| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1504102118-7152-2-git-send-email-suganath-prabu.subramani@broadcom.com>
Date: Wed, 30 Aug 2017 19:38:25 +0530
From: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>
To: linux-scsi@...r.kernel.org
Cc: Sathya.Prakash@...adcom.com, linux-kernel@...r.kernel.org,
sreekanth.reddy@...adcom.com, linux-nvme@...ts.infradead.org,
Suganath Prabu S <suganath-prabu.subramani@...adcom.com>,
Chaitra P B <chaitra.basappa@...adcom.com>
Subject: [v5 01/14] Update MPI Header
Update MPI Files for NVMe support
Signed-off-by: Chaitra P B <chaitra.basappa@...adcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 43 ++-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 564 +++++++++++++++++++++++++++++++++--
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 11 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 282 +++++++++++++++++-
drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 112 +++++++
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 14 +-
6 files changed, 992 insertions(+), 34 deletions(-)
create mode 100644 drivers/scsi/mpt3sas/mpi/mpi2_pci.h
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index a9a659f..bc59058 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.42
+ * mpi2.h Version: 02.00.48
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -103,6 +103,16 @@
* 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT.
* 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT
* 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT
+ * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines
+ * to be unique within first 32 characters.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -142,7 +152,7 @@
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x2A)
+#define MPI2_HEADER_VERSION_UNIT (0x30)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -249,6 +259,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
+/* Defines for V7A/V7R HostDiagnostic Register */
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800)
+
#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
#define MPI2_DIAG_HCB_MODE (0x00000100)
@@ -367,6 +383,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C)
+#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10)
#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
@@ -425,6 +442,13 @@ typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
Mpi25FastPathSCSIIORequestDescriptor_t,
*pMpi25FastPathSCSIIORequestDescriptor_t;
+/*PCIe Encapsulated Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedRequestDescriptor_t,
+ *pMpi26PCIeEncapsulatedRequestDescriptor_t;
+
/*union of Request Descriptors */
typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
@@ -433,6 +457,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+ MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
U64 Words;
} MPI2_REQUEST_DESCRIPTOR_UNION,
*PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
@@ -450,6 +475,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
* Atomic SCSI Target Request Descriptor
* Atomic RAID Accelerator Request Descriptor
* Atomic Fast Path SCSI IO Request Descriptor
+ * Atomic PCIe Encapsulated Request Descriptor
*/
/*Atomic Request Descriptor */
@@ -487,6 +513,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06)
+#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
/*values for marking a reply descriptor as unused */
@@ -565,6 +592,13 @@ typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
*pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+/*PCIe Encapsulated Success Reply Descriptor */
+typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
+ *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
+
/*union of Reply Descriptors */
typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
@@ -574,6 +608,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+ MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
+ PCIeEncapsulatedSuccess;
U64 Words;
} MPI2_REPLY_DESCRIPTORS_UNION,
*PTR_MPI2_REPLY_DESCRIPTORS_UNION,
@@ -616,6 +652,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
+#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33)
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
@@ -1162,6 +1199,8 @@ typedef union _MPI25_SGE_IO_UNION {
#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10)
/*Data Location Address Space */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index fa61baf..0666e71 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.35
+ * mpi2_cnfg.h Version: 02.00.40
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -189,6 +189,35 @@
* MPI2_CONFIG_PAGE_BIOS_1.
* 08-25-15 02.00.34 Bumped Header Version.
* 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
+ * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added Link field to PCIe Link Pages
+ * Added EnclosureLevel and ConnectorName to PCIe
+ * Device Page 0.
+ * Added define for PCIE IoUnit page 1 max rate shift.
+ * Added comment for reserved ExtPageTypes.
+ * Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * Added NegotiatedLinkRate and NegotiatedPortWidth to
+ * PCIe device page 0.
+ * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
+ * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
+ * Changed declaration of ConnectorName in PCIe DevicePage0
+ * to match SAS DevicePage 0.
