linux-kernel - [PATCH] dmaengine: imx-sdma: Correct addr widths

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1505367560-24071-1-git-send-email-nicoleotsuka@gmail.com>
Date:   Wed, 13 Sep 2017 22:39:20 -0700
From:   Nicolin Chen <nicoleotsuka@...il.com>
To:     vinod.koul@...el.com
Cc:     fabio.estevam@....com, dan.j.williams@...el.com,
        dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] dmaengine: imx-sdma: Correct addr widths

The driver also supports 2_BYTES and 1_BYTE in sdma_prep_slave_sg().
So this patch just adds them to the lists.

Signed-off-by: Nicolin Chen <nicoleotsuka@...il.com>
---
 drivers/dma/imx-sdma.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index a67ec1b..2be8d0d 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -178,6 +178,10 @@
 #define SDMA_WATERMARK_LEVEL_HWE	BIT(29)
 #define SDMA_WATERMARK_LEVEL_CONT	BIT(31)
 
+#define SDMA_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
 /*
  * Mode/Count of data node descriptors - IPCv2
  */
@@ -1851,8 +1855,8 @@ static int sdma_probe(struct platform_device *pdev)
 	sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
 	sdma->dma_device.device_config = sdma_config;
 	sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
-	sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
-	sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS;
+	sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS;
 	sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
 	sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
 	sdma->dma_device.device_issue_pending = sdma_issue_pending;
-- 
2.1.4