lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Wed, 30 Aug 2017 15:18:24 -0700 (PDT)
From:   David Miller <davem@...emloft.net>
To:     antoine.tenart@...e-electrons.com
Cc:     kishon@...com, andrew@...n.ch, jason@...edaemon.net,
        sebastian.hesselbarth@...il.com,
        gregory.clement@...e-electrons.com,
        thomas.petazzoni@...e-electrons.com, nadavh@...vell.com,
        linux@...linux.org.uk, linux-kernel@...r.kernel.org,
        mw@...ihalf.com, stefanc@...vell.com,
        miquel.raynal@...e-electrons.com, netdev@...r.kernel.org
Subject: Re: [PATCH net-next v4 00/13] net: mvpp2: comphy configuration

From: Antoine Tenart <antoine.tenart@...e-electrons.com>
Date: Wed, 30 Aug 2017 10:29:11 +0200

> This series, following up the one one the GoP/MAC configuration, aims at
> stopping to depend on the firmware/bootloader configuration when using
> the PPv2 engine. With this series the PPv2 driver does not need to rely
> on a previous configuration, and dynamic reconfiguration while the
> kernel is running can be done (i.e. switch one port from SGMII to 10G,
> or the opposite). A port can now be configured in a different mode than
> what's done in the firmware/bootloader as well.
> 
> The series first contain patches in the generic PHY framework to support
> what is called the comphy (common PHYs), which is an h/w block providing
> PHYs that can be configured in various modes ranging from SGMII, 10G
> to SATA and others. As of now only the SGMII and 10G modes are
> supported by the comphy driver.
> 
> Then patches are modifying the PPv2 driver to first add the comphy
> initialization sequence (i.e. calls to the generic PHY framework) and to
> then take advantage of this to allow dynamic reconfiguration (i.e.
> configuring the mode of a port given what's connected, between sgmii and
> 10G). Note the use of the comphy in the PPv2 driver is kept optional
> (i.e. if not described in dt the driver still as before an relies on the
> firmware/bootloader configuration).
> 
> Finally there are dt/defconfig patches to describe and take advantage of
> this.
> 
> This was tested on a range of devices: 8040-db, 8040-mcbin and 7040-db.
> 
> @Dave: the dt patches should go through the mvebu tree (patches 9-13).

Ok, patches 1-8 applied to net-next, thanks!

Powered by blists - more mailing lists