+ * Added SATADeviceWaitTime to IO Unit Page 11.
+ * Added MPI26_MFGPAGE_DEVID_SAS4008
+ * Added x16 PCIe width to IO Unit Page 7
+ * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
+ * phy data.
+ * Added InitStatus to PCIe IO Unit Page 1 header.
+ * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
+ * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
+ * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
+ * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
+ * Added ChassisSlot field to SAS Enclosure Page 0.
+ * Added ChassisSlot Valid bit (bit 5) to the Flags field
+ * in SAS Enclosure Page 0.
* --------------------------------------------------------------------------
*/
@@ -272,6 +301,10 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E)
/*****************************************************************************
@@ -339,6 +372,12 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
+/*Enclosure PageAddress format */
+#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
+
+#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
/*RAID Configuration PageAddress format */
#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
@@ -365,6 +404,33 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+/*PCIe Switch PageAddress format */
+#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000)
+#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000)
+
+#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
+
+
+/*PCIe Device PageAddress format */
+#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
+
+/*PCIe Link PageAddress format */
+#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF)
+
+
+
/****************************************************************************
* Configuration messages
****************************************************************************/
@@ -484,6 +550,12 @@ typedef struct _MPI2_CONFIG_REPLY {
#define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD)
#define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE)
#define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF)
+#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0)
+#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
+#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
+
+#define MPI26_MFGPAGE_DEVID_SAS4008 (0x00A1)
+
/*Manufacturing Page 0 */
@@ -726,6 +798,12 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13)
/*defines for the Location field */
#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
@@ -736,6 +814,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
+/*defines for the Slot field */
+#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
+
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
*one and check the value returned for NumPhys at runtime.
@@ -999,11 +1080,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10)
/*defines for IO Unit Page 7 PCIeSpeed field */
#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03)
/*defines for IO Unit Page 7 ProcessorState field */
#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
@@ -1970,6 +2053,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
#define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
+#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C)
/*values for AttachedPhyInfo fields */
@@ -2037,12 +2121,14 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
#define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C)
/*values for SAS HwLinkRate fields */
@@ -2051,11 +2137,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
+#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
#define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
+#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C)
@@ -2240,11 +2328,13 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
#define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
+#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0)
#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
#define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
+#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C)
/*see mpi2_sas.h for values for
*SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
@@ -3158,37 +3248,29 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
/*SAS Enclosure Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER
- Header; /*0x00 */
- U32
- Reserved1; /*0x08 */
- U64
- EnclosureLogicalID; /*0x0C */
- U16
- Flags; /*0x14 */
- U16
- EnclosureHandle; /*0x16 */
- U16
- NumSlots; /*0x18 */
- U16
- StartSlot; /*0x1A */
- U8
- Reserved2; /*0x1C */
- U8
- EnclosureLevel; /*0x1D */
- U16
- SEPDevHandle; /*0x1E */
- U32
- Reserved3; /*0x20 */
- U32
- Reserved4; /*0x24 */
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U64 EnclosureLogicalID; /*0x0C */
+ U16 Flags; /*0x14 */
+ U16 EnclosureHandle; /*0x16 */
+ U16 NumSlots; /*0x18 */
+ U16 StartSlot; /*0x1A */
+ U8 ChassisSlot; /*0x1C */
+ U8 EnclosureLeve; /*0x1D */
+ U16 SEPDevHandle; /*0x1E */
+ U32 Reserved3; /*0x20 */
+ U32 Reserved4; /*0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
+ Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
+ MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
+ Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
/*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
@@ -3198,6 +3280,18 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
+#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
+
+/*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
+#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
+#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
+#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
+#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
+#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
/****************************************************************************
* Log Config Page
@@ -3497,4 +3591,422 @@ typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
/*PageVersion should be provided by product-specific code */
+
+
+/****************************************************************************
+* values for fields used by several types of PCIe Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
+/*link rates used for Negotiated Physical Link Rate */
+#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
+#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
+#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02)
+#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03)
+#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04)
+#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05)
+
+
+/****************************************************************************
+* PCIe IO Unit Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe IO Unit Page 0 */
+
+typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 NegotiatedLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo;/*0x04 */
+ U16 AttachedDevHandle; /*0x08 */
+ U16 ControllerDevHandle; /*0x0A */
+ U32 EnumerationStatus; /*0x0C */
+ U32 Reserved1; /*0x10 */
+} MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
+ Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
+#define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 NumPhys; /*0x0C */
+ U8 InitStatus; /*0x0D */
+ U16 Reserved3; /*0x0E */
+ MPI26_PCIE_IO_UNIT0_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PIOUNIT_0,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
+ Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
+
+#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 0 LinkFlags */
+#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
+
+/*values for PCIe IO Unit Page 0 PhyFlags */
+#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+/*values for PCIe IO Unit Page 0 EnumerationStatus */
+#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
+#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000)
+
+
+/*PCIe IO Unit Page 1 */
+
+typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
+ U8 Link; /*0x00 */
+ U8 LinkFlags; /*0x01 */
+ U8 PhyFlags; /*0x02 */
+ U8 MaxMinLinkRate; /*0x03 */
+ U32 ControllerPhyDeviceInfo; /*0x04 */
+ U32 Reserved1; /*0x08 */
+} MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
+ Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
+
+/*values for LinkFlags */
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
+#define MPI26_PCIE_IOUNIT1_PHY_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 ControlFlags; /*0x08 */
+ U16 Reserved; /*0x0A */
+ U16 AdditionalControlFlags; /*0x0C */
+ U16 NVMeMaxQueueDepth; /*0x0E */
+ U8 NumPhys; /*0x10 */
+ U8 Reserved1; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ MPI26_PCIE_IO_UNIT1_PHY_DATA
+ PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
+} MPI26_CONFIG_PAGE_PIOUNIT_1,
+ *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
+ Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
+
+#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00)
+
+/*values for PCIe IO Unit Page 1 PhyFlags */
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01)
+
+/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
+#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+
+/****************************************************************************
+* PCIe Switch Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Switch Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 DevHandle; /*0x0C */
+ U16 ParentDevHandle; /*0x0E */
+ U8 NumPorts; /*0x10 */
+ U8 PCIeLevel; /*0x11 */
+ U16 Reserved3; /*0x12 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+ U32 Reserved6; /*0x1C */
+} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
+ Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
+
+#define MPI26_PCIESWITCH0_PAGEVERSION (0x00)
+
+
+/*PCIe Switch Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 PhysicalPort; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumPorts; /*0x0C */
+ U8 PortNum; /*0x0D */
+ U16 AttachedDevHandle; /*0x0E */
+ U16 SwitchDevHandle; /*0x10 */
+ U8 NegotiatedPortWidth; /*0x12 */
+ U8 NegotiatedLinkRate; /*0x13 */
+ U32 Reserved4; /*0x14 */
+ U32 Reserved5; /*0x18 */
+} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
+ Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
+
+#define MPI26_PCIESWITCH1_PAGEVERSION (0x00)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/****************************************************************************
+* PCIe Device Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Device Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 Slot; /*0x08 */
+ U16 EnclosureHandle; /*0x0A */
+ U64 WWID; /*0x0C */
+ U16 ParentDevHandle; /*0x14 */
+ U8 PortNum; /*0x16 */
+ U8 AccessStatus; /*0x17 */
+ U16 DevHandle; /*0x18 */
+ U8 PhysicalPort; /*0x1A */
+ U8 Reserved1; /*0x1B */
+ U32 DeviceInfo; /*0x1C */
+ U32 Flags; /*0x20 */
+ U8 SupportedLinkRates; /*0x24 */
+ U8 MaxPortWidth; /*0x25 */
+ U8 NegotiatedPortWidth; /*0x26 */
+ U8 NegotiatedLinkRate; /*0x27 */
+ U8 EnclosureLevel; /*0x28 */
+ U8 Reserved2; /*0x29 */
+ U16 Reserved3; /*0x2A */
+ U8 ConnectorName[4]; /*0x2C */
+ U32 Reserved4; /*0x30 */
+ U32 Reserved5; /*0x34 */
+} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
+ Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
+
+#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01)
+
+/*values for PCIe Device Page 0 AccessStatus field */
+#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00)
+#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04)
+#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02)
+#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07)
+#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08)
+#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09)
+#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A)
+#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10)
+
+#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38)
