[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1504666955-15635-1-git-send-email-dennisyang@qnap.com>
Date: Wed, 6 Sep 2017 11:02:35 +0800
From: Dennis Yang <dennisyang@...p.com>
To: shli@...nel.org
Cc: linux-raid@...r.kernel.org, linux-kernel@...r.kernel.org,
Dennis Yang <dennisyang@...p.com>
Subject: [PATCH v2] md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST
set, it indicates that this stripe_head is already in the raid5_plug_cb
list and release_stripe() would be called instead to drop a reference
count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this
stripe_head and it will get queued into the raid5_plug_cb list.
Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST,
A stripe could be re-added to plug list while it is still on that list
in the following situation. If stripe_head A is added to another
stripe_head B's batch list, in this case A will have its
batch_head != NULL and be added into the plug list. After that,
stripe_head B gets handled and called break_stripe_batch_list() to
reset all the batched stripe_head(including A which is still on
the plug list)'s state and reset their batch_head to NULL.
Before the plug list gets processed, if there is another write request
comes in and get stripe_head A, A will have its batch_head == NULL
(cleared by calling break_stripe_batch_list() on B) and be added to
plug list once again.
Signed-off-by: Dennis Yang <dennisyang@...p.com>
---
drivers/md/raid5.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e92dd2d..faf3cfd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4611,7 +4611,8 @@ static void break_stripe_batch_list(struct stripe_head *head_sh,
set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS |
(1 << STRIPE_PREREAD_ACTIVE) |
- (1 << STRIPE_DEGRADED)),
+ (1 << STRIPE_DEGRADED) |
+ (1 << STRIPE_ON_UNPLUG_LIST)),
head_sh->state & (1 << STRIPE_INSYNC));
sh->check_state = head_sh->check_state;
--
1.9.1
Powered by blists - more mailing lists