linux-kernel - Re: [PATCH RESEND 1/2] phy: phy-mtk-tphy: fix NULL point of chip bank

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <02a5e183-444a-bc75-2a4e-1337c9e7872e@ti.com>
Date:   Thu, 21 Sep 2017 16:23:50 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Chunfeng Yun <chunfeng.yun@...iatek.com>
CC:     Matthias Brugger <matthias.bgg@...il.com>,
        Ryder Lee <ryder.lee@...iatek.com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH RESEND 1/2] phy: phy-mtk-tphy: fix NULL point of chip bank



On Thursday 21 September 2017 04:01 PM, Chunfeng Yun wrote:
> Chip bank of version-1 is initialized as NULL, but it's used
> by pcie_phy_instance_power_on/off(), so assign it a right
> address.

merged. How was this not noticed before?

Thanks
Kishon
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> ---
>  drivers/phy/mediatek/phy-mtk-tphy.c |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index e3baad7..721a2a1 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -27,6 +27,7 @@
>  /* banks shared by multiple phys */
>  #define SSUSB_SIFSLV_V1_SPLLC		0x000	/* shared by u3 phys */
>  #define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
> +#define SSUSB_SIFSLV_V1_CHIP		0x300	/* shared by u3 phys */
>  /* u2 phy bank */
>  #define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
>  /* u3/pcie/sata phy banks */
> @@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy,
>  	case PHY_TYPE_USB3:
>  	case PHY_TYPE_PCIE:
>  		u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
> -		u3_banks->chip = NULL;
> +		u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
>  		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
>  		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
>  		break;
>