+
+#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F)
+
+/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
+ *field
+ */
+
+/*values for PCIe Device Page 0 Flags field */
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
+
+/* values for PCIe Device Page 0 SupportedLinkRates field */
+#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
+#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04)
+#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02)
+#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*PCIe Device Page 2 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U16 DevHandle; /*0x08 */
+ U16 Reserved1; /*0x0A */
+ U32 MaximumDataTransferSize;/*0x0C */
+ U32 Capabilities; /*0x10 */
+ U32 Reserved2; /*0x14 */
+} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
+ Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
+
+#define MPI26_PCIEDEVICE2_PAGEVERSION (0x00)
+
+/*defines for PCIe Device Page 2 Capabilities field */
+#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004)
+#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002)
+#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001)
+
+
+/****************************************************************************
+* PCIe Link Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Link Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 CorrectableErrorCount; /*0x0C */
+ U16 NonFatalErrorCount; /*0x10 */
+ U16 Reserved3; /*0x12 */
+ U16 FatalErrorCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
+ Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
+
+#define MPI26_PCIELINK1_PAGEVERSION (0x00)
+
+/*PCIe Link Page 2 */
+
+typedef struct _MPI26_PCIELINK2_LINK_EVENT {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 LinkEventInfo; /*0x04 */
+} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
+ Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
+
+/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
+#define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK2_LINK_EVENT
+ LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
+ Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
+
+#define MPI26_PCIELINK2_PAGEVERSION (0x00)
+
+/*PCIe Link Page 3 */
+
+typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
+ U8 LinkEventCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U8 CounterType; /*0x04 */
+ U8 ThresholdWindow; /*0x05 */
+ U8 TimeUnits; /*0x06 */
+ U8 Reserved3; /*0x07 */
+ U32 EventThreshold; /*0x08 */
+ U16 ThresholdFlags; /*0x0C */
+ U16 Reserved4; /*0x0E */
+} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
+ Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
+
+/*values for LinkEventCode field */
+#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00)
+#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01)
+#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02)
+#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03)
+#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04)
+#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05)
+#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06)
+#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07)
+#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08)
+#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F)
+#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10)
+#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11)
+#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12)
+
+/*values for the CounterType field */
+#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/*values for the TimeUnits field */
+#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00)
+#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01)
+#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02)
+#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
+#define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
+ U8 Link; /*0x08 */
+ U8 Reserved1; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U8 NumLinkEvents; /*0x0C */
+ U8 Reserved3; /*0x0D */
+ U16 Reserved4; /*0x0E */
+ MPI26_PCIELINK3_LINK_EVENT_CONFIG
+ LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
+ Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
+
+#define MPI26_PCIELINK3_PAGEVERSION (0x00)
+
+
#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index bba56b6..7597c24 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -6,7 +6,7 @@
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.20
+ * mpi2_init.h Version: 02.00.21
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -54,6 +54,8 @@
* 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
* 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
* 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
+ * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
+ * be unique within first 32 characters.
* --------------------------------------------------------------------------
*/
@@ -373,6 +375,11 @@ typedef struct _MPI2_SCSI_IO_REPLY {
} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
+/*SCSI IO Reply MsgFlags bits */
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04)
+
/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
#define MPI2_SCSI_STATUS_GOOD (0x00)
@@ -446,11 +453,13 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
/*MsgFlags bits */
#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
/*SCSI Task Management Reply Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index af4be40..74d6827 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.27
+ * mpi2_ioc.h Version: 02.00.32
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -140,7 +140,32 @@
* Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
- * 08-25-15 02.00.27 Added IC ARCH Class based signature defines
+ * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
+ * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
+ * Added ConigurationFlags field to IOCInit message to
+ * support NVMe SGL format control.
