| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 7 Sep 2017 12:22:56 +0100
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Sebastian Reichel <sebastian.reichel@...labora.co.uk>,
Sebastian Reichel <sre@...nel.org>, Milo Kim <Milo.Kim@...com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Tony Lindgren <tony@...mide.com>
Cc: Jingoo Han <jingoohan1@...il.com>,
Mark Rutland <mark.rutland@....com>,
linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-omap@...r.kernel.org
Subject: Re: [PATCHv2 2/2] backlight: add TI LMU backlight driver
On 17/07/17 14:39, Sebastian Reichel wrote:
> From: Milo Kim <Milo.Kim@...com>
>
> This is consolidated driver which supports the following
> backlight devices: LM3532, LM3631, LM3632, LM3633, LM3695
> and LM3697.
>
> Structure
> ---------
> It consists of two parts - core and data.
>
> Core part supports features below.
> - Backlight subsystem control
> - Channel configuration from DT properties
> - Light dimming effect control: ramp up and down.
> - LMU fault monitor notifier handling
> - PWM brightness control
>
> Data part describes device specific data.
> - Register value configuration for each LMU device
> : initialization, channel configuration, control mode, enable and
> brightness.
> - PWM action configuration
> - Light dimming effect table
> - Option for LMU fault monitor support
>
> Signed-off-by: Milo Kim <milo.kim@...com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.co.uk>
Is there a v3 pending?
I just found this patch near the bottom of my TODO list but IIRC I
actually decided to defer final review of this driver until feedback on
the bindings was resolved (and as a result I've just taken it off the
TODO list).
Daniel.
> ---
> drivers/video/backlight/Kconfig | 7 +
> drivers/video/backlight/Makefile | 3 +
> drivers/video/backlight/ti-lmu-backlight-core.c | 729 ++++++++++++++++++++++++
> drivers/video/backlight/ti-lmu-backlight-data.c | 304 ++++++++++
> drivers/video/backlight/ti-lmu-backlight-data.h | 95 +++
> 5 files changed, 1138 insertions(+)
> create mode 100644 drivers/video/backlight/ti-lmu-backlight-core.c
> create mode 100644 drivers/video/backlight/ti-lmu-backlight-data.c
> create mode 100644 drivers/video/backlight/ti-lmu-backlight-data.h
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 4e1d2ad50ba1..c3cc8334f9a2 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -427,6 +427,13 @@ config BACKLIGHT_SKY81452
> To compile this driver as a module, choose M here: the module will
> be called sky81452-backlight
>
> +config BACKLIGHT_TI_LMU
> + tristate "Backlight driver for TI LMU"
> + depends on BACKLIGHT_CLASS_DEVICE && MFD_TI_LMU
> + help
> + Say Y to enable the backlight driver for TI LMU devices.
> + This supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
> +
> config BACKLIGHT_TPS65217
> tristate "TPS65217 Backlight"
> depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index 8905129691e8..c532e43e344b 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -52,6 +52,9 @@ obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o
> obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
> obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
> obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
> +ti-lmu-backlight-objs := ti-lmu-backlight-core.o \
> + ti-lmu-backlight-data.o
> +obj-$(CONFIG_BACKLIGHT_TI_LMU) += ti-lmu-backlight.o
> obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
> obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> diff --git a/drivers/video/backlight/ti-lmu-backlight-core.c b/drivers/video/backlight/ti-lmu-backlight-core.c
> new file mode 100644
> index 000000000000..fca95080ec27
> --- /dev/null
> +++ b/drivers/video/backlight/ti-lmu-backlight-core.c
> @@ -0,0 +1,729 @@
> +/*
> + * TI LMU (Lighting Management Unit) Backlight Driver
> + *
> + * Copyright 2015 Texas Instruments
> + *
> + * Author: Milo Kim <milo.kim@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/ti-lmu.h>
> +#include <linux/mfd/ti-lmu-register.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/slab.h>
> +
> +#include "ti-lmu-backlight-data.h"
> +
> +enum ti_lmu_bl_ctrl_mode {
> + BL_REGISTER_BASED,
> + BL_PWM_BASED,
> +};
> +
> +enum ti_lmu_bl_ramp_mode {
> + BL_RAMP_UP,
> + BL_RAMP_DOWN,
> +};
> +
> +struct ti_lmu_bl;
> +
> +/**
> + * struct ti_lmu_bl_chip
> + *
> + * @dev: Parent device pointer
> + * @lmu: LMU structure.
> + * Used for register R/W access and notification.
> + * @cfg: Device configuration data
> + * @lmu_bl: Multiple backlight channels
> + * @num_backlights: Number of backlight channels
> + * @nb: Notifier block for handling LMU fault monitor event
> + *
> + * One backlight chip can have multiple backlight channels, 'ti_lmu_bl'.
> + */
> +struct ti_lmu_bl_chip {
> + struct device *dev;
> + struct ti_lmu *lmu;
> + const struct ti_lmu_bl_cfg *cfg;
> + struct ti_lmu_bl *lmu_bl;
> + int num_backlights;
> + struct notifier_block nb;
> +};
> +
> +/**
> + * struct ti_lmu_bl
> + *
> + * @chip: Pointer to parent backlight device
> + * @bl_dev: Backlight subsystem device structure
> + * @bank_id: Backlight bank ID
> + * @name: Backlight channel name
> + * @mode: Backlight control mode
> + * @led_sources: Backlight output channel configuration.
> + * Bit mask is set on parsing DT.
> + * @default_brightness: [Optional] Initial brightness value
> + * @ramp_up_msec: [Optional] Ramp up time
> + * @ramp_down_msec: [Optional] Ramp down time
> + * @pwm_period: [Optional] PWM period
> + * @pwm: [Optional] PWM subsystem structure
> + *
> + * Each backlight device has its own channel configuration.
