linux-kernel - [PATCH 3/3] ARM: dts: at91: sama5d27_som1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1505399294-20041-4-git-send-email-claudiu.beznea@microchip.com>
Date:   Thu, 14 Sep 2017 17:28:14 +0300
From:   Claudiu Beznea <claudiu.beznea@...rochip.com>
To:     <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...e-electrons.com>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <linux@...linux.org.uk>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH 3/3] ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus

From: Nicolas Ferre <nicolas.ferre@...rochip.com>

The USB host has 3 ports so we must specify the entries for each
in the atmel,vbus-gpio property.
The specified pin (PA27) is the vbus for USBB and not USBA.

Signed-off-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
[claudiu.beznea@...rochip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index be5cd913f274..60cb084a8d92 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -67,7 +67,10 @@
 
 		usb1: ohci@...00000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
-- 
2.7.4