lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 4 Sep 2017 10:16:29 +0900 From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com> To: robh+dt@...nel.org, mark.rutland@....com, yamada.masahiro@...ionext.com Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, masami.hiramatsu@...aro.org, jaswinder.singh@...aro.org, Kunihiko Hayashi <hayashi.kunihiko@...ionext.com> Subject: [PATCH v4 0/2] add thermal nodes for UniPhier SoCs This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs. Changes since v3: - rebase on top of linux-next Changes since v2: - add the calibration value to device tree for LD20 reference board Changes since v1: - separate from driver's patchset[1] - add cooling-maps nodes on the device tree - fix an interrupt trigger to set 'level-triggered' according to hardware specification - bring up threshold temperature for LD20 according to the spec sheet - add cpuN labels for reference in cooling-device property on PXs2 dts [1] https://lkml.org/lkml/2017/6/28/170 Kunihiko Hayashi (2): ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 arch/arm/boot/dts/uniphier-pxs2.dtsi | 43 ++++++++++++++++++++-- .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 ++ arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 40 ++++++++++++++++++++ 3 files changed, 83 insertions(+), 4 deletions(-) -- 2.7.4
Powered by blists - more mailing lists