> + * For chip control, parent chip data structure is used.
> + */
> +struct ti_lmu_bl {
> + struct ti_lmu_bl_chip *chip;
> + struct backlight_device *bl_dev;
> +
> + int bank_id;
> + const char *name;
> + enum ti_lmu_bl_ctrl_mode mode;
> + unsigned long led_sources;
> +
> + unsigned int default_brightness;
> +
> + /* Used for lighting effect */
> + unsigned int ramp_up_msec;
> + unsigned int ramp_down_msec;
> +
> + /* Only valid in PWM mode */
> + unsigned int pwm_period;
> + struct pwm_device *pwm;
> +};
> +
> +#define NUM_DUAL_CHANNEL 2
> +#define LMU_BACKLIGHT_DUAL_CHANNEL_USED (BIT(0) | BIT(1))
> +#define LMU_BACKLIGHT_11BIT_LSB_MASK (BIT(0) | BIT(1) | BIT(2))
> +#define LMU_BACKLIGHT_11BIT_MSB_SHIFT 3
> +#define DEFAULT_PWM_NAME "lmu-backlight"
> +
> +static int ti_lmu_backlight_enable(struct ti_lmu_bl *lmu_bl, bool enable)
> +{
> + struct ti_lmu_bl_chip *chip = lmu_bl->chip;
> + struct regmap *regmap = chip->lmu->regmap;
> + unsigned long enable_time = chip->cfg->reginfo->enable_usec;
> + u8 *reg = chip->cfg->reginfo->enable;
> + u8 mask = BIT(lmu_bl->bank_id);
> + u8 val = (enable == true) ? mask : 0;
> + int ret;
> +
> + if (!reg)
> + return -EINVAL;
> +
> + ret = regmap_update_bits(regmap, *reg, mask, val);
> + if (ret)
> + return ret;
> +
> + if (enable_time > 0)
> + usleep_range(enable_time, enable_time + 100);
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_pwm_ctrl(struct ti_lmu_bl *lmu_bl, int brightness,
> + int max_brightness)
> +{
> + struct pwm_state state = { };
> + int ret;
> +
> + if (!lmu_bl->pwm) {
> + lmu_bl->pwm = devm_pwm_get(lmu_bl->chip->dev, DEFAULT_PWM_NAME);
> + if (IS_ERR(lmu_bl->pwm)) {
> + ret = PTR_ERR(lmu_bl->pwm);
> + lmu_bl->pwm = NULL;
> + dev_err(lmu_bl->chip->dev,
> + "Can not get PWM device, err: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + pwm_init_state(lmu_bl->pwm, &state);
> + state.period = lmu_bl->pwm_period;
> + state.duty_cycle = brightness * state.period / max_brightness;
> +
> + if (state.duty_cycle)
> + state.enabled = true;
> + else
> + state.enabled = false;
> +
> + ret = pwm_apply_state(lmu_bl->pwm, &state);
> + if (ret)
> + dev_err(lmu_bl->chip->dev, "Failed to configure PWM: %d", ret);
> +
> + return ret;
> +}
> +
> +static int ti_lmu_backlight_update_brightness_register(struct ti_lmu_bl *lmu_bl,
> + int brightness)
> +{
> + const struct ti_lmu_bl_cfg *cfg = lmu_bl->chip->cfg;
> + const struct ti_lmu_bl_reg *reginfo = cfg->reginfo;
> + struct regmap *regmap = lmu_bl->chip->lmu->regmap;
> + u8 reg, val;
> + int ret;
> +
> + /*
> + * Brightness register update
> + *
> + * 11 bit dimming: update LSB bits and write MSB byte.
> + * MSB brightness should be shifted.
> + * 8 bit dimming: write MSB byte.
> + */
> + if (cfg->max_brightness == MAX_BRIGHTNESS_11BIT) {
> + reg = reginfo->brightness_lsb[lmu_bl->bank_id];
> + ret = regmap_update_bits(regmap, reg,
> + LMU_BACKLIGHT_11BIT_LSB_MASK,
> + brightness);
> + if (ret)
> + return ret;
> +
> + val = brightness >> LMU_BACKLIGHT_11BIT_MSB_SHIFT;
> + } else {
> + val = brightness;
> + }
> +
> + reg = reginfo->brightness_msb[lmu_bl->bank_id];
> + return regmap_write(regmap, reg, val);
> +}
> +
> +static int ti_lmu_backlight_update_status(struct backlight_device *bl_dev)
> +{
> + struct ti_lmu_bl *lmu_bl = bl_get_data(bl_dev);
> + const struct ti_lmu_bl_cfg *cfg = lmu_bl->chip->cfg;
> + int brightness = bl_dev->props.brightness;
> + bool enable = brightness > 0;
> + int ret;
> +
> + if (bl_dev->props.state & BL_CORE_SUSPENDED)
> + brightness = 0;
> +
> + ret = ti_lmu_backlight_enable(lmu_bl, enable);
> + if (ret)
> + return ret;
> +
> + if (lmu_bl->mode == BL_PWM_BASED) {
> + ti_lmu_backlight_pwm_ctrl(lmu_bl, brightness,
> + bl_dev->props.max_brightness);
> +
> + switch (cfg->pwm_action) {
> + case UPDATE_PWM_ONLY:
> + /* No register update is required */
> + return 0;
> + case UPDATE_MAX_BRT:
> + /*
> + * PWM can start from any non-zero code and dim down
> + * to zero. So, brightness register should be updated
> + * even in PWM mode.
