| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1506073332-92438-9-git-send-email-kevin.wangtao@hisilicon.com>
Date: Fri, 22 Sep 2017 17:42:11 +0800
From: Tao Wang <kevin.wangtao@...ilicon.com>
To: <rui.zhang@...el.com>, <edubezval@...il.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <xuwei5@...ilicon.com>,
<catalin.marinas@....com>, <will.deacon@....com>
CC: <leo.yan@...aro.org>, <lonela.Voinescu@....com>,
<Valentin.Schneider@....com>, <vincent.guittot@...aro.org>,
<daniel.lezcano@...aro.org>, <sunzhaosheng@...ilicon.com>,
<gengyanping@...ilicon.com>, <linux-pm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Kevin Wangtao <kevin.wangtao@...aro.org>
Subject: [PATCH 8/9] thermal/drivers/hisi: add support for hi3660 SoC
From: Kevin Wangtao <kevin.wangtao@...aro.org>
This patch adds the support for thermal sensor of Hi3660 SoC.
Hi3660 tsensor support alarm interrupt and have three configurable
alarm thresholds, it also has a configurable hysteresis interval,
interrupt will be triggered when temperature rise above the alarm
threshold or fall below the hysteresis threshold.
Signed-off-by: Kevin Wangtao <kevin.wangtao@...aro.org>
---
drivers/thermal/hisi_thermal.c | 146 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 145 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 718376b..133238a 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -39,12 +39,24 @@
#define HI6220_TEMP0_RST_MSK (0x1C)
#define HI6220_TEMP0_VALUE (0x28)
+#define HI3660_OFFSET(chan) ((chan) * 0x40)
+#define HI3660_TEMP(chan) (HI3660_OFFSET(chan) + 0x1C)
+#define HI3660_TH(chan) (HI3660_OFFSET(chan) + 0x20)
+#define HI3660_LAG(chan) (HI3660_OFFSET(chan) + 0x28)
+#define HI3660_INT_EN(chan) (HI3660_OFFSET(chan) + 0x2C)
+#define HI3660_INT_CLR(chan) (HI3660_OFFSET(chan) + 0x30)
+
#define HI6220_TEMP_BASE (-60000)
#define HI6220_TEMP_RESET (100000)
#define HI6220_TEMP_STEP (785)
#define HI6220_TEMP_LAG (3500)
+#define HI3660_TEMP_BASE (-63780)
+#define HI3660_TEMP_STEP (205)
+#define HI3660_TEMP_LAG (4000)
+
#define HI6220_DEFAULT_SENSOR 2
+#define HI3660_DEFAULT_SENSOR 1
#define MAX_THRES_NUM 2
@@ -96,6 +108,24 @@ static inline int hi6220_thermal_temp_to_step(int temp)
}
/*
+ * for Hi3660,
+ * Step: 189/922 (0.205)
+ * Temperature base: -63.780°C
+ *
+ * The register is programmed in temperature steps, every step is 205
+ * millidegree and begins at -63 780 m°C
+ */
+static inline int hi3660_thermal_step_to_temp(int step)
+{
+ return HI3660_TEMP_BASE + step * HI3660_TEMP_STEP;
+}
+
+static inline int hi3660_thermal_temp_to_step(int temp)
+{
+ return DIV_ROUND_UP(temp - HI3660_TEMP_BASE, HI3660_TEMP_STEP);
+}
+
+/*
* The lag register contains 5 bits encoding the temperature in steps.
*
* Each time the temperature crosses the threshold boundary, an
@@ -169,6 +199,45 @@ static inline int hi6220_thermal_get_temperature(void __iomem *addr)
}
/*
+ * [0:6] lag register
+ *
+ * The temperature is coded in steps, cf. HI3660_TEMP_STEP.
