[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170901125959.6ae37ez34vb7mh6d@flea>
Date: Fri, 1 Sep 2017 14:59:59 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Philipp Rossak <embed3d@...il.com>
Cc: robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
wens@...e.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 7/7] ARM: dts: sun8i: h3: Enable AP6212 BT on uart3 on
Nanopi M1 Plus
On Wed, Aug 30, 2017 at 05:01:10AM +0200, Philipp Rossak wrote:
> From: Philipp Rossak <embed3d@...il.com>
>
> The BT side of the AP6212 WiFi/BT combo module is connected to
> uart3.
>
> Enable BT on this board by enabling uart3 with using additionally
> the cts and rts pins.
>
> Signed-off-by: Philipp Rossak <embed3d@...il.com>
I've queued this patch for 4.15, but...
> ---
> arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 3054308..8c12419 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -49,6 +49,7 @@
> aliases {
> ethernet0 = &emac;
> ethernet1 = &ap6212;
> + serial1 = &uart3;
You'll also need an alias for serial 0 here. Can you send a follow up
patch to do so?
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists