[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1503999271-15712-1-git-send-email-daniel.lezcano@linaro.org>
Date: Tue, 29 Aug 2017 11:34:19 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: tglx@...utronix.de
Cc: linux-kernel@...r.kernel.org, Dong Aisheng <aisheng.dong@....com>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
Bai Ping <ping.bai@....com>, Rob Herring <robh@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Subject: [PATCH 1/9] dt-bindings: timer: Add nxp tpm timer binding doc
From: Dong Aisheng <aisheng.dong@....com>
Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM)
binding doc.
Cc: Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Bai Ping <ping.bai@....com>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
.../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
new file mode 100644
index 0000000..b4aa7dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible : should be "fsl,imx7ulp-tpm"
+- reg : Specifies base physical address and size of the register sets
+ for the clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain
+ an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm@...60000 {
+ compatible = "fsl,imx7ulp-tpm";
+ reg = <0x40260000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&clks IMX7ULP_CLK_LPTPM5>;
+ clock-names = "ipg", "per";
+};
--
2.7.4
Powered by blists - more mailing lists