linux-kernel - Re: [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <2be78f06-8c3a-0076-a19b-07d501c3d460@samsung.com>
Date:   Tue, 29 Aug 2017 11:52:16 +0900
From:   Hoegeun Kwon <hoegeun.kwon@...sung.com>
To:     thierry.reding@...il.com, airlied@...ux.ie, robh+dt@...nel.org,
        mark.rutland@....com, catalin.marinas@....com, will.deacon@....com,
        kgene@...nel.org, krzk@...nel.org
Cc:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
        javier@....samsung.com, a.hajda@...sung.com,
        Hoegeun Kwon <hoegeun.kwon@...sung.com>
Subject: Re: [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and
 delay from rinato dts

Hi Krzysztof,

The driver has been merged into exynos-drm-misc.
Could you please check this patch(3/3).

Best regards,
Hoegeun

On 07/13/2017 11:20 AM, Hoegeun Kwon wrote:
> The display-timing and delay are included in the panel driver. So it
> should be removed in dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
> ---
>   arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
>   1 file changed, 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> index 443e0c9..6b70c8d 100644
> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> @@ -242,28 +242,6 @@
>   		vci-supply = <&ldo20_reg>;
>   		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
>   		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
> -		power-on-delay= <30>;
> -		power-off-delay= <120>;
> -		reset-delay = <5>;
> -		init-delay = <100>;
> -		flip-horizontal;
> -		flip-vertical;
> -		panel-width-mm = <29>;
> -		panel-height-mm = <29>;
> -
> -		display-timings {
> -			timing-0 {
> -				clock-frequency = <4600000>;
> -				hactive = <320>;
> -				vactive = <320>;
> -				hfront-porch = <1>;
> -				hback-porch = <1>;
> -				hsync-len = <1>;
> -				vfront-porch = <150>;
> -				vback-porch = <1>;
> -				vsync-len = <2>;
> -			};
> -		};
>   
>   		port {
>   			dsi_in: endpoint {