> + */
> + if (brightness > 0)
> + brightness = MAX_BRIGHTNESS_11BIT;
> + else
> + brightness = 0;
> + break;
> + default:
> + break;
> + }
> + }
> +
> + return ti_lmu_backlight_update_brightness_register(lmu_bl, brightness);
> +}
> +
> +static const struct backlight_ops lmu_backlight_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = ti_lmu_backlight_update_status,
> +};
> +
> +static int ti_lmu_backlight_of_get_ctrl_bank(struct device_node *np,
> + struct ti_lmu_bl *lmu_bl)
> +{
> + const char *name;
> + u32 *sources;
> + int num_channels = lmu_bl->chip->cfg->num_channels;
> + int ret, num_sources;
> +
> + sources = devm_kzalloc(lmu_bl->chip->dev, num_channels, GFP_KERNEL);
> + if (!sources)
> + return -ENOMEM;
> +
> + if (!of_property_read_string(np, "label", &name))
> + lmu_bl->name = name;
> + else
> + lmu_bl->name = np->name;
> +
> + ret = of_property_count_u32_elems(np, "led-sources");
> + if (ret < 0 || ret > num_channels)
> + return -EINVAL;
> +
> + num_sources = ret;
> + ret = of_property_read_u32_array(np, "led-sources", sources,
> + num_sources);
> + if (ret)
> + return ret;
> +
> + lmu_bl->led_sources = 0;
> + while (num_sources--)
> + set_bit(sources[num_sources], &lmu_bl->led_sources);
> +
> + return 0;
> +}
> +
> +static void ti_lmu_backlight_of_get_light_properties(struct device_node *np,
> + struct ti_lmu_bl *lmu_bl)
> +{
> + of_property_read_u32(np, "default-brightness-level",
> + &lmu_bl->default_brightness);
> +
> + of_property_read_u32(np, "ramp-up-msec", &lmu_bl->ramp_up_msec);
> + of_property_read_u32(np, "ramp-down-msec", &lmu_bl->ramp_down_msec);
> +}
> +
> +static void ti_lmu_backlight_of_get_brightness_mode(struct device_node *np,
> + struct ti_lmu_bl *lmu_bl)
> +{
> + of_property_read_u32(np, "pwm-period", &lmu_bl->pwm_period);
> +
> + if (lmu_bl->pwm_period > 0)
> + lmu_bl->mode = BL_PWM_BASED;
> + else
> + lmu_bl->mode = BL_REGISTER_BASED;
> +}
> +
> +static int ti_lmu_backlight_of_create(struct ti_lmu_bl_chip *chip,
> + struct device_node *np)
> +{
> + struct device_node *child;
> + struct ti_lmu_bl *lmu_bl, *each;
> + int ret, num_backlights;
> + int i = 0;
> +
> + num_backlights = of_get_child_count(np);
> + if (num_backlights == 0) {
> + dev_err(chip->dev, "No backlight strings\n");
> + return -ENODEV;
> + }
> +
> + /* One chip can have mulitple backlight strings */
> + lmu_bl = devm_kzalloc(chip->dev, sizeof(*lmu_bl) * num_backlights,
> + GFP_KERNEL);
> + if (!lmu_bl)
> + return -ENOMEM;
> +
> + /* Child is mapped to LMU backlight control bank */
> + for_each_child_of_node(np, child) {
> + each = lmu_bl + i;
> + each->bank_id = i;
> + each->chip = chip;
> +
> + ret = ti_lmu_backlight_of_get_ctrl_bank(child, each);
> + if (ret) {
> + of_node_put(np);
> + return ret;
> + }
> +
> + ti_lmu_backlight_of_get_light_properties(child, each);
> + ti_lmu_backlight_of_get_brightness_mode(child, each);
> +
> + i++;
> + }
> +
> + chip->lmu_bl = lmu_bl;
> + chip->num_backlights = num_backlights;
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_check_channel(struct ti_lmu_bl *lmu_bl)
> +{
> + const struct ti_lmu_bl_cfg *cfg = lmu_bl->chip->cfg;
> + const struct ti_lmu_bl_reg *reginfo = lmu_bl->chip->cfg->reginfo;
> +
> + if (!reginfo->brightness_msb)
> + return -EINVAL;
> +
> + if (cfg->max_brightness > MAX_BRIGHTNESS_8BIT) {
> + if (!reginfo->brightness_lsb)
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_create_channel(struct ti_lmu_bl *lmu_bl)
> +{
> + struct regmap *regmap = lmu_bl->chip->lmu->regmap;
> + const struct lmu_bl_reg_data *regdata =
> + lmu_bl->chip->cfg->reginfo->channel;
> + int num_channels = lmu_bl->chip->cfg->num_channels;
> + int i, ret;
> + u8 shift;
> +
> + /*
> + * How to create backlight output channels:
> + * Check 'led_sources' bit and update registers.
> + *
> + * 1) Dual channel configuration
> + * The 1st register data is used for single channel.
> + * The 2nd register data is used for dual channel.
> + *
> + * 2) Multiple channel configuration
> + * Each register data is mapped to bank ID.
> + * Bit shift operation is defined in channel registers.
> + *
> + * Channel register data consists of address, mask, value.
> + */
> +
> + if (num_channels == NUM_DUAL_CHANNEL) {
> + if (lmu_bl->led_sources == LMU_BACKLIGHT_DUAL_CHANNEL_USED)
> + regdata++;
> +
> + return regmap_update_bits(regmap, regdata->reg, regdata->mask,
> + regdata->val);
> + }
> +
> + for (i = 0; regdata && i < num_channels; i++) {
> + /*
> + * Note that the result of regdata->val is shift bit.
> + * The bank_id should be shifted for the channel configuration.
