[<prev] [next>] [day] [month] [year] [list]
Message-ID: <98e511f9-8f66-42eb-962f-b33520d0be89@rwthex-w2-a.rwth-ad.de>
Date: Mon, 25 Sep 2017 02:02:37 +0200
From: Stefan Brüns <stefan.bruens@...h-aachen.de>
To: <linux-sunxi@...glegroups.com>
CC: <devicetree@...r.kernel.org>, Chen-Yu Tsai <wens@...e.org>,
Andre Przywara <andre.przywara@....com>,
<linux-kernel@...r.kernel.org>,
Dan Williams <dan.j.williams@...el.com>,
Vinod Koul <vinod.koul@...el.com>,
Rob Herring <robh+dt@...nel.org>, <dmaengine@...r.kernel.org>,
Code Kipper <codekipper@...il.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
<linux-arm-kernel@...ts.infradead.org>,
Stefan Brüns <stefan.bruens@...h-aachen.de>
Subject: [PATCH v3 03/10] dmaengine: sun6i: Restructure code to allow extension for new SoCs
The current code mixes three distinct operations when transforming
the slave config to register settings:
1. special handling of DMA_SLAVE_BUSWIDTH_UNDEFINED, maxburst == 0
2. range checking
3. conversion of raw to register values
As the range checks depend on the specific SoC, move these out of the
conversion to distinct operations.
Signed-off-by: Stefan Brüns <stefan.bruens@...h-aachen.de>
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
Changes in v3: None
Changes in v2:
- Store burst lengths in config instead of device structure
drivers/dma/sun6i-dma.c | 66 ++++++++++++++++++++++++++++---------------------
1 file changed, 38 insertions(+), 28 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 269d4ea194e8..5d0c009bad02 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -118,6 +118,8 @@ struct sun6i_dma_config {
*/
void (*clock_autogate_enable)();
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
+ u32 src_burst_lengths;
+ u32 dst_burst_lengths;
};
/*
@@ -266,10 +268,6 @@ static inline s8 convert_burst(u32 maxburst)
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
{
- if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
- (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
- return -EINVAL;
-
return addr_width >> 1;
}
@@ -538,41 +536,43 @@ static int set_config(struct sun6i_dma_dev *sdev,
enum dma_transfer_direction direction,
u32 *p_cfg)
{
+ enum dma_slave_buswidth src_addr_width, dst_addr_width;
+ u32 src_maxburst, dst_maxburst;
s8 src_width, dst_width, src_burst, dst_burst;
+ src_addr_width = sconfig->src_addr_width;
+ dst_addr_width = sconfig->dst_addr_width;
+ src_maxburst = sconfig->src_maxburst;
+ dst_maxburst = sconfig->dst_maxburst;
+
switch (direction) {
case DMA_MEM_TO_DEV:
- src_burst = convert_burst(sconfig->src_maxburst ?
- sconfig->src_maxburst : 8);
- src_width = convert_buswidth(sconfig->src_addr_width !=
- DMA_SLAVE_BUSWIDTH_UNDEFINED ?
- sconfig->src_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
- dst_burst = convert_burst(sconfig->dst_maxburst);
- dst_width = convert_buswidth(sconfig->dst_addr_width);
+ if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+ src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ src_maxburst = src_maxburst ? src_maxburst : 8;
break;
case DMA_DEV_TO_MEM:
- src_burst = convert_burst(sconfig->src_maxburst);
- src_width = convert_buswidth(sconfig->src_addr_width);
- dst_burst = convert_burst(sconfig->dst_maxburst ?
- sconfig->dst_maxburst : 8);
- dst_width = convert_buswidth(sconfig->dst_addr_width !=
- DMA_SLAVE_BUSWIDTH_UNDEFINED ?
- sconfig->dst_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
+ if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+ dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dst_maxburst = dst_maxburst ? dst_maxburst : 8;
break;
default:
return -EINVAL;
}
- if (src_burst < 0)
- return src_burst;
- if (src_width < 0)
- return src_width;
- if (dst_burst < 0)
- return dst_burst;
- if (dst_width < 0)
- return dst_width;
+ if (!(BIT(src_addr_width) & sdev->slave.src_addr_widths))
+ return -EINVAL;
+ if (!(BIT(dst_addr_width) & sdev->slave.dst_addr_widths))
+ return -EINVAL;
+ if (!(BIT(src_maxburst) & sdev->cfg->src_burst_lengths))
+ return -EINVAL;
+ if (!(BIT(dst_maxburst) & sdev->cfg->dst_burst_lengths))
+ return -EINVAL;
+
+ src_width = convert_buswidth(src_addr_width);
+ dst_width = convert_buswidth(dst_addr_width);
+ dst_burst = convert_burst(dst_maxburst);
+ src_burst = convert_burst(src_maxburst);
*p_cfg = DMA_CHAN_CFG_SRC_WIDTH(src_width) |
DMA_CHAN_CFG_DST_WIDTH(dst_width);
@@ -1038,6 +1038,8 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.nr_max_requests = 30,
.nr_max_vchans = 53,
.set_burst_length = sun6i_set_burst_length_a31;
+ .src_burst_lengths = BIT(1) | BIT(8);
+ .dst_burst_lengths = BIT(1) | BIT(8);
};
/*
@@ -1051,6 +1053,8 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.nr_max_vchans = 37,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23;
.set_burst_length = sun6i_set_burst_length_a31;
+ .src_burst_lengths = BIT(1) | BIT(8);
+ .dst_burst_lengths = BIT(1) | BIT(8);
};
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
@@ -1059,6 +1063,8 @@ static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.nr_max_vchans = 39,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23;
.set_burst_length = sun6i_set_burst_length_a31;
+ .src_burst_lengths = BIT(1) | BIT(8);
+ .dst_burst_lengths = BIT(1) | BIT(8);
};
/*
@@ -1072,6 +1078,8 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_vchans = 34,
.clock_autogate_enable = sun6i_enable_clock_autogate_h3;
.set_burst_length = sun6i_set_burst_length_h3;
+ .src_burst_lengths = BIT(1) | BIT(8);
+ .dst_burst_lengths = BIT(1) | BIT(8);
};
/*
@@ -1085,6 +1093,8 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.nr_max_vchans = 24,
.clock_autogate_enable = sun6i_enable_clock_autogate_a23;
.set_burst_length = sun6i_set_burst_length_a31;
+ .src_burst_lengths = BIT(1) | BIT(8);
+ .dst_burst_lengths = BIT(1) | BIT(8);
};
static const struct of_device_id sun6i_dma_match[] = {
--
2.14.1
Powered by blists - more mailing lists