lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 18 Sep 2017 19:14:34 +0800
From:   Jeffy Chen <>
Cc:,,,, Jeffy Chen <>,,,
        Liam Girdwood <>,
        Rob Herring <>,
        Mark Rutland <>
Subject: [PATCH v11 1/2] ASoC: rt5514: Add devicetree binding support for rt5514-spi

Add devicetree binding support for rt5514 spi dsp codec.

Signed-off-by: Jeffy Chen <>

Changes in v11:
Use same compatible for rt5514-i2c & rt5514-spi.

Changes in v10:
Put rt5514-i2c doc & rt5514-spi doc together.

Changes in v9:
Address comments from Brian.

 Documentation/devicetree/bindings/sound/rt5514.txt | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index 929ca6756b02..4f33b0d96afe 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -1,22 +1,27 @@
 RT5514 audio CODEC
-This device supports I2C only.
+This device supports both I2C and SPI.
 Required properties:
 - compatible : "realtek,rt5514".
-- reg : The I2C address of the device.
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
 Optional properties:
 - clocks: The phandle of the master clock to the CODEC
 - clock-names: Should be "mclk"
+- interrupt-parent: The phandle for the interrupt controller.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
 - realtek,dmic-init-delay-ms
-  Set the DMIC initial delay (ms) to wait it ready.
+  Set the DMIC initial delay (ms) to wait it ready for I2C.
-Pins on the device (for linking into audio routes) for RT5514:
+Pins on the device (for linking into audio routes) for I2C:
   * DMIC1L
   * DMIC1R

Powered by blists - more mailing lists