[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c6966f66-98bd-5271-a681-ed72c52805f6@redhat.com>
Date: Mon, 28 Aug 2017 18:11:38 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: Rob Herring <robh@...nel.org>
Cc: Wolfram Sang <wsa@...-dreams.de>,
Guenter Roeck <linux@...ck-us.net>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Sebastian Reichel <sre@...nel.org>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Liam Breck <liam@...workimprov.net>,
Tony Lindgren <tony@...mide.com>, linux-i2c@...r.kernel.org,
linux-pm@...r.kernel.org, platform-driver-x86@...r.kernel.org,
linux-kernel@...r.kernel.org, devel@...verdev.osuosl.org,
Frank Rowand <frowand.list@...il.com>,
devicetree@...r.kernel.org,
"Yueyao (Nathan) Zhu" <yueyao@...gle.com>
Subject: Re: [PATCH v2 04/14] staging: typec: fusb302: Get max snk mv/ma/mw
from device-properties
Hi,
On 17-08-17 23:41, Rob Herring wrote:
> On Tue, Aug 15, 2017 at 10:04:52PM +0200, Hans de Goede wrote:
>> This is board specific info so it should come from board config, such
>> as devicetree.
>>
>> I've chosen to prefix these with "fcs," treating them as fusb302 driver
>> specific for now. We may want to revisit this and replace these with
>> properties which are part of a (to be written) generic type-c controller
>> devicetree binding.
>>
>> Since this commit adds new dt-properties it also adds devicetree-bindings
>> documentation (which so far was absent for the fusb302 driver).
>>
>> Cc: Rob Herring <robh+dt@...nel.org>
>> Cc: Frank Rowand <frowand.list@...il.com>
>> Cc: devicetree@...r.kernel.org
>> Cc: "Yueyao (Nathan) Zhu" <yueyao@...gle.com>
>> Signed-off-by: Hans de Goede <hdegoede@...hat.com>
>> ---
>> Changes in v2:
>> -Use micro... instead of mili...
>> -Add devicetree bindings documentation
>> ---
>> .../devicetree/bindings/usb/fcs,fusb302.txt | 29 ++++++++++++++++++++++
>> drivers/staging/typec/fusb302/TODO | 4 +++
>> drivers/staging/typec/fusb302/fusb302.c | 18 +++++++++++++-
>> 3 files changed, 50 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/devicetree/bindings/usb/fcs,fusb302.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
>> new file mode 100644
>> index 0000000..ffc6c87
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
>> @@ -0,0 +1,29 @@
>> +Fairchild FUSB302 Type-C Port controllers
>> +
>> +Required properties :
>> +- compatible : "fcs,fusb302"
>> +- reg : I2C slave address
>> +- interrupts : Interrupt specifier
>> +
>> +Optional properties :
>> +- fcs,max-snk-microvolt : Maximum voltage to negotiate when configured as sink
>> +- fcs,max-snk-microamp : Maximum current to negotiate when configured as sink
>> +- fcs,max-snk-microwatt : Maximum power to negotiate when configured as sink
>> + If this is less then max-snk-microvolt *
>> + max-snk-microamp then the configured current will
>> + be clamped.
>> +- fcs,operating-snk-microwatt :
>
> Might as well spell out sink.
Fixed for v3.
> Otherwise,
>
> Acked-by: Rob Herring <robh@...nel.org>
Thank you, added to v3 of this patch-set.
Regards,
Hans
>
>> + Minimum amount of power accepted from a sink
>> + when negotiating
>> +
>> +Example:
>> +
>> +fusb302: typec-portc@54 {
>> + compatible = "fcs,fusb302";
>> + reg = <0x54>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + fcs,max-snk-microvolt = <12000000>;
>> + fcs,max-snk-microamp = <3000000>;
>> + fcs,max-snk-microwatt = <36000000>;
>> +};
Powered by blists - more mailing lists