Message-ID: <1505244724.4482.78.camel@intel.com>
Date:   Tue, 12 Sep 2017 12:32:04 -0700
From:   Sai Praneeth Prakhya <sai.praneeth.prakhya@...el.com>
To:     x86@...nel.org, linux-kernel <linux-kernel@...r.kernel.org>,
        Borislav Petkov <bp@...en8.de>, torvalds@...ux-foundation.org,
        akpm@...ux-foundation.org, mgorman@...e.de, linux-mm@...ck.org,
        nadav.amit@...il.com, riel@...hat.com,
        "Hansen, Dave" <dave.hansen@...el.com>, arjan@...ux.intel.com,
        Peter Zijlstra <peterz@...radead.org>,
        Andy Lutomirski <luto@...nel.org>
Cc:     "Luck, Tony" <tony.luck@...el.com>,
        "Shankar, Ravi V" <ravi.v.shankar@...el.com>,
        Matt Fleming <matt@...eblueprint.co.uk>,
        "Yu, Fenghua" <fenghua.yu@...el.com>, mingo@...nel.org
Subject: Re: [PATCH v4 00/10] PCID and improved laziness

> From: Andy Lutomirski <luto@...nel.org>
> Date: Thu, Jun 29, 2017 at 8:53 AM
> Subject: [PATCH v4 00/10] PCID and improved laziness
> To: x86@...nel.org
> Cc: linux-kernel@...r.kernel.org, Borislav Petkov <bp@...en8.de>,
> Linus Torvalds <torvalds@...ux-foundation.org>, Andrew Morton
> <akpm@...ux-foundation.org>, Mel Gorman <mgorman@...e.de>,
> "linux-mm@...ck.org" <linux-mm@...ck.org>, Nadav Amit
> <nadav.amit@...il.com>, Rik van Riel <riel@...hat.com>, Dave Hansen
> <dave.hansen@...el.com>, Arjan van de Ven <arjan@...ux.intel.com>,
> Peter Zijlstra <peterz@...radead.org>, Andy Lutomirski
> <luto@...nel.org>
> 
> 
> *** Ingo, even if this misses 4.13, please apply the first patch
> before
> *** the merge window.
> 
> There are three performance benefits here:
> 
> 1. TLB flushing is slow.  (I.e. the flush itself takes a while.)
>    This avoids many of them when switching tasks by using PCID.  In
>    a stupid little benchmark I did, it saves about 100ns on my laptop
>    per context switch.  I'll try to improve that benchmark.
> 
> 2. Mms that have been used recently on a given CPU might get to keep
>    their TLB entries alive across process switches with this patch
>    set.  TLB fills are pretty fast on modern CPUs, but they're even
>    faster when they don't happen.
> 
> 3. Lazy TLB is way better.  We used to do two stupid things when we
>    ran kernel threads: we'd send IPIs to flush user contexts on their
>    CPUs and then we'd write to CR3 for no particular reason as an
> excuse
>    to stop further IPIs.  With this patch, we do neither.
> 
> This will, in general, perform suboptimally if paravirt TLB flushing
> is in use (currently just Xen, I think, but Hyper-V is in the works).
> The code is structured so we could fix it in one of two ways: we
> could take a spinlock when touching the percpu state so we can update
> it remotely after a paravirt flush, or we could be more careful about
> our exactly how we access the state and use cmpxchg16b to do atomic
> remote updates.  (On SMP systems without cmpxchg16b, we'd just skip
> the optimization entirely.)
> 
> This is still missing a final comment-only patch to add overall
> documentation for the whole thing, but I didn't want to block sending
> the maybe-hopefully-final code on that.
> 
> This is based on tip:x86/mm.  The branch is here if you want to play:
> https://git.kernel.org/pub/scm/linux/kernel/git/luto/linux.git/log/?h=x86/pcid
> 
> In general, performance seems to exceed my expectations.  Here are
> some performance numbers copy-and-pasted from the changelogs for
> "Rework lazy TLB mode and TLB freshness" and "Try to preserve old
> TLB entries using PCID":
> 
> 

Hi Andy,

I have booted Linus's tree (8fac2f96ab86b0e14ec4e42851e21e9b518bdc55) on
Skylake server and noticed that it reboots automatically.

When I booted the same kernel with command line arg "nopcid" it works
fine. Please find below a snippet of dmesg. Please let me know if you
need more info to debug.

