[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1505355021.8308.4.camel@mhfsdcap03>
Date: Thu, 14 Sep 2017 10:10:21 +0800
From: Chaotian Jing <chaotian.jing@...iatek.com>
To: Rob Herring <robh@...nel.org>
CC: Ulf Hansson <ulf.hansson@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
"Catalin Marinas" <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
"yong mao" <yong.mao@...iatek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Phong LE <ple@...libre.com>, <linux-mmc@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <srv_heupstream@...iatek.com>
Subject: Re: [PATCH 01/12] mmc: dt-bindings: update Mediatek MMC bindings
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote:
> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote:
> > Change the comptiable for support of multi-platform
> > Add description for reg
> > Add description for source_cg
> > Add description for mediatek,latch-ck
>
> This is at least the 3rd patch with exactly the same vague subject.
> Please make the subject somewhat unique.
>
Thx, will change the subject at next version
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> > ---
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> > 1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > index 4182ea3..405cd06 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> > and the properties used by the msdc driver.
> >
> > Required properties:
> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> > +- compatible: value should be either of the following.
> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> > +- reg: physical base address of the controller and length
> > - interrupts: Should contain MSDC interrupt number
> > -- clocks: MSDC source clock, HCLK
> > -- clock-names: "source", "hclk"
> > +- clocks: MSDC source clock, HCLK, source_cg
> > +- clock-names: "source", "hclk", "source_cg"
>
> All chips support source_cg? That's not backwards compatible for
> existing compatible strings if the driver requires it.
Not all chips support source_cg, for chips which do not support
source_cg, no need source_cg here, and the driver will parse it
to know if current chip support it.
>
> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
> > @@ -30,6 +35,8 @@ Optional properties:
> > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> > If present,HS400 command responses are sampled on rising edges.
> > If not present,HS400 command responses are sampled on falling edges.
> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc
>
> What's a project?
eg, MT2701
>
> > + error caused by stop clock(fifo full)
> >
> > Examples:
> > mmc0: mmc@...30000 {
> > --
> > 1.8.1.1.dirty
> >
Powered by blists - more mailing lists