+ * Added PCIe SRIOV support.
+ * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
+ * Added PCIe 4 16.0 GT/sec speec support.
+ * Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.29 Added Archclass for 4008 product.
+ * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
+ * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
+ * Request Message.
+ * Added new defines for the ImageType field of FWUpload
+ * Request Message.
+ * Added new values for the RegionType field in the Layout
+ * Data sections of the FLASH Layout Extended Image Data.
+ * Added new defines for the ReasonCode field of
+ * Active Cable Exception Event.
+ * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
+ * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
+ * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
+ * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
+ * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
+ * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
+ * defines for the ReasonCode field.
* --------------------------------------------------------------------------
*/
@@ -212,6 +237,9 @@ typedef struct _MPI2_IOC_INIT_REQUEST {
#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
+/*ConfigurationFlags */
+#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
+
/*minimum depth for a Reply Descriptor Post Queue */
#define MPI2_RDPQ_DEPTH_MIN (16)
@@ -299,6 +327,10 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
U16 MinDevHandle; /*0x3C */
U8 CurrentHostPageSize; /* 0x3E */
U8 Reserved4; /* 0x3F */
+ U8 SGEModifierMask; /*0x40 */
+ U8 SGEModifierValue; /*0x41 */
+ U8 SGEModifierShift; /*0x42 */
+ U8 Reserved5; /*0x43 */
} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
@@ -315,6 +347,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
@@ -335,6 +368,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
/*ProductID field uses MPI2_FW_HEADER_PID_ */
/*IOCCapabilities */
+#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
@@ -353,6 +387,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
@@ -402,6 +437,8 @@ typedef struct _MPI2_PORT_FACTS_REPLY {
#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
+#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40)
+
/****************************************************************************
* PortEnable message
@@ -508,6 +545,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
+#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D)
#define MPI2_EVENT_IR_VOLUME (0x001E)
#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
@@ -520,7 +558,12 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
#define MPI2_EVENT_HOST_MESSAGE (0x0028)
#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
+#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030)
+#define MPI2_EVENT_PCIE_ENUMERATION (0x0031)
+#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032)
+#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033)
#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
+#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035)
#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
@@ -617,11 +660,20 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
U8 ReasonCode; /* 0x04 */
U8 ReceptacleID; /* 0x05 */
U16 Reserved1; /* 0x06 */
-} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ Mpi25EventDataActiveCableExcept_t,
+ *pMpi25EventDataActiveCableExcept_t,
+ MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
*PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
Mpi26EventDataActiveCableExcept_t,
*pMpi26EventDataActiveCableExcept_t;
+/*MPI2.5 defines for the ReasonCode field */
+#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
+
/* defines for ReasonCode field */
#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
@@ -957,6 +1009,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
+#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
/*values for the PhyStatus field */
#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
@@ -982,12 +1035,37 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
*PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
Mpi2EventDataSasEnclDevStatusChange_t,
- *pMpi2EventDataSasEnclDevStatusChange_t;
+ *pMpi2EventDataSasEnclDevStatusChange_t,
+ MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+ Mpi26EventDataEnclDevStatusChange_t,
+ *pMpi26EventDataEnclDevStatusChange_t;
/*SAS Enclosure Device Status Change event ReasonCode values */
#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
+/*Enclosure Device Status Change event ReasonCode values */
+#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
+#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
+
+
+typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
+ U16 DevHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U32 Reserved1[2]; /*0x04 */
+ U64 SASAddress; /*0x0C */
+ U32 Reserved2[2]; /*0x14 */
+} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+ Mpi25EventDataSasDeviceDiscoveryError_t,
+ *pMpi25EventDataSasDeviceDiscoveryError_t;
+
+/*SAS Device Discovery Error Event data ReasonCode values */
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
+
/*SAS PHY Counter Event data */
typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
@@ -1073,6 +1151,174 @@ typedef struct _MPI2_EVENT_DATA_HBD_PHY {
/*values for the DescriptorType field */
#define MPI2_EVENT_HBD_DT_SAS (0x01)
+
+/*PCIe Device Status Change Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
+ U16 TaskTag; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U8 ASC; /*0x04 */
+ U8 ASCQ; /*0x05 */
+ U16 DevHandle; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ U64 WWID; /*0x0C */
+ U8 LUN[8]; /*0x14 */
+} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+ Mpi26EventDataPCIeDeviceStatusChange_t,
+ *pMpi26EventDataPCIeDeviceStatusChange_t;
+
+/*PCIe Device Status Change Event data ReasonCode values */
