom_glink_receive_version_ack(struct qcom_glink *glink,
> }
> }
>
> +/**
> + * qcom_glink_send_intent_req_ack() - convert an rx intent request ack cmd to
> + wire format and transmit
> + * @glink: The transport to transmit on.
> + * @channel: The glink channel
> + * @granted: The request response to encode.
> + *
> + * Return: 0 on success or standard Linux error code.
> + */
> +static int qcom_glink_send_intent_req_ack(struct qcom_glink *glink,
> + struct glink_channel *channel,
> + bool granted)
> +{
> + struct glink_msg msg;
> +
> + msg.cmd = cpu_to_le16(RPM_CMD_RX_INTENT_REQ_ACK);
> + msg.param1 = cpu_to_le16(channel->lcid);
> + msg.param2 = cpu_to_le32(granted);
> +
> + qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
> +
> + return 0;
> +}
> +
> +/**
> + * qcom_glink_advertise_intent - convert an rx intent cmd to wire format and
> + * transmit
> + * @glink: The transport to transmit on.
> + * @channel: The local channel
> + * @size: The intent to pass on to remote.
> + *
> + * Return: 0 on success or standard Linux error code.
> + */
> +static int qcom_glink_advertise_intent(struct qcom_glink *glink,
> + struct glink_channel *channel,
> + struct glink_core_rx_intent *intent)
> +{
> + struct command {
> + u16 id;
> + u16 lcid;
> + u32 count;
> + u32 size;
> + u32 liid;
> + } __packed;
> + struct command cmd;
> +
> + cmd.id = cpu_to_le16(RPM_CMD_INTENT);
> + cmd.lcid = cpu_to_le16(channel->lcid);
> + cmd.count = cpu_to_le32(1);
> + cmd.size = cpu_to_le32(intent->size);
> + cmd.liid = cpu_to_le32(intent->id);
> +
> + qcom_glink_tx(glink, &cmd, sizeof(cmd), NULL, 0, true);
> +
> + return 0;
> +}
> +
> +static struct glink_core_rx_intent *
> +qcom_glink_alloc_intent(struct qcom_glink *glink,
> + struct glink_channel *channel,
> + size_t size,
> + bool reuseable)
> +{
> + struct glink_core_rx_intent *intent;
> + int ret;
> + unsigned long flags;
> +
> + intent = kzalloc(sizeof(*intent), GFP_KERNEL);
> +
> + if (!intent)
> + return NULL;
> +
> + intent->data = kzalloc(size, GFP_KERNEL);
> + if (!intent->data)
> + return NULL;
> +
> + spin_lock_irqsave(&channel->intent_lock, flags);
> + ret = idr_alloc_cyclic(&channel->liids, intent, 1, -1, GFP_ATOMIC);
> + if (ret < 0) {
> + spin_unlock_irqrestore(&channel->intent_lock, flags);
> + return NULL;
> + }
> + spin_unlock_irqrestore(&channel->intent_lock, flags);
> +
> + intent->id = ret;
> + intent->size = size;
> + intent->reuse = reuseable;
> +
> + return intent;
> +}
> +
> +/**
> + * qcom_glink_handle_intent_req() - Receive a request for rx_intent
> + * from remote side
> + * if_ptr: Pointer to the transport interface
> + * rcid: Remote channel ID
> + * size: size of the intent
> + *
> + * The function searches for the local channel to which the request for
> + * rx_intent has arrived and allocates and notifies the remote back
> + */
> +static void qcom_glink_handle_intent_req(struct qcom_glink *glink,
> + u32 cid, size_t size)
> +{
> + struct glink_core_rx_intent *intent;
> + struct glink_channel *channel;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&glink->idr_lock, flags);
> + channel = idr_find(&glink->rcids, cid);
> + spin_unlock_irqrestore(&glink->idr_lock, flags);
