[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1504162792.git.hns@goldelico.com>
Date: Thu, 31 Aug 2017 08:59:49 +0200
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: afd@...com, Pali Rohár <pali.rohar@...il.com>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
gta04-owner@...delico.com, marek@...delico.com,
linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
"H. Nikolaus Schaller" <hns@...delico.com>
Subject: [PATCH v3 0/4] fixes for latest bq27xxx driver and OpenPandora DT nodes
Latest bq27xxx drivers allow to write RAM/NVRAM parameters
of the fuel gauge chip from values defined in board specific
device tree.
This allows to specify the battery properties of a standard
battery.
This patch set enables this for two chips where I have tested
it on real devices:
bq27421: Pyra handheld prototype
bq27500: OpenPandora 600 Mhz standard device
Since the Pyra DT is not yet mainlined, there are only DT
patches for the OpenPandora.
H. Nikolaus Schaller (4):
power: supply: bq27xxx: enable writing capacity values for bq27421
power: supply: bq27xxx: enable writing capacity values for bq27500
DT: OpenPandora: add battery node to describe OpenPandora battery
DT: OpenPandora: fix for configuration of bq27500 fuel gauge
arch/arm/boot/dts/omap3-pandora-common.dtsi | 11 ++++++++++-
drivers/power/supply/bq27xxx_battery.c | 8 --------
2 files changed, 10 insertions(+), 9 deletions(-)
--
2.12.2
Powered by blists - more mailing lists