| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cdccf6a3-8c66-89e5-be4f-a03e64591dbe@tronnes.org>
Date: Mon, 25 Sep 2017 18:21:19 +0200
From: Noralf Trønnes <noralf@...nnes.org>
To: Harsha Sharma <harshasharmaiitr@...il.com>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
outreachy-kernel@...glegroups.com
Subject: Re: [PATCH] drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
Den 23.09.2017 11.10, skrev Harsha Sharma:
> Convert instances of dev_error to DRM_DEV_ERROR as we have
> DRM_DEV_ERROR variants of drm print macros.
>
> Signed-off-by: Harsha Sharma <harshasharmaiitr@...il.com>
> ---
> drivers/gpu/drm/tinydrm/mi0283qt.c | 8 ++++----
> drivers/gpu/drm/tinydrm/repaper.c | 26 +++++++++++++-------------
> drivers/gpu/drm/tinydrm/st7586.c | 6 +++---
> 3 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c
> index 7e5bb7d..7dded50 100644
> --- a/drivers/gpu/drm/tinydrm/mi0283qt.c
> +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c
> @@ -31,7 +31,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
>
> ret = regulator_enable(mipi->regulator);
> if (ret) {
> - dev_err(dev, "Failed to enable regulator %d\n", ret);
> + DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret);
> return ret;
> }
>
> @@ -42,7 +42,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
> mipi_dbi_hw_reset(mipi);
> ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET);
> if (ret) {
> - dev_err(dev, "Error sending command %d\n", ret);
> + DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
> regulator_disable(mipi->regulator);
> return ret;
> }
> @@ -175,13 +175,13 @@ static int mi0283qt_probe(struct spi_device *spi)
>
> mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(mipi->reset)) {
> - dev_err(dev, "Failed to get gpio 'reset'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
> return PTR_ERR(mipi->reset);
> }
>
> dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
> if (IS_ERR(dc)) {
> - dev_err(dev, "Failed to get gpio 'dc'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
> return PTR_ERR(dc);
> }
>
> diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c
> index 30dc97b..bd152bb 100644
> --- a/drivers/gpu/drm/tinydrm/repaper.c
> +++ b/drivers/gpu/drm/tinydrm/repaper.c
> @@ -473,7 +473,7 @@ static void repaper_get_temperature(struct repaper_epd *epd)
>
> ret = thermal_zone_get_temp(epd->thermal, &temperature);
> if (ret) {
> - dev_err(&epd->spi->dev, "Failed to get temperature (%d)\n",
> + DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n",
> ret);
Please fix these alignment issues, or maybe just put it all on one line:
CHECK: Alignment should match open parenthesis
#59: FILE: drivers/gpu/drm/tinydrm/repaper.c:477:
+ DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature
(%d)\n",
ret);
CHECK: Alignment should match open parenthesis
#152: FILE: drivers/gpu/drm/tinydrm/repaper.c:995:
+ DRM_DEV_ERROR(dev, "Failed to get thermal zone:
%s\n",
thermal_zone);
With that changed you can add to your next version:
Reviewed-by: Noralf Trønnes <noralf@...nnes.org>
> return;
> }
> @@ -629,7 +629,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
> mutex_unlock(&tdev->dirty_lock);
>
> if (ret)
> - dev_err(fb->dev->dev, "Failed to update display (%d)\n", ret);
> + DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret);
> kfree(buf);
>
> return ret;
> @@ -703,7 +703,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
> }
>
> if (!i) {
> - dev_err(dev, "timeout waiting for panel to become ready.\n");
> + DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");
> power_off(epd);
> return;
> }
> @@ -725,9 +725,9 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
> ret = repaper_read_val(spi, 0x0f);
> if (ret < 0 || !(ret & 0x80)) {
> if (ret < 0)
> - dev_err(dev, "failed to read chip (%d)\n", ret);
> + DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
> else
> - dev_err(dev, "panel is reported broken\n");
> + DRM_DEV_ERROR(dev, "panel is reported broken\n");
> power_off(epd);
> return;
> }
> @@ -767,7 +767,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
> /* check DC/DC */
> ret = repaper_read_val(spi, 0x0f);
> if (ret < 0) {
> - dev_err(dev, "failed to read chip (%d)\n", ret);
> + DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
> power_off(epd);
> return;
> }
> @@ -779,7 +779,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
> }
>
> if (!dc_ok) {
> - dev_err(dev, "dc/dc failed\n");
> + DRM_DEV_ERROR(dev, "dc/dc failed\n");
> power_off(epd);
> return;
> }
> @@ -959,7 +959,7 @@ static int repaper_probe(struct spi_device *spi)
> if (IS_ERR(epd->panel_on)) {
> ret = PTR_ERR(epd->panel_on);
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get gpio 'panel-on'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n");
> return ret;
> }
>
> @@ -967,7 +967,7 @@ static int repaper_probe(struct spi_device *spi)
> if (IS_ERR(epd->discharge)) {
> ret = PTR_ERR(epd->discharge);
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get gpio 'discharge'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n");
> return ret;
> }
>
> @@ -975,7 +975,7 @@ static int repaper_probe(struct spi_device *spi)
> if (IS_ERR(epd->reset)) {
> ret = PTR_ERR(epd->reset);
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get gpio 'reset'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
> return ret;
> }
>
> @@ -983,7 +983,7 @@ static int repaper_probe(struct spi_device *spi)
> if (IS_ERR(epd->busy)) {
> ret = PTR_ERR(epd->busy);
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get gpio 'busy'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n");
> return ret;
> }
>
> @@ -991,7 +991,7 @@ static int repaper_probe(struct spi_device *spi)
> &thermal_zone)) {
> epd->thermal = thermal_zone_get_zone_by_name(thermal_zone);
> if (IS_ERR(epd->thermal)) {
> - dev_err(dev, "Failed to get thermal zone: %s\n",
> + DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n",
> thermal_zone);
> return PTR_ERR(epd->thermal);
> }
> @@ -1033,7 +1033,7 @@ static int repaper_probe(struct spi_device *spi)
> if (IS_ERR(epd->border)) {
> ret = PTR_ERR(epd->border);
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get gpio 'border'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n");
> return ret;
> }
>
> diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c
> index b439956..14361a5 100644
> --- a/drivers/gpu/drm/tinydrm/st7586.c
> +++ b/drivers/gpu/drm/tinydrm/st7586.c
> @@ -187,7 +187,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
> mipi_dbi_hw_reset(mipi);
> ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
> if (ret) {
> - dev_err(dev, "Error sending command %d\n", ret);
> + DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
> return;
> }
>
> @@ -355,13 +355,13 @@ static int st7586_probe(struct spi_device *spi)
>
> mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(mipi->reset)) {
> - dev_err(dev, "Failed to get gpio 'reset'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
> return PTR_ERR(mipi->reset);
> }
>
> a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW);
> if (IS_ERR(a0)) {
> - dev_err(dev, "Failed to get gpio 'a0'\n");
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");
> return PTR_ERR(a0);
> }
>
Powered by blists - more mailing lists