| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1504102118-7152-6-git-send-email-suganath-prabu.subramani@broadcom.com>
Date: Wed, 30 Aug 2017 19:38:29 +0530
From: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>
To: linux-scsi@...r.kernel.org
Cc: Sathya.Prakash@...adcom.com, linux-kernel@...r.kernel.org,
sreekanth.reddy@...adcom.com, linux-nvme@...ts.infradead.org,
Suganath Prabu S <suganath-prabu.subramani@...adcom.com>,
Chaitra P B <chaitra.basappa@...adcom.com>
Subject: [v5 05/14] mpt3sas: API 's to support NVMe drive addition to SML
Below Functions are added in various paths to support NVMe
drive addition.
_scsih_pcie_add_device
_scsih_pcie_device_add
_scsih_pcie_device_init_add
_scsih_check_pcie_access_status
_scsih_pcie_check_device
mpt3sas_get_pdev_by_handle
mpt3sas_config_get_pcie_device_pg0
mpt3sas_config_get_pcie_device_pg2
Signed-off-by: Chaitra P B <chaitra.basappa@...adcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>
Reviewed-by: Hannes Reinecke <hare@...e.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.h | 10 +
drivers/scsi/mpt3sas/mpt3sas_config.c | 100 +++++++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 473 +++++++++++++++++++++++++++++++++-
3 files changed, 575 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index c4be9ad..09ad823 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1458,6 +1458,10 @@ struct _sas_device *mpt3sas_get_sdev_by_addr(
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
struct _sas_device *__mpt3sas_get_sdev_by_addr(
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+ u16 handle);
+struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+ u16 handle);
void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
struct _raid_device *
@@ -1496,6 +1500,12 @@ int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+ u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+ u32 form, u32 handle);
int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
u16 sz);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index dd62701..1c747cf 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -150,6 +150,24 @@ _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
desc = "driver_mapping";
break;
+ case MPI2_CONFIG_EXTPAGETYPE_SAS_PORT:
+ desc = "sas_port";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING:
+ desc = "ext_manufacturing";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT:
+ desc = "pcie_io_unit";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH:
+ desc = "pcie_switch";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE:
+ desc = "pcie_device";
+ break;
+ case MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK:
+ desc = "pcie_link";
+ break;
}
break;
}
@@ -1053,6 +1071,88 @@ mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
}
/**
+ * mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+ u32 form, u32 handle)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+ mpi_request.Header.PageVersion = MPI26_PCIEDEVICE0_PAGEVERSION;
+ mpi_request.Header.PageNumber = 0;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.PageAddress = cpu_to_le32(form | handle);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+ u32 form, u32 handle)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+ mpi_request.Header.PageVersion = MPI26_PCIEDEVICE2_PAGEVERSION;
+ mpi_request.Header.PageNumber = 2;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.PageAddress = cpu_to_le32(form | handle);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+out:
+ return r;
+}
+
+/**
* mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
* @ioc: per adapter object
* @num_phys: pointer returned with the number of phys
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 3e6dd4b..2f257e1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -72,7 +72,7 @@ static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
struct _sas_device *sas_device);
static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
u8 retry_count, u8 is_pd);
-
+static int _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
/* global parameters */
@@ -409,11 +409,6 @@ _scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
*sas_address = 0;
- if (handle <= ioc->sas_hba.num_phys) {
- *sas_address = ioc->sas_hba.sas_address;
- return 0;
- }
-
if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
@@ -423,7 +418,16 @@ _scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
- *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ /*
+ * For HBA vSES don't return hba sas address instead return
+ * vSES's sas address.
+ */
+ if ((handle <= ioc->sas_hba.num_phys) &&
+ (!(le32_to_cpu(sas_device_pg0.DeviceInfo) &
+ MPI2_SAS_DEVICE_INFO_SEP)))
+ *sas_address = ioc->sas_hba.sas_address;
+ else
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
return 0;
}
@@ -684,7 +688,7 @@ found_device:
* This searches for sas_device based on sas_address, then return sas_device
* object.
*/
-static struct _sas_device *
+struct _sas_device *
mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _sas_device *sas_device;
@@ -995,6 +999,55 @@ mpt3sas_get_pdev_by_idchannel(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
return pcie_device;
}
+
+
+struct _pcie_device *
+__mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _pcie_device *pcie_device;
+
+ assert_spin_locked(&ioc->pcie_device_lock);
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+ if (pcie_device->handle == handle)
+ goto found_device;
+
+ list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+ if (pcie_device->handle == handle)
+ goto found_device;
+
+ return NULL;
+
+found_device:
+ pcie_device_get(pcie_device);
+ return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_handle - pcie device search
+ * @ioc: per adapter object
+ * @handle: Firmware device handle
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on handle, then return pcie_device
+ * object.
+ */
+struct _pcie_device *
+mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _pcie_device *pcie_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ return pcie_device;
+}
+
/**
* _scsih_pcie_device_remove - remove pcie_device from list.
