[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1504744255-25281-4-git-send-email-john.stultz@linaro.org>
Date: Wed, 6 Sep 2017 17:30:55 -0700
From: John Stultz <john.stultz@...aro.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <john.stultz@...aro.org>,
Wei Xu <xuwei5@...ilicon.com>,
Guodong Xu <guodong.xu@...aro.org>,
Amit Pundir <amit.pundir@...aro.org>,
YongQin Liu <yongqin.liu@...aro.org>,
John Youn <johnyoun@...opsys.com>,
Minas Harutyunyan <Minas.Harutyunyan@...opsys.com>,
Douglas Anderson <dianders@...omium.org>,
Chen Yu <chenyu56@...wei.com>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org
Subject: [RESEND][PATCH 3/3] usb: dwc2: Fix UDC state tracking
It has been noticed that the dwc2 udc state reporting doesn't
seem to work (at least on HiKey boards). Where after the initial
setup, the sysfs /sys/class/udc/f72c0000.usb/state file would
report "configured" no matter the state of the OTG port.
This patch adds a call so that we report to the UDC layer when
the gadget device is disconnected.
Cc: Wei Xu <xuwei5@...ilicon.com>
Cc: Guodong Xu <guodong.xu@...aro.org>
Cc: Amit Pundir <amit.pundir@...aro.org>
Cc: YongQin Liu <yongqin.liu@...aro.org>
Cc: John Youn <johnyoun@...opsys.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@...opsys.com>
Cc: Douglas Anderson <dianders@...omium.org>
Cc: Chen Yu <chenyu56@...wei.com>
Cc: Felipe Balbi <felipe.balbi@...ux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org
Reported-by: Amit Pundir <amit.pundir@...aro.org>
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
drivers/usb/dwc2/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7fd0e38..603c216 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3202,6 +3202,8 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
call_gadget(hsotg, disconnect);
hsotg->lx_state = DWC2_L3;
+
+ usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
}
/**
--
2.7.4
Powered by blists - more mailing lists