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0+
root=UUID=3b8e9636-6e23-4785-a4e2-5954bfe86fd9 ro console=tty0
console=ttyS0,115200n8
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 258048 bytes
[    0.000000] log_buf_len min size: 262144 bytes
[    0.000000] log_buf_len: 524288 bytes
[    0.000000] early log buf free: 212560(81%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/mm/tlb.c:245
initialize_tlbstate_and_flush+0x6c/0xf0
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0+ #5
[    0.000000] task: ffffffff8960f480 task.stack: ffffffff89600000
[    0.000000] RIP: 0010:initialize_tlbstate_and_flush+0x6c/0xf0
[    0.000000] RSP: 0000:ffffffff89603e60 EFLAGS: 00010046
[    0.000000] RAX: 00000000000406b0 RBX: ffff9f1700a17880 RCX:
ffffffff8965de60
[    0.000000] RDX: 0000008383a0a000 RSI: 000000000960a000 RDI:
0000008383a0a000
[    0.000000] RBP: ffffffff89603e60 R08: 0000000000000000 R09:
0000ffffffffffff
[    0.000000] R10: ffffffff89603ee8 R11: ffffffff0000ffff R12:
0000000000000000
[    0.000000] R13: ffff9f1700a0c3e0 R14: ffffffff8960f480 R15:
0000000000000000
[    0.000000] FS:  0000000000000000(0000) GS:ffff9f1700a00000(0000)
knlGS:0000000000000000
[    0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000000] CR2: ffff9fa7bffff000 CR3: 0000008383a0a000 CR4:
00000000000406b0
[    0.000000] Call Trace:
[    0.000000]  cpu_init+0x206/0x4f0
[    0.000000]  ? __set_pte_vaddr+0x1d/0x30
[    0.000000]  trap_init+0x3e/0x50
[    0.000000]  ? trap_init+0x3e/0x50
[    0.000000]  start_kernel+0x1e2/0x3f2
[    0.000000]  x86_64_start_reservations+0x24/0x26
[    0.000000]  x86_64_start_kernel+0x6f/0x72
[    0.000000]  secondary_startup_64+0xa5/0xa5
[    0.000000] Code: de 00 48 01 f0 48 39 c7 0f 85 92 00 00 00 48 8b 05
ee e2 ee 00 a9 00 00 02 00 74 11 65 48 8b 05 8b 9d 7c 77 a9 00 00 02 00
75 02 <0f> ff 48 81 e2 00 f0 ff ff 0f 22 da 65 66 c7 05 66 9d 7c 77 00 
[    0.000000] ---[ end trace c258f2d278fe031f ]---
[    0.000000] Memory: 791050356K/803934656K available (9585K kernel
code, 1313K rwdata, 3000K rodata, 1176K init, 680K bss, 12884300K
reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64,
Nodes=4
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU event tracing is enabled.
[    0.000000] NR_IRQS: 4352, nr_irqs: 3928, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[    0.001000] tsc: Detected 2000.000 MHz processor
[    0.002000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4000.00 BogoMIPS (lpj=2000000)
[    0.003003] pid_max: default: 65536 minimum: 512
[    0.004030] ACPI: Core revision 20170728
[    0.091853] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.094143] Security Framework initialized
[    0.095004] SELinux:  Initializing.
[    0.145612] Dentry cache hash table entries: 33554432 (order: 16,
268435456 bytes)
[    0.170544] Inode-cache hash table entries: 16777216 (order: 15,
134217728 bytes)
[    0.172699] Mount-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[    0.174441] Mountpoint-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[    0.176351] CPU: Physical Processor ID: 0
[    0.177003] CPU: Processor Core ID: 0
[    0.178007] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.179003] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[    0.180013] mce: CPU supports 20 MCE banks
[    0.181018] CPU0: Thermal monitoring enabled (TM1)
[    0.182057] process: using mwait in idle threads
[    0.183005] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.184003] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.185223] Freeing SMP alternatives memory: 36K
[    0.193912] smpboot: Max logical packages: 8
[    0.194017] Switched APIC routing to physical flat.
[    0.196496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.206252] smpboot: CPU0: Intel(R) Xeon(R) Platinum 8164 CPU @
