| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ec539919-e0c2-4765-96ed-3aeb71af6e73@rwthex-w2-a.rwth-ad.de>
Date: Mon, 25 Sep 2017 02:02:38 +0200
From: Stefan Brüns <stefan.bruens@...h-aachen.de>
To: <linux-sunxi@...glegroups.com>
CC: <devicetree@...r.kernel.org>, Chen-Yu Tsai <wens@...e.org>,
Andre Przywara <andre.przywara@....com>,
<linux-kernel@...r.kernel.org>,
Dan Williams <dan.j.williams@...el.com>,
Vinod Koul <vinod.koul@...el.com>,
Rob Herring <robh+dt@...nel.org>, <dmaengine@...r.kernel.org>,
Code Kipper <codekipper@...il.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
<linux-arm-kernel@...ts.infradead.org>,
Stefan Brüns <stefan.bruens@...h-aachen.de>
Subject: [PATCH v3 04/10] dmaengine: sun6i: Enable additional burst lengths/widths on H3
The H3 supports bursts lengths of 1, 4, 8 and 16 transfers, each with
a width of 1, 2, 4 or 8 bytes.
The register value for the the width is log2-encoded, change the
conversion function to provide the correct value for width == 8.
Signed-off-by: Stefan Brüns <stefan.bruens@...h-aachen.de>
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
Changes in v3: None
Changes in v2:
- Store burst widths in config
drivers/dma/sun6i-dma.c | 54 ++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 45 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 5d0c009bad02..c7ad3b4e836c 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -120,6 +120,8 @@ struct sun6i_dma_config {
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
u32 src_burst_lengths;
u32 dst_burst_lengths;
+ u32 src_addr_widths;
+ u32 dst_addr_widths;
};
/*
@@ -259,8 +261,12 @@ static inline s8 convert_burst(u32 maxburst)
switch (maxburst) {
case 1:
return 0;
+ case 4:
+ return 1;
case 8:
return 2;
+ case 16:
+ return 3;
default:
return -EINVAL;
}
@@ -268,7 +274,7 @@ static inline s8 convert_burst(u32 maxburst)
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
{
- return addr_width >> 1;
+ return ilog2(addr_width);
}
static void sun6i_enable_clock_autogate_a23(struct sun6i_dma_dev *sdev)
@@ -1040,6 +1046,12 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31;
.src_burst_lengths = BIT(1) | BIT(8);
.dst_burst_lengths = BIT(1) | BIT(8);
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
};
/*
@@ -1055,6 +1067,12 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31;
.src_burst_lengths = BIT(1) | BIT(8);
.dst_burst_lengths = BIT(1) | BIT(8);
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
};
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
@@ -1065,11 +1083,19 @@ static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31;
.src_burst_lengths = BIT(1) | BIT(8);
.dst_burst_lengths = BIT(1) | BIT(8);
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
};
/*
* The H3 has 12 physical channels, a maximum DRQ port id of 27,
* and a total of 34 usable source and destination endpoints.
+ * It also supports additional burst lengths and bus widths,
+ * and the burst length fields have different offsets.
*/
static struct sun6i_dma_config sun8i_h3_dma_cfg = {
@@ -1078,8 +1104,16 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_vchans = 34,
.clock_autogate_enable = sun6i_enable_clock_autogate_h3;
.set_burst_length = sun6i_set_burst_length_h3;
- .src_burst_lengths = BIT(1) | BIT(8);
- .dst_burst_lengths = BIT(1) | BIT(8);
+ .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16);
+ .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16);
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
};
/*
@@ -1095,6 +1129,12 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31;
.src_burst_lengths = BIT(1) | BIT(8);
.dst_burst_lengths = BIT(1) | BIT(8);
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
};
static const struct of_device_id sun6i_dma_match[] = {
@@ -1174,12 +1214,8 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_pause = sun6i_dma_pause;
sdc->slave.device_resume = sun6i_dma_resume;
sdc->slave.device_terminate_all = sun6i_dma_terminate_all;
- sdc->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- sdc->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ sdc->slave.src_addr_widths = sdc->cfg->src_addr_widths;
+ sdc->slave.dst_addr_widths = sdc->cfg->dst_addr_widths;
sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
BIT(DMA_MEM_TO_DEV);
sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
--
2.14.1
Powered by blists - more mailing lists