* @ioc: per adapter object
@@ -1040,6 +1093,85 @@ _scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
}
}
/**
+ * _scsih_pcie_device_add - add pcie_device object
+ * @ioc: per adapter object
+ * @pcie_device: pcie_device object
+ *
+ * This is added to the pcie_device_list link list.
+ */
+static void
+_scsih_pcie_device_add(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__, pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device_get(pcie_device);
+ list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ if (scsi_add_device(ioc->shost, PCIE_CHANNEL, pcie_device->id, 0)) {
+ _scsih_pcie_device_remove(ioc, pcie_device);
+ } else if (!pcie_device->starget) {
+ if (!ioc->is_driver_loading) {
+/*TODO-- Need to find out whether this condition will occur or not*/
+ clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+ }
+ } else
+ clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+}
+
+/*
+ * _scsih_pcie_device_init_add - insert pcie_device to the init list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->pcie_device_init_list.
+ */
+static void
+_scsih_pcie_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: handle (0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ pcie_device->handle, (unsigned long long)pcie_device->wwid));
+ if (pcie_device->enclosure_handle != 0)
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+ ioc->name, __func__,
+ (unsigned long long)pcie_device->enclosure_logical_id,
+ pcie_device->slot));
+ if (pcie_device->connector_name[0] != '\0')
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "%s: enclosure level(0x%04x), connector name( %s)\n",
+ ioc->name, __func__, pcie_device->enclosure_level,
+ pcie_device->connector_name));
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device_get(pcie_device);
+ list_add_tail(&pcie_device->list, &ioc->pcie_device_init_list);
+ _scsih_determine_boot_device(ioc, pcie_device, PCIE_CHANNEL);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+/**
* _scsih_raid_device_find_by_id - raid device search
* @ioc: per adapter object
* @id: sas device target id
@@ -1250,6 +1382,23 @@ _scsih_is_end_device(u32 device_info)
}
/**
+ * _scsih_is_nvme_device - determines if device is an nvme device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if nvme device.
+ */
+static int
+_scsih_is_nvme_device(u32 device_info)
+{
+ if ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+ == MPI26_PCIE_DEVINFO_NVME)
+ return 1;
+ else
+ return 0;
+}
+
+/**
* _scsih_scsi_lookup_get - returns scmd entry
* @ioc: per adapter object
* @smid: system request message index
@@ -6299,6 +6448,314 @@ out:
}
/**
+ * _scsih_check_pcie_access_status - check access flags
+ * @ioc: per adapter object
+ * @wwid: wwid
+ * @handle: sas device handle
+ * @access_flags: errors returned during discovery of the device
+ *
+ * Return 0 for success, else failure
+ */
+static u8
+_scsih_check_pcie_access_status(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+ u16 handle, u8 access_status)
+{
+ u8 rc = 1;
+ char *desc = NULL;
+
+ switch (access_status) {
+ case MPI26_PCIEDEV0_ASTATUS_NO_ERRORS:
+ case MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION:
+ rc = 0;
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED:
+ desc = "PCIe device capability failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED:
+ desc = "PCIe device blocked";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED:
+ desc = "PCIe device mem space access failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE:
+ desc = "PCIe device unsupported";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED:
+ desc = "PCIe device MSIx Required";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX:
+ desc = "PCIe device init fail max";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_UNKNOWN:
+ desc = "PCIe device status unknown";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT:
+ desc = "nvme ready timeout";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED:
+ desc = "nvme device configuration unsupported";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED:
+ desc = "nvme identify failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED:
+ desc = "nvme qconfig failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED:
+ desc = "nvme qcreation failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED:
+ desc = "nvme eventcfg failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED:
+ desc = "nvme get feature stat failed";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT:
+ desc = "nvme idle timeout";
+ break;
+ case MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS:
+ desc = "nvme failure status";
+ break;
+ default:
+ pr_err(MPT3SAS_FMT
+ " NVMe discovery error(0x%02x): wwid(0x%016llx),"
+ "handle(0x%04x)\n", ioc->name, access_status,
+ (unsigned long long)wwid, handle);
+ return rc;
+ }
+
+ if (!rc)
+ return rc;
+
+ pr_info(MPT3SAS_FMT
+ "NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
+ ioc->name, desc,
+ (unsigned long long)wwid, handle);
+ return rc;
+}
+/**
+ * _scsih_pcie_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @handle: attached device handle
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
+ u32 ioc_status;
+ struct _pcie_device *pcie_device;
+ u64 wwid;
+ unsigned long flags;
+ struct scsi_target *starget;
+ struct MPT3SAS_TARGET *sas_target_priv_data;
+ u32 device_info;
+
+ if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle)))
+ return;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ return;
+
+ /* check if this is end device */
+ device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+ if (!(_scsih_is_nvme_device(device_info)))
+ return;
+
+ wwid = le64_to_cpu(pcie_device_pg0.WWID);
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+ if (!pcie_device) {
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ return;
+ }
+
+ if (unlikely(pcie_device->handle != handle)) {
+ starget = pcie_device->starget;
+ sas_target_priv_data = starget->hostdata;
+ starget_printk(KERN_INFO, starget,
+ "handle changed from(0x%04x) to (0x%04x)!!!\n",
+ pcie_device->handle, handle);
+ sas_target_priv_data->handle = handle;
+ pcie_device->handle = handle;
+
+ if (le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+ pcie_device->enclosure_level =
+ pcie_device_pg0.EnclosureLevel;
+ memcpy(&pcie_device->connector_name[0],
+ &pcie_device_pg0.ConnectorName[0], 4);
+ } else {
+ pcie_device->enclosure_level = 0;
+ pcie_device->connector_name[0] = '\0';
+ }
+ }
+
+ /* check if device is present */
+ if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+ pr_info(MPT3SAS_FMT
+ "device is not present handle(0x%04x), flags!!!\n",
+ ioc->name, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+ return;
+ }
+
+ /* check if there were any issues with discovery */
+ if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+ pcie_device_pg0.AccessStatus)) {
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+ return;
+ }
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+ pcie_device_put(pcie_device);
+
+ _scsih_ublock_io_device(ioc, wwid);
+
+ return;
+}
+
+/**
+ * _scsih_pcie_add_device - creating pcie device object
+ * @ioc: per adapter object
+ * @handle: pcie device handle
+ *
+ * Creating end device object, stored in ioc->pcie_device_list.
+ *
+ * Return 1 means queue the event later, 0 means complete the event
+ */
+static int
+_scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi26PCIeDevicePage0_t pcie_device_pg0;
+ Mpi26PCIeDevicePage2_t pcie_device_pg2;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ struct _pcie_device *pcie_device;
+ u32 pcie_device_type;
+ u32 ioc_status;
+ u64 wwid;
+
+ if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+ &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT
+ "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+
+ set_bit(handle, ioc->pend_os_device_add);
+ wwid = le64_to_cpu(pcie_device_pg0.WWID);
+
+ /* check if device is present */
+ if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+ pr_err(MPT3SAS_FMT
+ "device is not present handle(0x04%x)!!!\n",
+ ioc->name, handle);
+ return 0;
+ }
+
+ /* check if there were any issues with discovery */
+ if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+ pcie_device_pg0.AccessStatus))
+ return 0;
+
+ if (!(_scsih_is_nvme_device(le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+ return 0;
+
+ pcie_device = mpt3sas_get_pdev_by_wwid(ioc, wwid);
+ if (pcie_device) {
+ clear_bit(handle, ioc->pend_os_device_add);
+ pcie_device_put(pcie_device);
+ return 0;
+ }
+
+ pcie_device = kzalloc(sizeof(struct _pcie_device), GFP_KERNEL);
+ if (!pcie_device) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+
+ kref_init(&pcie_device->refcount);
+ pcie_device->id = ioc->pcie_target_id++;
+ pcie_device->channel = PCIE_CHANNEL;
+ pcie_device->handle = handle;
+ pcie_device->device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+ pcie_device->wwid = wwid;
+ pcie_device->port_num = pcie_device_pg0.PortNum;
+ pcie_device->fast_path = (le32_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+ pcie_device_type = pcie_device->device_info &
+ MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE;
+
+ pcie_device->enclosure_handle =
+ le16_to_cpu(pcie_device_pg0.EnclosureHandle);
+ if (pcie_device->enclosure_handle != 0)
+ pcie_device->slot = le16_to_cpu(pcie_device_pg0.Slot);
+
+ if (le16_to_cpu(pcie_device_pg0.Flags) &
+ MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+ pcie_device->enclosure_level = pcie_device_pg0.EnclosureLevel;
+ memcpy(&pcie_device->connector_name[0],
+ &pcie_device_pg0.ConnectorName[0], 4);
+ } else {
+ pcie_device->enclosure_level = 0;
+ pcie_device->connector_name[0] = '\0';
+ }
+
+ /* get enclosure_logical_id */
+ if (pcie_device->enclosure_handle &&
+ !(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ pcie_device->enclosure_handle)))
+ pcie_device->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+
+ /*TODO -- Add device name once FW supports it*/
+ if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
+ &pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(pcie_device);
+ return 0;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(pcie_device);
+ return 0;
+ }
+ pcie_device->nvme_mdts =
+ le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+
+ if (ioc->wait_for_discovery_to_complete)
+ _scsih_pcie_device_init_add(ioc, pcie_device);
+ else
+ _scsih_pcie_device_add(ioc, pcie_device);
+
+ pcie_device_put(pcie_device);
+ return 0;
+}
+/**
* _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
* event
* @ioc: per adapter object
--
2.5.5
Powered by blists - more mailing lists