| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e079ebdf-8cfa-20fb-5132-1905d8b67623@redhat.com>
Date: Mon, 11 Sep 2017 21:13:19 +0200
From: Auger Eric <eric.auger@...hat.com>
To: Anup Patel <anup.patel@...adcom.com>,
Will Deacon <will.deacon@....com>,
Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>,
Baptiste Reynal <b.reynal@...tualopensystems.com>,
Alex Williamson <alex.williamson@...hat.com>
Cc: kvm@...r.kernel.org, Scott Branden <sbranden@...adcom.com>,
linux-kernel@...r.kernel.org, iommu@...ts.linux-foundation.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v9] vfio: platform: reset: Add Broadcom FlexRM reset
module
Hi Anup,
On 10/09/2017 08:56, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
>
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
>
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
>
> Signed-off-by: Anup Patel <anup.patel@...adcom.com>
> Reviewed-by: Oza Oza <oza.oza@...adcom.com>
> Reviewed-by: Scott Branden <scott.branden@...adcom.com>
> Reviewed-by: Eric Auger <eric.auger@...hat.com>
Reviewed-by: Eric Auger <eric.auger@...hat.com> (again after the misc
changes)
Thanks
Eric
> ---
> drivers/vfio/platform/reset/Kconfig | 9 ++
> drivers/vfio/platform/reset/Makefile | 1 +
> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 116 +++++++++++++++++++++
> 3 files changed, 126 insertions(+)
> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..392e3c0 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
> Enables the VFIO platform driver to handle reset for AMD XGBE
>
> If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> + tristate "VFIO support for Broadcom FlexRM reset"
> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
> + default ARCH_BCM_IPROC
> + help
> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> + If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>
> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..ca1cbd7
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,116 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE 0x10000
> +#define RING_VER_MAGIC 0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER 0x000
> +#define RING_CONTROL 0x034
> +#define RING_FLUSH_DONE 0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT 5
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK 0x1
> +
> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> + unsigned int timeout;
> +
> + /* Disable/inactivate ring */
> + writel_relaxed(0x0, ring + RING_CONTROL);
> +
> + /* Set ring flush state */
> + timeout = 1000; /* timeout of 1s */
> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> + do {
> + if (readl_relaxed(ring + RING_FLUSH_DONE) &
> + FLUSH_DONE_MASK)
> + break;
> + mdelay(1);
> + } while (--timeout);
> + if (!timeout)
> + return -ETIMEDOUT;
> +
> + /* Clear ring flush state */
> + timeout = 1000; /* timeout of 1s */
> + writel_relaxed(0x0, ring + RING_CONTROL);
> + do {
> + if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
> + FLUSH_DONE_MASK))
> + break;
> + mdelay(1);
> + } while (--timeout);
> + if (!timeout)
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> + void __iomem *ring;
> + int rc = 0, ret = 0, ring_num = 0;
> + struct vfio_platform_region *reg = &vdev->regions[0];
> +
> + /* Map FlexRM ring registers if not mapped */
> + if (!reg->ioaddr) {
> + reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> + if (!reg->ioaddr)
> + return -ENOMEM;
> + }
> +
> + /* Discover and shutdown each FlexRM ring */
> + for (ring = reg->ioaddr;
> + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) {
> + rc = vfio_platform_bcmflexrm_shutdown(ring);
> + if (rc) {
> + dev_warn(vdev->device,
> + "FlexRM ring%d shutdown error %d\n",
> + ring_num, rc);
> + ret |= rc;
> + }
> + ring_num++;
> + }
> + }
> +
> + return ret;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> + vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <anup.patel@...adcom.com>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>
Powered by blists - more mailing lists