> + */
> + if (test_bit(i, &lmu_bl->led_sources)) {
> + shift = regdata->val;
> + ret = regmap_update_bits(regmap, regdata->reg,
> + regdata->mask,
> + lmu_bl->bank_id << shift);
> + if (ret)
> + return ret;
> + }
> +
> + regdata++;
> + }
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_update_ctrl_mode(struct ti_lmu_bl *lmu_bl)
> +{
> + struct regmap *regmap = lmu_bl->chip->lmu->regmap;
> + const struct lmu_bl_reg_data *regdata =
> + lmu_bl->chip->cfg->reginfo->mode + lmu_bl->bank_id;
> + u8 val = regdata->val;
> +
> + if (!regdata)
> + return 0;
> +
> + /*
> + * Update PWM configuration register.
> + * If the mode is register based, then clear the bit.
> + */
> + if (lmu_bl->mode != BL_PWM_BASED)
> + val = 0;
> +
> + return regmap_update_bits(regmap, regdata->reg, regdata->mask, val);
> +}
> +
> +static int ti_lmu_backlight_convert_ramp_to_index(struct ti_lmu_bl *lmu_bl,
> + enum ti_lmu_bl_ramp_mode mode)
> +{
> + const int *ramp_table = lmu_bl->chip->cfg->ramp_table;
> + const int size = lmu_bl->chip->cfg->size_ramp;
> + unsigned int msec;
> + int i;
> +
> + if (!ramp_table)
> + return -EINVAL;
> +
> + switch (mode) {
> + case BL_RAMP_UP:
> + msec = lmu_bl->ramp_up_msec;
> + break;
> + case BL_RAMP_DOWN:
> + msec = lmu_bl->ramp_down_msec;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (msec <= ramp_table[0])
> + return 0;
> +
> + if (msec > ramp_table[size - 1])
> + return size - 1;
> +
> + for (i = 1; i < size; i++) {
> + if (msec == ramp_table[i])
> + return i;
> +
> + /* Find an approximate index by looking up the table */
> + if (msec > ramp_table[i - 1] && msec < ramp_table[i]) {
> + if (msec - ramp_table[i - 1] < ramp_table[i] - msec)
> + return i - 1;
> + else
> + return i;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int ti_lmu_backlight_set_ramp(struct ti_lmu_bl *lmu_bl)
> +{
> + struct regmap *regmap = lmu_bl->chip->lmu->regmap;
> + const struct ti_lmu_bl_reg *reginfo = lmu_bl->chip->cfg->reginfo;
> + int offset = reginfo->ramp_reg_offset;
> + int i, ret, index;
> + struct lmu_bl_reg_data regdata;
> +
> + for (i = BL_RAMP_UP; i <= BL_RAMP_DOWN; i++) {
> + index = ti_lmu_backlight_convert_ramp_to_index(lmu_bl, i);
> + if (index > 0) {
> + if (!reginfo->ramp)
> + break;
> +
> + regdata = reginfo->ramp[i];
> + if (lmu_bl->bank_id != 0)
> + regdata.val += offset;
> +
> + /* regdata.val is shift bit */
> + ret = regmap_update_bits(regmap, regdata.reg,
> + regdata.mask,
> + index << regdata.val);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_configure(struct ti_lmu_bl *lmu_bl)
> +{
> + int ret;
> +
> + ret = ti_lmu_backlight_check_channel(lmu_bl);
> + if (ret)
> + return ret;
> +
> + ret = ti_lmu_backlight_create_channel(lmu_bl);
> + if (ret)
> + return ret;
> +
> + ret = ti_lmu_backlight_update_ctrl_mode(lmu_bl);
> + if (ret)
> + return ret;
> +
> + return ti_lmu_backlight_set_ramp(lmu_bl);
> +}
> +
> +static int ti_lmu_backlight_init(struct ti_lmu_bl_chip *chip)
> +{
> + struct regmap *regmap = chip->lmu->regmap;
> + const struct lmu_bl_reg_data *regdata =
> + chip->cfg->reginfo->init;
> + int num_init = chip->cfg->reginfo->num_init;
> + int i, ret;
> +
> + for (i = 0; regdata && i < num_init; i++) {
> + ret = regmap_update_bits(regmap, regdata->reg, regdata->mask,
> + regdata->val);
> + if (ret)
> + return ret;
> +
> + regdata++;
> + }
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_reload(struct ti_lmu_bl_chip *chip)
> +{
> + struct ti_lmu_bl *each;
> + int i, ret;
> +
> + ret = ti_lmu_backlight_init(chip);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < chip->num_backlights; i++) {
> + each = chip->lmu_bl + i;
> + ret = ti_lmu_backlight_configure(each);
> + if (ret)
> + return ret;
> +
> + ret = backlight_update_status(each->bl_dev);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_add_device(struct device *dev,
> + struct ti_lmu_bl *lmu_bl)
> +{
> + struct backlight_device *bl_dev;
> + struct backlight_properties props;
> +
> + memset(&props, 0, sizeof(struct backlight_properties));
> + props.type = BACKLIGHT_PLATFORM;
> + props.brightness = lmu_bl->default_brightness;
> + props.max_brightness = lmu_bl->chip->cfg->max_brightness;
> +
> + bl_dev = devm_backlight_device_register(dev, lmu_bl->name,
> + lmu_bl->chip->dev, lmu_bl,
> + &lmu_backlight_ops, &props);
> + if (IS_ERR(bl_dev))
> + return PTR_ERR(bl_dev);
> +
> + lmu_bl->bl_dev = bl_dev;
> +
> + return 0;
> +}
> +
> +static struct ti_lmu_bl_chip *
> +ti_lmu_backlight_register(struct device *dev, struct ti_lmu *lmu,
> + const struct ti_lmu_bl_cfg *cfg)
> +{
> + struct ti_lmu_bl_chip *chip;
> + struct ti_lmu_bl *each;
> + int i, ret;
> +
> + if (!cfg) {
> + dev_err(dev, "Operation is not configured\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return ERR_PTR(-ENOMEM);
> +
> + chip->dev = dev;
> + chip->lmu = lmu;
> + chip->cfg = cfg;
> +
> + ret = ti_lmu_backlight_of_create(chip, dev->of_node);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + ret = ti_lmu_backlight_init(chip);
> + if (ret) {
> + dev_err(dev, "Backlight init err: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + for (i = 0; i < chip->num_backlights; i++) {
> + each = chip->lmu_bl + i;
> +
> + ret = ti_lmu_backlight_configure(each);
> + if (ret) {
> + dev_err(dev, "Backlight config err: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + ret = ti_lmu_backlight_add_device(dev, each);
> + if (ret) {
> + dev_err(dev, "Backlight device err: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + ret = backlight_update_status(each->bl_dev);
> + if (ret) {
> + dev_err(dev, "Backlight update err: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> + }
> +
> + return chip;
> +}
> +
> +static void ti_lmu_backlight_unregister(struct ti_lmu_bl_chip *chip)
> +{
> + struct ti_lmu_bl *each;
> + int i;
> +
> + /* Turn off the brightness */
> + for (i = 0; i < chip->num_backlights; i++) {
> + each = chip->lmu_bl + i;
> + each->bl_dev->props.brightness = 0;
> + backlight_update_status(each->bl_dev);
> + }
> +}
> +
> +static int ti_lmu_backlight_monitor_notifier(struct notifier_block *nb,
> + unsigned long action, void *unused)
> +{
> + struct ti_lmu_bl_chip *chip = container_of(nb, struct ti_lmu_bl_chip,
> + nb);
> +
> + if (action == LMU_EVENT_MONITOR_DONE) {
> + if (ti_lmu_backlight_reload(chip))
> + return NOTIFY_STOP;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static int ti_lmu_backlight_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct ti_lmu *lmu = dev_get_drvdata(dev->parent);
> + struct ti_lmu_bl_chip *chip;
> + int ret;
> +
> + chip = ti_lmu_backlight_register(dev, lmu, &lmu_bl_cfg[pdev->id]);
> + if (IS_ERR(chip))
> + return PTR_ERR(chip);
> +
> + /*
> + * Notifier callback is required because backlight device needs
> + * reconfiguration after fault detection procedure is done by
> + * ti-lmu-fault-monitor driver.
> + */
> + if (chip->cfg->fault_monitor_used) {
> + chip->nb.notifier_call = ti_lmu_backlight_monitor_notifier;
> + ret = blocking_notifier_chain_register(&chip->lmu->notifier,
> + &chip->nb);
> + if (ret)
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, chip);
> +
> + return 0;
> +}
> +
> +static int ti_lmu_backlight_remove(struct platform_device *pdev)
> +{
> + struct ti_lmu_bl_chip *chip = platform_get_drvdata(pdev);
> +
> + if (chip->cfg->fault_monitor_used)
> + blocking_notifier_chain_unregister(&chip->lmu->notifier,
> + &chip->nb);
> +
> + ti_lmu_backlight_unregister(chip);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ti_lmu_backlight_driver = {
> + .probe = ti_lmu_backlight_probe,
> + .remove = ti_lmu_backlight_remove,
> + .driver = {
> + .name = "ti-lmu-backlight",
> + },
> +};
> +
> +module_platform_driver(ti_lmu_backlight_driver)
> +
> +MODULE_DESCRIPTION("TI LMU Backlight Driver");
> +MODULE_AUTHOR("Milo Kim");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:ti-lmu-backlight");
> diff --git a/drivers/video/backlight/ti-lmu-backlight-data.c b/drivers/video/backlight/ti-lmu-backlight-data.c
> new file mode 100644
> index 000000000000..583136cb934d
> --- /dev/null
> +++ b/drivers/video/backlight/ti-lmu-backlight-data.c
> @@ -0,0 +1,304 @@
> +/*
> + * TI LMU (Lighting Management Unit) Backlight Device Data
> + *
> + * Copyright 2015 Texas Instruments
> + *
> + * Author: Milo Kim <milo.kim@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "ti-lmu-backlight-data.h"
> +
> +/* LM3532 */
> +static const struct lmu_bl_reg_data lm3532_init_data[] = {
> + { LM3532_REG_ZONE_CFG_A, LM3532_ZONE_MASK, LM3532_ZONE_0 },
> + { LM3532_REG_ZONE_CFG_B, LM3532_ZONE_MASK, LM3532_ZONE_1 },
> + { LM3532_REG_ZONE_CFG_C, LM3532_ZONE_MASK, LM3532_ZONE_2 },
> +};
> +