2.00GHz (family: 0x6, model: 0x55, stepping: 0x4)
[    0.207131] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[    0.208003] ... version:                4
[    0.209001] ... bit width:              48
[    0.210001] ... generic registers:      4
[    0.211001] ... value mask:             0000ffffffffffff
[    0.212001] ... max period:             00007fffffffffff
[    0.213001] ... fixed-purpose events:   3
[    0.214001] ... event mask:             000000070000000f
[    0.215078] Hierarchical SRCU implementation.
[    0.216867] smp: Bringing up secondary CPUs ...
[    0.217085] x86: Booting SMP configuration:
[    0.218001] .... node  #0, CPUs:        #1
[    0.001000] ------------[ cut here ]------------
[    0.001000] WARNING: CPU: 1 PID: 0 at arch/x86/mm/tlb.c:245
initialize_tlbstate_and_flush+0x6c/0xf0
[    0.001000] Modules linked in:
[    0.001000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
4.13.0+ #5
[    0.001000] task: ffff9f16fa393e40 task.stack: ffffaf0e98afc000
[    0.001000] RIP: 0010:initialize_tlbstate_and_flush+0x6c/0xf0
[    0.001000] RSP: 0000:ffffaf0e98affeb0 EFLAGS: 00010046
[    0.001000] RAX: 00000000000000a0 RBX: ffff9f1700a57880 RCX:
ffffffff8965de60
[    0.001000] RDX: 0000008383a0a000 RSI: 000000000960a000 RDI:
0000008383a0a000
[    0.001000] RBP: ffffaf0e98affeb0 R08: 0000000000000000 R09:
0000000000000000
[    0.001000] R10: ffffaf0e98affe78 R11: ffffaf0e98affdb6 R12:
0000000000000001
[    0.001000] R13: ffff9f1700a4c3e0 R14: ffff9f16fa393e40 R15:
0000000000000001
[    0.001000] FS:  0000000000000000(0000) GS:ffff9f1700a40000(0000)
knlGS:0000000000000000
[    0.001000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.001000] CR2: 0000000000000000 CR3: 0000008383a0a000 CR4:
00000000000000a0
[    0.001000] invalid opcode: 0000 [#1] SMP
[    0.001000] Modules linked in:
[    0.001000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
4.13.0+ #5
[    0.001000] task: ffff9f16fa393e40 task.stack: ffffaf0e98afc000
[    0.001000] RIP: 0010:__show_regs+0x255/0x290
[    0.001000] RSP: 0000:ffffaf0e98affbc0 EFLAGS: 00010002
[    0.001000] RAX: 0000000000000018 RBX: 0000000000000000 RCX:
0000000000000000
[    0.001000] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
ffffffff898a978c
[    0.001000] RBP: ffffaf0e98affc10 R08: 0000000000000001 R09:
0000000000000373
[    0.001000] R10: ffffffff8884fb8c R11: ffffffff898ab7cd R12:
00000000ffff0ff0
[    0.001000] R13: 0000000000000400 R14: ffff9f1700a40000 R15:
0000000000000000
[    0.001000] FS:  0000000000000000(0000) GS:ffff9f1700a40000(0000)
knlGS:0000000000000000
[    0.001000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.001000] CR2: 0000000000000000 CR3: 0000008383a0a000 CR4:
00000000000000a0
--------------------<snip>--------------------------------------
[    0.001000] invalid opcode: 0000 [#20] SMP
[    0.001000] Modules linked in:
[    0.001000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
4.13.0+ #5
[    0.001000] task: ffff9f16fa393e40 task.stack: ffffaf0e98afc000
[    0.001000] RIP: 0010:__show_regs+0x255/0x290
[    0.001000] RSP: 0000:ffffaf0e98afc788 EFLAGS: 00010002
[    0.001000] RAX: 0000000000000018 RBX: 0000000000000000 RCX:
0000000000000000
[    0.001000] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
ffffffff898a978c
[    0.001000] RBP: ffffaf0e98afc7d8 R08: 0000000000000001 R09:
0000000000000490
[    0.001000] R10: ffffffff88818785 R11: ffffffff898ab7cd R12:
00000000ffff0ff0
[    0.001000] R13: 0000000000000400 R14: ffff9f1700a40000 R15:
0000000000000000
[    0.001000] FS:  0000000000000000(0000) GS:ffff9f1700a40000(0000)
knlGS:0000000000000000
[    0.001000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.001000] CR2: 0000000000000000 CR3: 0000008383a0a000 CR4:
00000000000000a0
Force an S5 exit path.

Regards,
Sai

Powered by blists - more mailing lists