linux-kernel - Re: [PATCH 01/13] thermal/drivers/hisi: Fix missing interrupt enablement

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170901083133.GA26177@leoy-linaro>
Date:   Fri, 1 Sep 2017 16:31:33 +0800
From:   Leo Yan <leo.yan@...aro.org>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:     rui.zhang@...el.com, edubezval@...il.com, linux-pm@...r.kernel.org,
        kevin.wangtao@...aro.org, open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 01/13] thermal/drivers/hisi: Fix missing interrupt
 enablement

On Wed, Aug 30, 2017 at 10:47:25AM +0200, Daniel Lezcano wrote:
> The interrupt for the temperature threshold is not enabled at the end of the
> probe function, enable it after the setup is complete.
> 
> On the other side, the irq_enabled is not correctly set as we are checking if
> the interrupt is masked where 'yes' means irq_enabled=false.
> 
> 	irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
> 				&data->irq_enabled);
> 
> As we are always enabling the interrupt, it is pointless to check if
> the interrupt is masked or not, just set irq_enabled to 'true'.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>

Thanks for patch series, I will verify them one by one. I verified the
interrupt can work well with this patch:

Reviewed-by: Leo Yan <leo.yan@...aro.org>
Tested-by: Leo Yan <leo.yan@...aro.org>

> ---
>  drivers/thermal/hisi_thermal.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index bd3572c..8381696 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -345,8 +345,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
>  	}
>  
>  	hisi_thermal_enable_bind_irq_sensor(data);
> -	irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
> -			      &data->irq_enabled);
> +	data->irq_enabled = true;
>  
>  	for (i = 0; i < HISI_MAX_SENSORS; ++i) {
>  		ret = hisi_thermal_register_sensor(pdev, data,
> @@ -358,6 +357,8 @@ static int hisi_thermal_probe(struct platform_device *pdev)
>  			hisi_thermal_toggle_sensor(&data->sensors[i], true);
>  	}
>  
> +	enable_irq(data->irq);
> +
>  	return 0;
>  }
>  
> -- 
> 2.7.4
>