linux-kernel - Re: [RESEND PATCH v4 0/2] add thermal nodes for UniPhier SoCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAK7LNATX2bNGDTgEHrv9gjah_4ZXrTjRg45hPVOze774RB1_wg@mail.gmail.com>
Date:   Mon, 18 Sep 2017 21:10:23 +0900
From:   Masahiro Yamada <yamada.masahiro@...ionext.com>
To:     Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [RESEND PATCH v4 0/2] add thermal nodes for UniPhier SoCs

2017-09-04 15:58 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>:
> This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs.
>
> Resending the patches to apply the missing comments,
> please ignore previous v4.
>
> Changes since v3:
> - use the dt-bindings header to replace the limit values with THERMAL_NO_LIMIT
> - add the calibration value to uniphier-pxs2.dtsi
> - move the calibration value to uniphier-ld20.dtsi
>
> Changes since v2:
> - add the calibration value to device tree for LD20 reference board
>
> Changes since v1:
> - separate from driver's patchset[1]
> - add cooling-maps nodes on the device tree
> - fix an interrupt trigger to set 'level-triggered' according to
>   hardware specification
> - bring up threshold temperature for LD20 according to the spec sheet
> - add cpuN labels for reference in cooling-device property on PXs2 dts
>
> [1] https://lkml.org/lkml/2017/6/28/170
>
> Kunihiko Hayashi (2):
>   ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for
>     PXs2
>   arm64: dts: uniphier: add nodes of thermal monitor and thermal zone
>     for LD20
>
>  arch/arm/boot/dts/uniphier-pxs2.dtsi             | 47 ++++++++++++++++++++++--
>  arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 45 +++++++++++++++++++++++
>  2 files changed, 88 insertions(+), 4 deletions(-)
>

Series, applied to linux-uniphier.  Thanks!

-- 
Best Regards
Masahiro Yamada