[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170920211413.GA36148@dtor-ws>
Date: Wed, 20 Sep 2017 14:14:13 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Rob Herring <robh@...nel.org>
Cc: Chen Zhong <chen.zhong@...iatek.com>,
Lee Jones <lee.jones@...aro.org>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Eddie Huang <eddie.huang@...iatek.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Andi Shyti <andi.shyti@...sung.com>,
Jaechul Lee <jcsing.lee@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-rtc@...r.kernel.org
Subject: Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for
mtk-pmic-keys
On Wed, Sep 20, 2017 at 03:53:01PM -0500, Rob Herring wrote:
> On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> >
> > Signed-off-by: Chen Zhong <chen.zhong@...iatek.com>
> > ---
> > .../devicetree/bindings/input/mtk-pmic-keys.txt | 41 ++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..fd48ff7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,41 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > + be used for reporting keys presses. The array can
> > + contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> > + or not. This can be customized depends on board design.
>
> I think this should be a common property if we're going to put into DT.
> Something like "wakeup-scancodes" to be clear the values are the raw
> scancodes. Alternatively, we could list Linux keycodes instead with
> something like "linux,wakeup-keycodes".
Should we go the gpio-keys way and describe keys as sub-nodes, possibly
using address as index?
mt6397keys: mt6397keys {
...
power@0 {
linux,code = <116>;
wakeup-source;
};
home@1 {
linux,code = <...>;
};
};
Thanks.
--
Dmitry
Powered by blists - more mailing lists