[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1504062070-13523-6-git-send-email-embed3d@gmail.com>
Date: Wed, 30 Aug 2017 05:01:08 +0200
From: Philipp Rossak <embed3d@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
maxime.ripard@...e-electrons.com, wens@...e.org
Cc: Philipp Rossak <embed3d@...il.com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 5/7] ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1
From: Philipp Rossak <embed3d@...il.com>
The dwmac-sun8i hardware is present on the Nanopi M1.
It uses the internal PHY.
Signed-off-by: Philipp Rossak <embed3d@...il.com>
---
arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index 3a2ccdb..c77fbca 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -45,6 +45,10 @@
/ {
model = "FriendlyArm NanoPi M1";
compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+ aliases {
+ ethernet0 = &emac;
+ };
};
&ehci1 {
@@ -55,6 +59,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
--
2.7.4
Powered by blists - more mailing lists