[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5310134e-c371-d43f-175f-a3a9cdc5b657@axis.com>
Date: Mon, 4 Sep 2017 17:23:55 +0200
From: Niklas Cassel <niklas.cassel@...s.com>
To: Surender Polsani <surenderp@...hveda.org>, <jespern@...s.com>,
<larper@...s.com>, <robh+dt@...nel.org>, <mark.rutland@....com>,
<linux@...linux.org.uk>
CC: <linux-arm-kernel@...s.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <sunil.m@...hveda.org>
Subject: Re: [PATCH] arm: boot: dts: artpec6: Remove unnecessary
interrupt-parent property from sub-nodes
On 08/11/2017 09:56 AM, Surender Polsani wrote:
> On Tuesday 27 June 2017 05:57 PM, Niklas Cassel wrote:
>> Acked-by: Niklas Cassel <niklas.cassel@...s.com>
>
> Hi Nik, This patch has been Acknowledged but is not getting added / applied to the
> respective git source tree. Please let me know if there is any problem.
Hello Surender,
Sorry for the delay.
Could you please resend your patch,
add "To: arm@...nel.org", together with my Ack.
Best regards,
Niklas
>
> Thanks
> Surender
>>
>> On 06/27/2017 02:15 PM, surenderp@...hveda.org wrote:
>>> From: Surender Polsani <surenderp@...hveda.org>
>>>
>>> "interrupt-parent" property is declared in root node, so it is global
>>> to all nodes. This property is re-declared in few sub-nodes. To avoid
>>> duplication this property is removed from following sub-nodes:
>>> pmu, amba@0, amba@...thernet.
>>>
>>> Signed-off-by: Surender Polsani <surenderp@...hveda.org>
>>> ---
>>> arch/arm/boot/dts/artpec6.dtsi | 3 ---
>>> 1 file changed, 3 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
>>> index 767cbe8..2ed1177 100644
>>> --- a/arch/arm/boot/dts/artpec6.dtsi
>>> +++ b/arch/arm/boot/dts/artpec6.dtsi
>>> @@ -151,7 +151,6 @@
>>> interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>>> <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>>> interrupt-affinity = <&cpu0>, <&cpu1>;
>>> - interrupt-parent = <&intc>;
>>> };
>>> pcie: pcie@...50000 {
>>> @@ -185,7 +184,6 @@
>>> compatible = "simple-bus";
>>> #address-cells = <0x1>;
>>> #size-cells = <0x1>;
>>> - interrupt-parent = <&intc>;
>>> ranges;
>>> dma-ranges = <0x80000000 0x00000000 0x40000000>;
>>> dma-coherent;
>>> @@ -195,7 +193,6 @@
>>> clocks = <ð_phy_ref_clk>,
>>> <&clkctrl ARTPEC6_CLK_ETH_ACLK>;
>>> compatible = "snps,dwc-qos-ethernet-4.10";
>>> - interrupt-parent = <&intc>;
>>> interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>>> reg = <0xf8010000 0x4000>;
>>>
>
Powered by blists - more mailing lists