> +static const struct lmu_bl_reg_data lm3532_channel_data[] = {
> + { LM3532_REG_OUTPUT_CFG, LM3532_ILED1_CFG_MASK,
> + LM3532_ILED1_CFG_SHIFT },
> + { LM3532_REG_OUTPUT_CFG, LM3532_ILED2_CFG_MASK,
> + LM3532_ILED2_CFG_SHIFT },
> + { LM3532_REG_OUTPUT_CFG, LM3532_ILED3_CFG_MASK,
> + LM3532_ILED3_CFG_SHIFT },
> +};
> +
> +static const struct lmu_bl_reg_data lm3532_mode_data[] = {
> + { LM3532_REG_PWM_A_CFG, LM3532_PWM_A_MASK, LM3532_PWM_ZONE_0 },
> + { LM3532_REG_PWM_B_CFG, LM3532_PWM_B_MASK, LM3532_PWM_ZONE_1 },
> + { LM3532_REG_PWM_C_CFG, LM3532_PWM_C_MASK, LM3532_PWM_ZONE_2 },
> +};
> +
> +static const struct lmu_bl_reg_data lm3532_ramp_data[] = {
> + { LM3532_REG_RAMPUP, LM3532_RAMPUP_MASK, LM3532_RAMPUP_SHIFT },
> + { LM3532_REG_RAMPDN, LM3532_RAMPDN_MASK, LM3532_RAMPDN_SHIFT },
> +};
> +
> +static u8 lm3532_enable_reg = LM3532_REG_ENABLE;
> +
> +static u8 lm3532_brightness_regs[] = {
> + LM3532_REG_BRT_A,
> + LM3532_REG_BRT_B,
> + LM3532_REG_BRT_C,
> +};
> +
> +static const struct ti_lmu_bl_reg lm3532_reg_info = {
> + .init = lm3532_init_data,
> + .num_init = ARRAY_SIZE(lm3532_init_data),
> + .channel = lm3532_channel_data,
> + .mode = lm3532_mode_data,
> + .ramp = lm3532_ramp_data,
> + .enable = &lm3532_enable_reg,
> + .brightness_msb = lm3532_brightness_regs,
> +};
> +
> +/* LM3631 */
> +static const struct lmu_bl_reg_data lm3631_init_data[] = {
> + { LM3631_REG_BRT_MODE, LM3631_MODE_MASK, LM3631_DEFAULT_MODE },
> + { LM3631_REG_BL_CFG, LM3631_MAP_MASK, LM3631_EXPONENTIAL_MAP },
> +};
> +
> +static const struct lmu_bl_reg_data lm3631_channel_data[] = {
> + { LM3631_REG_BL_CFG, LM3631_BL_CHANNEL_MASK, LM3631_BL_SINGLE_CHANNEL },
> + { LM3631_REG_BL_CFG, LM3631_BL_CHANNEL_MASK, LM3631_BL_DUAL_CHANNEL },
> +};
> +
> +static const struct lmu_bl_reg_data lm3631_ramp_data[] = {
> + { LM3631_REG_SLOPE, LM3631_SLOPE_MASK, LM3631_SLOPE_SHIFT },
> +};
> +
> +static u8 lm3631_enable_reg = LM3631_REG_DEVCTRL;
> +static u8 lm3631_brightness_msb_reg = LM3631_REG_BRT_MSB;
> +static u8 lm3631_brightness_lsb_reg = LM3631_REG_BRT_LSB;
> +
> +static const struct ti_lmu_bl_reg lm3631_reg_info = {
> + .init = lm3631_init_data,
> + .num_init = ARRAY_SIZE(lm3631_init_data),
> + .channel = lm3631_channel_data,
> + .ramp = lm3631_ramp_data,
> + .enable = &lm3631_enable_reg,
> + .brightness_msb = &lm3631_brightness_msb_reg,
> + .brightness_lsb = &lm3631_brightness_lsb_reg,
> +};
> +
> +/* LM3632 */
> +static const struct lmu_bl_reg_data lm3632_init_data[] = {
> + { LM3632_REG_CONFIG1, LM3632_OVP_MASK, LM3632_OVP_25V },
> + { LM3632_REG_CONFIG2, LM3632_SWFREQ_MASK, LM3632_SWFREQ_1MHZ },
> +};
> +
> +static const struct lmu_bl_reg_data lm3632_channel_data[] = {
> + { LM3632_REG_ENABLE, LM3632_BL_CHANNEL_MASK, LM3632_BL_SINGLE_CHANNEL },
> + { LM3632_REG_ENABLE, LM3632_BL_CHANNEL_MASK, LM3632_BL_DUAL_CHANNEL },
> +};
> +
> +static const struct lmu_bl_reg_data lm3632_mode_data[] = {
> + { LM3632_REG_IO_CTRL, LM3632_PWM_MASK, LM3632_PWM_MODE },
> +};
> +
> +static u8 lm3632_enable_reg = LM3632_REG_ENABLE;
> +static u8 lm3632_brightness_msb_reg = LM3632_REG_BRT_MSB;
> +static u8 lm3632_brightness_lsb_reg = LM3632_REG_BRT_LSB;
> +
> +static const struct ti_lmu_bl_reg lm3632_reg_info = {
> + .init = lm3632_init_data,
> + .num_init = ARRAY_SIZE(lm3632_init_data),
> + .channel = lm3632_channel_data,
> + .mode = lm3632_mode_data,
> + .enable = &lm3632_enable_reg,
> + .brightness_msb = &lm3632_brightness_msb_reg,
> + .brightness_lsb = &lm3632_brightness_lsb_reg,
> +};
> +
> +/* LM3633 */
> +static const struct lmu_bl_reg_data lm3633_init_data[] = {
> + { LM3633_REG_BOOST_CFG, LM3633_OVP_MASK, LM3633_OVP_40V },
> + { LM3633_REG_BL_RAMP_CONF, LM3633_BL_RAMP_MASK, LM3633_BL_RAMP_EACH },
> +};
> +
> +static const struct lmu_bl_reg_data lm3633_channel_data[] = {
> + { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED1_CFG_MASK,
> + LM3633_HVLED1_CFG_SHIFT },
> + { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED2_CFG_MASK,
> + LM3633_HVLED2_CFG_SHIFT },
> + { LM3633_REG_HVLED_OUTPUT_CFG, LM3633_HVLED3_CFG_MASK,
> + LM3633_HVLED3_CFG_SHIFT },
> +};
> +
> +static const struct lmu_bl_reg_data lm3633_mode_data[] = {
> + { LM3633_REG_PWM_CFG, LM3633_PWM_A_MASK, LM3633_PWM_A_MASK },
> + { LM3633_REG_PWM_CFG, LM3633_PWM_B_MASK, LM3633_PWM_B_MASK },
> +};
> +
