| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1506344081.30138.32.camel@aj.id.au>
Date: Mon, 25 Sep 2017 22:24:41 +0930
From: Andrew Jeffery <andrew@...id.au>
To: Joel Stanley <joel@....id.au>, Lee Jones <lee.jones@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Jeremy Kerr <jk@...abs.org>,
Rick Altherr <raltherr@...gle.com>,
Ryan Chen <ryan_chen@...eedtech.com>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH v2 5/5] clk: aspeed: Add reset controller
On Thu, 2017-09-21 at 13:56 +0930, Joel Stanley wrote:
> There are some resets that are not associated with gates. These are
> represented by a reset controller.
>
> Signed-off-by: Joel Stanley <joel@....id.au>
> ---
> drivers/clk/clk-aspeed.c | 82 +++++++++++++++++++++++++++++++-
> include/dt-bindings/clock/aspeed-clock.h | 9 ++++
> 2 files changed, 90 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
> index dec9db4ec47b..db97c0f9f99e 100644
> --- a/drivers/clk/clk-aspeed.c
> +++ b/drivers/clk/clk-aspeed.c
> @@ -17,6 +17,7 @@
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
>
> @@ -256,6 +257,68 @@ static const struct clk_ops aspeed_clk_gate_ops = {
> .is_enabled = aspeed_clk_is_enabled,
> };
>
> +/**
> + * struct aspeed_reset - Aspeed reset controller
> + * @map: regmap to access the containing system controller
> + * @rcdev: reset controller device
> + */
> +struct aspeed_reset {
> + struct regmap *map;
> + struct reset_controller_dev rcdev;
> +};
> +
> +#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
> +
> +static const u8 aspeed_resets[] = {
> + 25, /* x-dma */
> + 24, /* mctp */
> + 23, /* adc */
> + 22, /* jtag-master */
> + 18, /* mic */
> + 9, /* pwm */
> + 8, /* pci-vga */
> + 2, /* i2c */
> + 1, /* ahb */
Bit of a nit, but given you define macros for the indices, maybe use designated
initialisers and drop the comments.
> +};
> +
> +static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct aspeed_reset *ar = to_aspeed_reset(rcdev);
> + u32 rst = BIT(aspeed_resets[id]);
> +
> + return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0);
> +}
> +
> +static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct aspeed_reset *ar = to_aspeed_reset(rcdev);
> + u32 rst = BIT(aspeed_resets[id]);
> +
> + return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst);
> +}
> +
> +static int aspeed_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct aspeed_reset *ar = to_aspeed_reset(rcdev);
> + u32 val, rst = BIT(aspeed_resets[id]);
> + int ret;
> +
> + ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val);
> + if (ret)
> + return ret;
> +
> + return !!(val & rst);
> +}
> +
> +static const struct reset_control_ops aspeed_reset_ops = {
> + .assert = aspeed_reset_assert,
> + .deassert = aspeed_reset_deassert,
> + .status = aspeed_reset_status,
> +};
> +
> static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
> const char *name, const char *parent_name, unsigned long flags,
> struct regmap *map, u8 clock_idx, u8 reset_idx,
> @@ -299,10 +362,11 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
> const struct clk_div_table *mac_div_table;
> const struct clk_div_table *div_table;
> struct device *dev = &pdev->dev;
> + struct aspeed_reset *ar;
> struct regmap *map;
> struct clk_hw *hw;
> u32 val, rate;
> - int i;
> + int i, ret;
>
> map = syscon_node_to_regmap(dev->of_node);
> if (IS_ERR(map)) {
> @@ -310,6 +374,22 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
> return PTR_ERR(map);
> }
>
> + ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
> + if (!ar)
> + return -ENOMEM;
> +
> + ar->map = map;
> + ar->rcdev.owner = THIS_MODULE;
> + ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
> + ar->rcdev.ops = &aspeed_reset_ops;
> + ar->rcdev.of_node = dev->of_node;
> +
> + ret = devm_reset_controller_register(dev, &ar->rcdev);
> + if (ret) {
> + dev_err(dev, "could not register reset controller\n");
> + return ret;
> + }
> +
> /* SoC generations share common layouts but have different divisors */
> soc_data = of_device_get_match_data(&pdev->dev);
> div_table = soc_data->div_table;
> diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
> index afe06b77562d..a9d552b6bbd2 100644
> --- a/include/dt-bindings/clock/aspeed-clock.h
> +++ b/include/dt-bindings/clock/aspeed-clock.h
> @@ -40,4 +40,13 @@
> #define ASPEED_CLK_GATE_SDCLKCLK (22 + ASPEED_CLK_GATES)
> #define ASPEED_CLK_GATE_LHCCLK (23 + ASPEED_CLK_GATES)
>
> +#define ASPEED_RESET_XDMA 0
> +#define ASPEED_RESET_MCTP 1
> +#define ASPEED_RESET_JTAG_MASTER 2
> +#define ASPEED_RESET_MIC 3
> +#define ASPEED_RESET_PWM 4
> +#define ASPEED_RESET_PCIVGA 5
> +#define ASPEED_RESET_I2C 6
> +#define ASPEED_RESET_AHB 7
> +
> #endif
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists