lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 30 Aug 2017 18:21:48 +0530
From:   Vijay Viswanath <vviswana@...eaurora.org>
To:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        will.deacon@....com
Cc:     linux-arm-kernel@...ts.infradead.org, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        asutoshd@...eaurora.org, stummala@...eaurora.org,
        riteshh@...eaurora.org, subhashj@...eaurora.org,
        Vijay Viswanath <vviswana@...eaurora.org>
Subject: [PATCH v1 4/5] mmc: sdhci-msm: Add ops to do sdhc register write

Register writes which change voltage of IO lines or turn the IO bus
on/off require controller to be ready before progressing further. When
the controller is ready, it will generate a power irq which needs to be
handled. The thread which initiated the register write should wait for
power irq to complete. This will be done through the new sdhc msm write
APIs which will check whether the particular write can trigger a power
irq and wait for it with a timeout if it is expected.
The SDHC core power control IRQ gets triggered when -
* There is a state change in power control bit (bit 0)
  of SDHCI_POWER_CONTROL register.
* There is a state change in 1.8V enable bit (bit 3) of
  SDHCI_HOST_CONTROL2 register.
* Bit 1 of SDHCI_SOFTWARE_RESET is set.

Signed-off-by: Vijay Viswanath <vviswana@...eaurora.org>
---
 drivers/mmc/host/sdhci-msm.c | 69 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e3e385e..a4a78b5 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1070,7 +1070,6 @@ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type)
 			__WARN_printf("%s: pwr_irq for req: (%d) timed out\n",
 					mmc_hostname(host->mmc), req_type);
 	}
-	msm_host->pwr_irq_flag = 0;
 	pr_debug("%s: %s: request %d done\n", mmc_hostname(host->mmc),
 			__func__, req_type);
 }
@@ -1250,6 +1249,70 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	__sdhci_msm_set_clock(host, clock);
 }
 
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+/*
+ * Platform specific register write functions. This is so that, if any
+ * register write needs to be followed up by platform specific actions,
+ * they can be added here. These functions can go to sleep when writes
+ * to certain registers are done.
+ * These functions are relying on sdhci_set_ios not using spinlock.
+ */
+static int __sdhci_msm_check_write(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	u32 req_type = 0;
+
+	switch (reg) {
+	case SDHCI_HOST_CONTROL2:
+		req_type = (val & SDHCI_CTRL_VDD_180) ? REQ_IO_LOW :
+			REQ_IO_HIGH;
+		break;
+	case SDHCI_SOFTWARE_RESET:
+		if (host->pwr && (val & SDHCI_RESET_ALL))
+			req_type = REQ_BUS_OFF;
+		break;
+	case SDHCI_POWER_CONTROL:
+		req_type = !val ? REQ_BUS_OFF : REQ_BUS_ON;
+		break;
+	}
+
+	if (req_type) {
+		msm_host->pwr_irq_flag = 0;
+		/*
+		 * Since this register write may trigger a power irq, ensure
+		 * all previous register writes are complete by this point.
+		 */
+		mb();
+	}
+	return req_type;
+}
+
+/* This function may sleep*/
+static void sdhci_msm_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	u32 req_type = 0;
+
+	req_type = __sdhci_msm_check_write(host, val, reg);
+	writew_relaxed(val, host->ioaddr + reg);
+
+	if (req_type)
+		sdhci_msm_check_power_status(host, req_type);
+}
+
+/* This function may sleep*/
+static void sdhci_msm_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 req_type = 0;
+
+	req_type = __sdhci_msm_check_write(host, val, reg);
+
+	writeb_relaxed(val, host->ioaddr + reg);
+
+	if (req_type)
+		sdhci_msm_check_power_status(host, req_type);
+}
+#endif
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},
@@ -1264,6 +1327,10 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
 	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+	.write_w = sdhci_msm_writew,
+	.write_b = sdhci_msm_writeb,
+#endif
 };
 
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
-- 
 Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Powered by blists - more mailing lists