+#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
+#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
+
+
+/*PCIe Enumeration Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
+ U8 Flags; /*0x00 */
+ U8 ReasonCode; /*0x01 */
+ U8 PhysicalPort; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 EnumerationStatus; /*0x04 */
+} MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
+ Mpi26EventDataPCIeEnumeration_t,
+ *pMpi26EventDataPCIeEnumeration_t;
+
+/*PCIe Enumeration Event data Flags values */
+#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
+#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
+
+/*PCIe Enumeration Event data ReasonCode values */
+#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
+#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
+
+/*PCIe Enumeration Event data EnumerationStatus values */
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
+
+
+/*PCIe Topology Change List Event data (MPI v2.6 and later) */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
+#endif
+
+typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
+ U16 AttachedDevHandle; /*0x00 */
+ U8 PortStatus; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U8 CurrentPortInfo; /*0x04 */
+ U8 Reserved2; /*0x05 */
+ U8 PreviousPortInfo; /*0x06 */
+ U8 Reserved3; /*0x07 */
+} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+ Mpi26EventPCIeTopoPortEntry_t,
+ *pMpi26EventPCIeTopoPortEntry_t;
+
+/*PCIe Topology Change List Event data PortStatus values */
+#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
+
+/*PCIe Topology Change List Event data defines for CurrentPortInfo and
+ *PreviousPortInfo
+ */
+#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
+#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
+#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
+#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
+#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
+
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
+
+typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
+ U16 EnclosureHandle; /*0x00 */
+ U16 SwitchDevHandle; /*0x02 */
+ U8 NumPorts; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U8 NumEntries; /*0x08 */
+ U8 StartPortNum; /*0x09 */
+ U8 SwitchStatus; /*0x0A */
+ U8 PhysicalPort; /*0x0B */
+ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
+ PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
+} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+ Mpi26EventDataPCIeTopologyChangeList_t,
+ *pMpi26EventDataPCIeTopologyChangeList_t;
+
+/*PCIe Topology Change List Event data SwitchStatus values */
+#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
+#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
+#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
+#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
+#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
+
+/*PCIe Link Counter Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 LinkEventCode; /*0x0C */
+ U8 LinkNum; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 LinkEventInfo; /*0x10 */
+ U8 CounterType; /*0x14 */
+ U8 ThresholdWindow; /*0x15 */
+ U8 TimeUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 EventThreshold; /*0x18 */
+ U16 ThresholdFlags; /*0x1C */
+ U16 Reserved4; /*0x1E */
+} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+ Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
+
+
+/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
+ *field
+ */
+
+/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
+ *field
+ */
+
/****************************************************************************
* EventAck message
****************************************************************************/
@@ -1190,6 +1436,14 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
+#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
/*MPI v2.0 FWDownload TransactionContext Element */
@@ -1276,6 +1530,14 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST {
#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
+#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
+#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
+#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
+#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
+#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
+#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
+#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
+
/*MPI v2.0 FWUpload TransactionContext Element */
typedef struct _MPI2_FW_UPLOAD_TCSGE {
@@ -1394,10 +1656,13 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
/* legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
#define MPI26_FW_HEADER_SIGNATURE0 \
(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
#define MPI26_FW_HEADER_SIGNATURE0_3516 \
(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
+#define MPI26_FW_HEADER_SIGNATURE0_4008 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
/*Signature1 field */
#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
@@ -1541,6 +1806,13 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
+#define MPI2_FLASH_REGION_SBR (0x0E)
+#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
+#define MPI2_FLASH_REGION_HIIM (0x10)
+#define MPI2_FLASH_REGION_HIIA (0x11)
+#define MPI2_FLASH_REGION_CTLR (0x12)
+#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
+#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
/*ImageRevision */
#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
@@ -1825,6 +2097,8 @@ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
+#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
+#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
new file mode 100644
index 0000000..a42f4a3
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2012-2015 Avago Technologies. All rights reserved.
