| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAALAos9LiwDXFR=F0dWvH8ED0eWBC85WgLsHsULX1GrujYPPSA@mail.gmail.com>
Date: Sun, 10 Sep 2017 11:17:19 +0530
From: Anup Patel <anup.patel@...adcom.com>
To: Auger Eric <eric.auger@...hat.com>
Cc: Will Deacon <will.deacon@....com>,
Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>,
Baptiste Reynal <b.reynal@...tualopensystems.com>,
Alex Williamson <alex.williamson@...hat.com>,
kvm@...r.kernel.org, Scott Branden <sbranden@...adcom.com>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Linux IOMMU <iommu@...ts.linux-foundation.org>,
BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
Linux ARM Kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v8] vfio: platform: reset: Add Broadcom FlexRM reset module
On Fri, Sep 8, 2017 at 9:28 PM, Auger Eric <eric.auger@...hat.com> wrote:
> Hi Anup,
>
> On 06/09/2017 13:18, Anup Patel wrote:
>> This patch adds Broadcom FlexRM low-level reset for
>> VFIO platform.
>>
>> It will do the following:
>> 1. Disable/Deactivate each FlexRM ring
>> 2. Flush each FlexRM ring
>>
>> The cleanup sequence for FlexRM rings is adapted from
>> Broadcom FlexRM mailbox driver.
>>
>> Signed-off-by: Anup Patel <anup.patel@...adcom.com>
>> Reviewed-by: Oza Oza <oza.oza@...adcom.com>
>> Reviewed-by: Scott Branden <scott.branden@...adcom.com>
>> Reviewed-by: Eric Auger <eric.auger@...hat.com>
>> ---
>> drivers/vfio/platform/reset/Kconfig | 9 ++
>> drivers/vfio/platform/reset/Makefile | 1 +
>> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 115 +++++++++++++++++++++
>> 3 files changed, 125 insertions(+)
>> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..392e3c0 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>> Enables the VFIO platform driver to handle reset for AMD XGBE
>>
>> If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> + tristate "VFIO support for Broadcom FlexRM reset"
>> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
>> + default ARCH_BCM_IPROC
>> + help
>> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> +
>> + If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..8d9874b 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>>
>> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> new file mode 100644
>> index 0000000..5a17d50
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> @@ -0,0 +1,115 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/*
>> + * This driver provides reset support for Broadcom FlexRM ring manager
>> + * to VFIO platform.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +/* FlexRM configuration */
>> +#define RING_REGS_SIZE 0x10000
>> +#define RING_VER_MAGIC 0x76303031
>> +
>> +/* Per-Ring register offsets */
>> +#define RING_VER 0x000
>> +#define RING_CONTROL 0x034
>> +#define RING_FLUSH_DONE 0x038
>> +
>> +/* Register RING_CONTROL fields */
>> +#define CONTROL_FLUSH_SHIFT 5
>> +
>> +/* Register RING_FLUSH_DONE fields */
>> +#define FLUSH_DONE_MASK 0x1
>> +
>> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> +{
>> + unsigned int timeout;
>> +
>> + /* Disable/inactivate ring */
>> + writel_relaxed(0x0, ring + RING_CONTROL);
>> +
>> + /* Set ring flush state */
>> + timeout = 1000; /* timeout of 1s */
>> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> + do {
>> + if (readl_relaxed(ring + RING_FLUSH_DONE) &
>> + FLUSH_DONE_MASK)
>> + break;
>> + mdelay(1);
>> + } while (--timeout);
>> + if (!timeout)
>> + return -ETIMEDOUT;
>> +
>> + /* Clear ring flush state */
>> + timeout = 1000; /* timeout of 1s */
>> + writel_relaxed(0x0, ring + RING_CONTROL);
>> + do {
>> + if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
>> + FLUSH_DONE_MASK))
>> + break;
>> + mdelay(1);
>> + } while (--timeout);
>> + if (!timeout)
>> + return -ETIMEDOUT;
> As this sequence is not part of flexrm_shutdown() in
> drivers/mailbox/bcm-flexrm-mailbox.c, do you plan to update the native
> driver with that addition?
Yes, we have to send fix for bcm-flexrm-mailbox.c which should
also be taken by Linux stable tree.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
>> +{
>> + void __iomem *ring;
>> + int rc = 0, ret = 0, ring_num = 0;
>> + struct vfio_platform_region *reg = &vdev->regions[0];
>> +
>> + /* Map FlexRM ring registers if not mapped */
>> + if (!reg->ioaddr) {
>> + reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
>> + if (!reg->ioaddr)
>> + return -ENOMEM;
>> + }
>> +
>> + /* Discover and shutdown each FlexRM ring */
>> + for (ring = reg->ioaddr;
>> + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
>> + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) {
>> + rc = vfio_platform_bcmflexrm_shutdown(ring);
>> + if (rc) {
>> + dev_warn(vdev->device,
>> + "FlexRM ring%d shutdown error %d\n",
>> + ring_num, rc);
> sorry but ring_num sticks to 0.
Ahh, good catch.
Thanks,
Anup
Powered by blists - more mailing lists