> +static const struct lmu_bl_reg_data lm3633_ramp_data[] = {
> + { LM3633_REG_BL0_RAMP, LM3633_BL_RAMPUP_MASK, LM3633_BL_RAMPUP_SHIFT },
> + { LM3633_REG_BL0_RAMP, LM3633_BL_RAMPDN_MASK, LM3633_BL_RAMPDN_SHIFT },
> +};
> +
> +static u8 lm3633_enable_reg = LM3633_REG_ENABLE;
> +
> +static u8 lm3633_brightness_msb_regs[] = {
> + LM3633_REG_BRT_HVLED_A_MSB,
> + LM3633_REG_BRT_HVLED_B_MSB,
> +};
> +
> +static u8 lm3633_brightness_lsb_regs[] = {
> + LM3633_REG_BRT_HVLED_A_LSB,
> + LM3633_REG_BRT_HVLED_B_LSB,
> +};
> +
> +static const struct ti_lmu_bl_reg lm3633_reg_info = {
> + .init = lm3633_init_data,
> + .num_init = ARRAY_SIZE(lm3633_init_data),
> + .channel = lm3633_channel_data,
> + .mode = lm3633_mode_data,
> + .ramp = lm3633_ramp_data,
> + .ramp_reg_offset = 1, /* For LM3633_REG_BL1_RAMPUP/DN */
> + .enable = &lm3633_enable_reg,
> + .brightness_msb = lm3633_brightness_msb_regs,
> + .brightness_lsb = lm3633_brightness_lsb_regs,
> +};
> +
> +/* LM3695 */
> +static const struct lmu_bl_reg_data lm3695_init_data[] = {
> + { LM3695_REG_GP, LM3695_BRT_RW_MASK, LM3695_BRT_RW_MASK },
> +};
> +
> +static const struct lmu_bl_reg_data lm3695_channel_data[] = {
> + { LM3695_REG_GP, LM3695_BL_CHANNEL_MASK, LM3695_BL_SINGLE_CHANNEL },
> + { LM3695_REG_GP, LM3695_BL_CHANNEL_MASK, LM3695_BL_DUAL_CHANNEL },
> +};
> +
> +static u8 lm3695_enable_reg = LM3695_REG_GP;
> +static u8 lm3695_brightness_msb_reg = LM3695_REG_BRT_MSB;
> +static u8 lm3695_brightness_lsb_reg = LM3695_REG_BRT_LSB;
> +
> +static const struct ti_lmu_bl_reg lm3695_reg_info = {
> + .init = lm3695_init_data,
> + .num_init = ARRAY_SIZE(lm3695_init_data),
> + .channel = lm3695_channel_data,
> + .enable = &lm3695_enable_reg,
> + .enable_usec = 600,
> + .brightness_msb = &lm3695_brightness_msb_reg,
> + .brightness_lsb = &lm3695_brightness_lsb_reg,
> +};
> +
> +/* LM3697 */
> +static const struct lmu_bl_reg_data lm3697_init_data[] = {
> + { LM3697_REG_RAMP_CONF, LM3697_RAMP_MASK, LM3697_RAMP_EACH },
> +};
> +
> +static const struct lmu_bl_reg_data lm3697_channel_data[] = {
> + { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED1_CFG_MASK,
> + LM3697_HVLED1_CFG_SHIFT },
> + { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED2_CFG_MASK,
> + LM3697_HVLED2_CFG_SHIFT },
> + { LM3697_REG_HVLED_OUTPUT_CFG, LM3697_HVLED3_CFG_MASK,
> + LM3697_HVLED3_CFG_SHIFT },
> +};
> +
> +static const struct lmu_bl_reg_data lm3697_mode_data[] = {
> + { LM3697_REG_PWM_CFG, LM3697_PWM_A_MASK, LM3697_PWM_A_MASK },
> + { LM3697_REG_PWM_CFG, LM3697_PWM_B_MASK, LM3697_PWM_B_MASK },
> +};
> +
> +static const struct lmu_bl_reg_data lm3697_ramp_data[] = {
> + { LM3697_REG_BL0_RAMP, LM3697_RAMPUP_MASK, LM3697_RAMPUP_SHIFT },
> + { LM3697_REG_BL0_RAMP, LM3697_RAMPDN_MASK, LM3697_RAMPDN_SHIFT },
> +};
> +
> +static u8 lm3697_enable_reg = LM3697_REG_ENABLE;
> +
> +static u8 lm3697_brightness_msb_regs[] = {
> + LM3697_REG_BRT_A_MSB,
> + LM3697_REG_BRT_B_MSB,
> +};
> +
> +static u8 lm3697_brightness_lsb_regs[] = {
> + LM3697_REG_BRT_A_LSB,
> + LM3697_REG_BRT_B_LSB,
> +};
> +
> +static const struct ti_lmu_bl_reg lm3697_reg_info = {
> + .init = lm3697_init_data,
> + .num_init = ARRAY_SIZE(lm3697_init_data),
> + .channel = lm3697_channel_data,
> + .mode = lm3697_mode_data,
> + .ramp = lm3697_ramp_data,
> + .ramp_reg_offset = 1, /* For LM3697_REG_BL1_RAMPUP/DN */
> + .enable = &lm3697_enable_reg,
> + .brightness_msb = lm3697_brightness_msb_regs,
> + .brightness_lsb = lm3697_brightness_lsb_regs,
> +};
> +
> +static int lm3532_ramp_table[] = { 0, 1, 2, 4, 8, 16, 32, 65 };
> +
> +static int lm3631_ramp_table[] = {
> + 0, 1, 2, 5, 10, 20, 50, 100,
> + 250, 500, 750, 1000, 1500, 2000, 3000, 4000,
> +};
> +
> +static int common_ramp_table[] = {
> + 2, 250, 500, 1000, 2000, 4000, 8000, 16000,
> +};
> +
> +#define LM3532_MAX_CHANNELS 3
> +#define LM3631_MAX_CHANNELS 2
> +#define LM3632_MAX_CHANNELS 2
> +#define LM3633_MAX_CHANNELS 3
> +#define LM3695_MAX_CHANNELS 2
> +#define LM3697_MAX_CHANNELS 3
> +
> +const struct ti_lmu_bl_cfg lmu_bl_cfg[LMU_MAX_ID] = {
> + {
> + .reginfo = &lm3532_reg_info,
> + .num_channels = LM3532_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_8BIT,
> + .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
> + .ramp_table = lm3532_ramp_table,
> + .size_ramp = ARRAY_SIZE(lm3532_ramp_table),
> + },
> + {
> + .reginfo = &lm3631_reg_info,