+ *
+ *
+ * Name: mpi2_pci.h
+ * Title: MPI PCIe Attached Devices structures and definitions.
+ * Creation Date: October 9, 2012
+ *
+ * mpi2_pci.h Version: 02.00.02
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 03-16-15 02.00.00 Initial version.
+ * 02-17-16 02.00.01 Removed AHCI support.
+ * Removed SOP support.
+ * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
+ * NVME Encapsulated Request.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_PCI_H
+#define MPI2_PCI_H
+
+
+/*
+ *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
+ *data and PCIe Configuration pages.
+ */
+#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010)
+
+#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F)
+#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000)
+#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001)
+#define MPI26_PCIE_DEVINFO_NVME (0x00000003)
+
+
+/****************************************************************************
+* NVMe Encapsulated message
+****************************************************************************/
+
+/*NVME Encapsulated Request Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
+ U16 DevHandle; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+ U64 ErrorResponseBaseAddress; /*0x10 */
+ U16 ErrorResponseAllocationLength; /*0x18 */
+ U16 Flags; /*0x1A */
+ U32 DataLength; /*0x1C */
+ U8 NVMe_Command[4]; /*0x20 */
+
+} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
+ Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
+
+/*defines for the Flags field */
+#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020)
+/*Submission Queue Type*/
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
+/*Error Response Address Space */
+#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
+#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
+#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
+#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
+/*Data Direction*/
+#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
+#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
+#define MPI26_NVME_FLAGS_WRITE (0x0001)
+#define MPI26_NVME_FLAGS_READ (0x0002)
+#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003)
+
+
+/*NVMe Encapuslated Reply Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
+ U16 DevHandle; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 EncapsulatedCommandLength; /*0x04 */
+ U8 Reserved1; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 ErrorResponseCount; /*0x14 */
+ U16 Reserved4; /*0x16 */
+} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+ Mpi26NVMeEncapsulatedErrorReply_t,
+ *pMpi26NVMeEncapsulatedErrorReply_t;
+
+
+#endif
+
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 5f9289a..4286c91 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.13
+ * mpi2_tool.h Version: 02.00.14
*
* Version History
* ---------------
@@ -35,6 +35,8 @@
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
* 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
* 11-18-14 02.00.13 Updated copyright information.
+ * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
+ * Tool Request Message.
* --------------------------------------------------------------------------
*/
@@ -105,6 +107,16 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
+#define MPI2_TOOLBOX_CLEAN_SBR (0x00800000)
+#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP (0x00400000)
+#define MPI2_TOOLBOX_CLEAN_HIIM (0x00200000)
+#define MPI2_TOOLBOX_CLEAN_HIIA (0x00100000)
+#define MPI2_TOOLBOX_CLEAN_CTLR (0x00080000)
+#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE (0x00040000)
+#define MPI2_TOOLBOX_CLEAN_MR_NVDATA (0x00020000)
+#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16 (0x0001FFE0)
+#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB (0x00000010)
+#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH (0x00000008)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
--
2.5.5
Powered by blists - more mailing lists