[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170828142915.27020-7-jbrunet@baylibre.com>
Date: Mon, 28 Aug 2017 16:29:08 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>
Cc: Jerome Brunet <jbrunet@...libre.com>, linux-mmc@...r.kernel.org,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 06/13] mmc: meson-gx: fix dual data rate mode frequencies
In DDR modes, meson mmc controller requires an input rate twice as fast
as the output rate
Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Reviewed-by: Kevin Hilman <khilman@...libre.com>
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 41 +++++++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 7800a7ace2de..341e5a1b32cc 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -262,14 +262,29 @@ static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
mmc_get_dma_dir(data));
}
-static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
+static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios)
+{
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_MMC_HS400)
+ return true;
+
+ return false;
+}
+
+static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios)
{
struct mmc_host *mmc = host->mmc;
+ unsigned long rate = ios->clock;
int ret;
u32 cfg;
+ /* DDR modes require higher module clock */
+ if (meson_mmc_timing_is_ddr(ios))
+ rate <<= 1;
+
/* Same request - bail-out */
- if (host->req_rate == clk_rate)
+ if (host->req_rate == rate)
return 0;
/* stop clock */
@@ -278,25 +293,29 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
writel(cfg, host->regs + SD_EMMC_CFG);
host->req_rate = 0;
- if (!clk_rate) {
+ if (!rate) {
mmc->actual_clock = 0;
/* return with clock being stopped */
return 0;
}
- ret = clk_set_rate(host->mmc_clk, clk_rate);
+ ret = clk_set_rate(host->mmc_clk, rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
- clk_rate, ret);
+ rate, ret);
return ret;
}
- host->req_rate = clk_rate;
+ host->req_rate = rate;
mmc->actual_clock = clk_get_rate(host->mmc_clk);
+ /* We should report the real output frequency of the controller */
+ if (meson_mmc_timing_is_ddr(ios))
+ mmc->actual_clock >>= 1;
+
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
- if (clk_rate != mmc->actual_clock)
- dev_dbg(host->dev, "requested rate was %lu\n", clk_rate);
+ if (ios->clock != mmc->actual_clock)
+ dev_dbg(host->dev, "requested rate was %u\n", ios->clock);
/* (re)start clock */
cfg = readl(host->regs + SD_EMMC_CFG);
@@ -490,16 +509,14 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
val &= ~CFG_DDR;
- if (ios->timing == MMC_TIMING_UHS_DDR50 ||
- ios->timing == MMC_TIMING_MMC_DDR52 ||
- ios->timing == MMC_TIMING_MMC_HS400)
+ if (meson_mmc_timing_is_ddr(ios))
val |= CFG_DDR;
val &= ~CFG_CHK_DS;
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
- err = meson_mmc_clk_set(host, ios->clock);
+ err = meson_mmc_clk_set(host, ios);
if (err)
dev_err(host->dev, "Failed to set clock: %d\n,", err);
--
2.9.5
Powered by blists - more mailing lists