> +
> + if (!channel) {
> + pr_err("%s channel not found for cid %d\n", __func__, cid);
> + return;
> + }
> +
> + intent = qcom_glink_alloc_intent(glink, channel, size, false);
> + if (intent)
> + qcom_glink_advertise_intent(glink, channel, intent);
> +
> + qcom_glink_send_intent_req_ack(glink, channel, !!intent);
> +}
> +
> static int qcom_glink_rx_defer(struct qcom_glink *glink, size_t extra)
> {
> struct glink_defer_cmd *dcmd;
> @@ -586,6 +745,7 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
> case RPM_CMD_VERSION_ACK:
> case RPM_CMD_CLOSE:
> case RPM_CMD_CLOSE_ACK:
> + case RPM_CMD_RX_INTENT_REQ:
> ret = qcom_glink_rx_defer(glink, 0);
> break;
> case RPM_CMD_OPEN_ACK:
> @@ -1003,6 +1163,9 @@ static void qcom_glink_work(struct work_struct *work)
> case RPM_CMD_CLOSE_ACK:
> qcom_glink_rx_close_ack(glink, param1);
> break;
> + case RPM_CMD_RX_INTENT_REQ:
> + qcom_glink_handle_intent_req(glink, param1, param2);
> + break;
> default:
> WARN(1, "Unknown defer object %d\n", cmd);
> break;
> @@ -1015,7 +1178,8 @@ static void qcom_glink_work(struct work_struct *work)
> struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> unsigned long features,
> struct qcom_glink_pipe *rx,
> - struct qcom_glink_pipe *tx)
> + struct qcom_glink_pipe *tx,
> + bool intentless)
> {
> int irq;
> int ret;
> @@ -1030,6 +1194,7 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> glink->rx_pipe = rx;
>
> glink->features = features;
> + glink->intentless = intentless;
>
> mutex_init(&glink->tx_lock);
> spin_lock_init(&glink->rx_lock);
> diff --git a/drivers/rpmsg/qcom_glink_native.h b/drivers/rpmsg/qcom_glink_native.h
> index 456ec79..92e0881 100644
> --- a/drivers/rpmsg/qcom_glink_native.h
> +++ b/drivers/rpmsg/qcom_glink_native.h
> @@ -37,7 +37,8 @@ struct qcom_glink_pipe {
> struct qcom_glink *qcom_glink_native_probe(struct device *dev,
> unsigned long features,
> struct qcom_glink_pipe *rx,
> - struct qcom_glink_pipe *tx);
> + struct qcom_glink_pipe *tx,
> + bool intentless);
> void qcom_glink_native_remove(struct qcom_glink *glink);
>
> void qcom_glink_native_unregister(struct qcom_glink *glink);
> diff --git a/drivers/rpmsg/qcom_glink_rpm.c b/drivers/rpmsg/qcom_glink_rpm.c
> index 7d039cd..5a86e08 100644
> --- a/drivers/rpmsg/qcom_glink_rpm.c
> +++ b/drivers/rpmsg/qcom_glink_rpm.c
> @@ -305,7 +305,8 @@ static int glink_rpm_probe(struct platform_device *pdev)
> glink = qcom_glink_native_probe(&pdev->dev,
> 0,
> &rx_pipe->native,
> - &tx_pipe->native);
> + &tx_pipe->native,
> + true);
> if (IS_ERR(glink))
> return PTR_ERR(glink);
>
> diff --git a/drivers/rpmsg/qcom_glink_smem.c b/drivers/rpmsg/qcom_glink_smem.c
> index b78874b..9d73ced 100644
> --- a/drivers/rpmsg/qcom_glink_smem.c
> +++ b/drivers/rpmsg/qcom_glink_smem.c
> @@ -284,8 +284,9 @@ struct qcom_glink *qcom_glink_smem_register(struct device *parent,
> *tx_pipe->head = 0;
>
> glink = qcom_glink_native_probe(dev,
> - GLINK_FEATURE_TRACER_PKT,
> - &rx_pipe->native, &tx_pipe->native);
> + GLINK_FEATURE_INTENT_REUSE,
> + &rx_pipe->native, &tx_pipe->native,
> + false);
> if (IS_ERR(glink)) {
> ret = PTR_ERR(glink);
> goto err_put_dev;
Powered by blists - more mailing lists