+ *
+ * Min : 0x00 : 0.0 °C
+ * Max : 0x7F : 26.0 °C
+ *
+ */
+static inline void hi3660_thermal_set_lag(void __iomem *addr,
+ int id, int value)
+{
+ writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F,
+ addr + HI3660_LAG(id));
+}
+
+static inline void hi3660_thermal_alarm_clear(void __iomem *addr,
+ int id, int value)
+{
+ writel(value, addr + HI3660_INT_CLR(id));
+}
+
+static inline void hi3660_thermal_alarm_enable(void __iomem *addr,
+ int id, int value)
+{
+ writel(value, addr + HI3660_INT_EN(id));
+}
+
+static inline void hi3660_thermal_alarm_set(void __iomem *addr,
+ int id, int value)
+{
+ writel(value, addr + HI3660_TH(id));
+}
+
+static inline int hi3660_thermal_get_temperature(void __iomem *addr, int id)
+{
+ return hi3660_thermal_step_to_temp(readl(addr + HI3660_TEMP(id)));
+}
+
+/*
* Temperature configuration register - Sensor selection
*
* Bits [19:12]
@@ -206,11 +275,22 @@ static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data)
return 0;
}
+static int hi3660_thermal_irq_handler(struct hisi_thermal_data *data)
+{
+ hi3660_thermal_alarm_clear(data->regs, data->sensor.id, 1);
+ return 0;
+}
+
static int hi6220_thermal_get_temp(struct hisi_thermal_data *data)
{
return hi6220_thermal_get_temperature(data->regs);
}
+static int hi3660_thermal_get_temp(struct hisi_thermal_data *data)
+{
+ return hi3660_thermal_get_temperature(data->regs, data->sensor.id);
+}
+
static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
{
/* disable sensor module */
@@ -222,6 +302,13 @@ static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
return 0;
}
+static int hi3660_thermal_disable_sensor(struct hisi_thermal_data *data)
+{
+ /* disable sensor module */
+ hi3660_thermal_alarm_enable(data->regs, data->sensor.id, 0);
+ return 0;
+}
+
static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
{
struct hisi_thermal_sensor *sensor = &data->sensor;
@@ -260,6 +347,29 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
return 0;
}
+static int hi3660_thermal_enable_sensor(struct hisi_thermal_data *data)
+{
+ unsigned int value;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
+
+ /* disable interrupt */
+ hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
+
+ /* setting lag value between current temp and the threshold */
+ hi3660_thermal_set_lag(data->regs, sensor->id, HI3660_TEMP_LAG);
+
+ /* set interrupt threshold */
+ value = hi3660_thermal_temp_to_step(sensor->thres_temp[0]);
+ value |= hi3660_thermal_temp_to_step(sensor->thres_temp[1]) << 10;
+ hi3660_thermal_alarm_set(data->regs, sensor->id, value);
+
+ /* enable interrupt */
+ hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
+ hi3660_thermal_alarm_enable(data->regs, sensor->id, 1);
+
+ return 0;
+}
+
static int hi6220_thermal_probe(struct hisi_thermal_data *data)
{
struct platform_device *pdev = data->pdev;
@@ -296,6 +406,33 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data)
return 0;
}
+static int hi3660_thermal_probe(struct hisi_thermal_data *data)
+{
+ struct platform_device *pdev = data->pdev;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+
+ data->get_temp = hi3660_thermal_get_temp;
+ data->enable_sensor = hi3660_thermal_enable_sensor;
+ data->disable_sensor = hi3660_thermal_disable_sensor;
+ data->irq_handler = hi3660_thermal_irq_handler;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->regs)) {
+ dev_err(dev, "failed to get io address\n");
+ return PTR_ERR(data->regs);
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0)
+ return data->irq;
+
+ data->sensor.id = HI3660_DEFAULT_SENSOR;
+
+ return 0;
+}
+
static int hisi_thermal_get_temp(void *__data, int *temp)
{
@@ -371,7 +508,14 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
}
static const struct of_device_id of_hisi_thermal_match[] = {
- { .compatible = "hisilicon,tsensor", .data = hi6220_thermal_probe },
+ {
+ .compatible = "hisilicon,tsensor",
+ .data = hi6220_thermal_probe
+ },
+ {
+ .compatible = "hisilicon,hi3660-tsensor",
+ .data = hi3660_thermal_probe
+ },
{ /* end */ }
};
MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
--
2.8.1
Powered by blists - more mailing lists