> + .num_channels = LM3631_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_11BIT,
> + .pwm_action = UPDATE_PWM_ONLY,
> + .ramp_table = lm3631_ramp_table,
> + .size_ramp = ARRAY_SIZE(lm3631_ramp_table),
> + },
> + {
> + .reginfo = &lm3632_reg_info,
> + .num_channels = LM3632_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_11BIT,
> + .pwm_action = UPDATE_PWM_ONLY,
> + },
> + {
> + .reginfo = &lm3633_reg_info,
> + .num_channels = LM3633_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_11BIT,
> + .pwm_action = UPDATE_MAX_BRT,
> + .ramp_table = common_ramp_table,
> + .size_ramp = ARRAY_SIZE(common_ramp_table),
> + .fault_monitor_used = true,
> + },
> + {
> + .reginfo = &lm3695_reg_info,
> + .num_channels = LM3695_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_11BIT,
> + .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
> + },
> + {
> + .reginfo = &lm3697_reg_info,
> + .num_channels = LM3697_MAX_CHANNELS,
> + .max_brightness = MAX_BRIGHTNESS_11BIT,
> + .pwm_action = UPDATE_PWM_AND_BRT_REGISTER,
> + .ramp_table = common_ramp_table,
> + .size_ramp = ARRAY_SIZE(common_ramp_table),
> + .fault_monitor_used = true,
> + },
> +};
> diff --git a/drivers/video/backlight/ti-lmu-backlight-data.h b/drivers/video/backlight/ti-lmu-backlight-data.h
> new file mode 100644
> index 000000000000..c64e8e6513e1
> --- /dev/null
> +++ b/drivers/video/backlight/ti-lmu-backlight-data.h
> @@ -0,0 +1,95 @@
> +/*
> + * TI LMU (Lighting Management Unit) Backlight Device Data Definitions
> + *
> + * Copyright 2015 Texas Instruments
> + *
> + * Author: Milo Kim <milo.kim@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __TI_LMU_BACKLIGHT_H__
> +#define __TI_LMU_BACKLIGHT_H__
> +
> +#include <linux/mfd/ti-lmu.h>
> +#include <linux/mfd/ti-lmu-register.h>
> +
> +#define MAX_BRIGHTNESS_8BIT 255
> +#define MAX_BRIGHTNESS_11BIT 2047
> +
> +enum ti_lmu_bl_pwm_action {
> + /* Update PWM duty, no brightness register update is required */
> + UPDATE_PWM_ONLY,
> + /* Update not only duty but also brightness register */
> + UPDATE_PWM_AND_BRT_REGISTER,
> + /* Update max value in brightness registers */
> + UPDATE_MAX_BRT,
> +};
> +
> +struct lmu_bl_reg_data {
> + u8 reg;
> + u8 mask;
> + u8 val;
> +};
> +
> +/**
> + * struct ti_lmu_bl_reg
> + *
> + * @init: Device initialization registers
> + * @num_init: Numbers of initialization registers
> + * @channel: Backlight channel configuration registers
> + * @mode: Brightness control mode registers
> + * @ramp: Ramp registers for lighting effect
> + * @ramp_reg_offset: Ramp register offset.
> + * Only used for multiple ramp registers.
> + * @enable: Enable control register address
> + * @enable_usec: Delay time for updating enable register.
> + * Unit is microsecond.
> + * @brightness_msb: Brightness MSB(Upper 8 bits) registers.
> + * Concatenated with LSB in 11 bit dimming mode.
> + * In 8 bit dimming, only MSB is used.
> + * @brightness_lsb: Brightness LSB(Lower 3 bits) registers.
> + * Only valid in 11 bit dimming mode.
> + */
> +struct ti_lmu_bl_reg {
> + const struct lmu_bl_reg_data *init;
> + int num_init;
> + const struct lmu_bl_reg_data *channel;
> + const struct lmu_bl_reg_data *mode;
> + const struct lmu_bl_reg_data *ramp;
> + int ramp_reg_offset;
> + u8 *enable;
> + unsigned long enable_usec;
> + u8 *brightness_msb;
> + u8 *brightness_lsb;
> +};
> +
> +/**
> + * struct ti_lmu_bl_cfg
> + *
> + * @reginfo: Device register configuration
> + * @num_channels: Number of backlight channels
> + * @max_brightness: Max brightness value of backlight device
> + * @pwm_action: How to control brightness registers in PWM mode
> + * @ramp_table: [Optional] Ramp time table for lighting effect.
> + * It's used for searching approximate register index.
> + * @size_ramp: [Optional] Size of ramp table
> + * @fault_monitor_used: [Optional] Set true if the device needs to handle
> + * LMU fault monitor event.
> + *
> + * This structure is used for device specific data configuration.
> + */
> +struct ti_lmu_bl_cfg {
> + const struct ti_lmu_bl_reg *reginfo;
> + int num_channels;
> + int max_brightness;
> + enum ti_lmu_bl_pwm_action pwm_action;
> + int *ramp_table;
> + int size_ramp;
> + bool fault_monitor_used;
> +};
> +
> +extern const struct ti_lmu_bl_cfg lmu_bl_cfg[LMU_MAX_ID];
> +#endif
>
Powered by blists - more mailing lists