[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7hlgltar8u.fsf@baylibre.com>
Date: Tue, 05 Sep 2017 12:18:41 -0700
From: Kevin Hilman <khilman@...libre.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Carlo Caione <carlo@...one.org>, linux-amlogic@...ts.infradead.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 0/9] ARM64: dts: meson: update around mmc
Jerome Brunet <jbrunet@...libre.com> writes:
> This patchset feature updates around mmc. It is linked to this series [0]
> but does not strictly depends on it. It adds:
>
> * The regulator settling times for the gpio regulator of nanopi-k2 and
> the libretech-cc.
> * UHS modes for the p20x, nanopi-k2 and the libretech-cc
> * clk-gate pins: these are the pinmuxes used for the clk-stop work
> around explained here [1]
>
> It also removes cap-sd-highspeed from eMMC nodes.
>
> Special note on SDR104:
> While the PCB of the p200 and the libretech-cc does not seems to handle
> SDR104 completely, the nanopi-k2 seems to be handling it correctly.
>
> The patch enabling this mode on the nanopi-k2 is the last one of this
> series. It should propabably be left out until more people can test
> sdr104 on the nanopi-k2
>
> This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the
> gxl-s905x-libretech-cc
>
> Changes since v2 [3]:
> * Rebase on Kevin's v4.14/dt64 branch
>
> Changes since v1 [2]:
> * Reorder patches to put fixes first, then enhancements
> * Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4)
>
> [0]: https://lkml.kernel.org/r/20170828142915.27020-1-jbrunet@baylibre.com
> [1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet@baylibre.com
> [2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet@baylibre.com
> [3]: https://lkml.kernel.org/r/20170821160637.22456-1-jbrunet@baylibre.com
>
> Jerome Brunet (9):
> ARM64: dts: meson-gx: Use correct mmc clock source 0
> ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
> ARM64: dts: meson: add mmc clk gate pins
> ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
> ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
> ARM64: dts: meson-gxl: libretech-cc: enable high speed modes
> ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
> ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
> ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
Applied to v4.14/dt64, and submitted to arm-soc. It may miss this merge
window, but if it does, we can submit for the first round of fixes after
-rc1 is out.
Thanks,
Kevin
Powered by blists - more mailing lists