| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1506502753-27408-12-git-send-email-mgautam@codeaurora.org>
Date: Wed, 27 Sep 2017 14:29:07 +0530
From: Manu Gautam <mgautam@...eaurora.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Felipe Balbi <balbi@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-usb@...r.kernel.org, Manu Gautam <mgautam@...eaurora.org>,
linux-kernel@...r.kernel.org (open list:GENERIC PHY FRAMEWORK)
Subject: [PATCH v2 11/17] phy: qcom-qmp: Add register offsets for QMP V3 PHY
Registers offsets for QMP V3 PHY are changed from
previous versions (1/2), update same in header file.
Signed-off-by: Manu Gautam <mgautam@...eaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.h | 149 ++++++++++++++++++++++++++++++++++++
1 file changed, 149 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d930ca7..f7d4c2a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -134,4 +134,153 @@
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
+/* Only for QMP V3 PHY - DP COM registers */
+#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
+#define QPHY_V3_DP_COM_SW_RESET 0x04
+#define QPHY_V3_DP_COM_POWER_DOWN_CTRL 0x08
+#define QPHY_V3_DP_COM_SWI_CTRL 0x0c
+#define QPHY_V3_DP_COM_TYPEC_CTRL 0x10
+#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL 0x14
+#define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c
+
+/* Only for QMP V3 PHY - QSERDES COM registers */
+#define QSERDES_V3_COM_BG_TIMER 0x00c
+#define QSERDES_V3_COM_SSC_EN_CENTER 0x010
+#define QSERDES_V3_COM_SSC_ADJ_PER1 0x014
+#define QSERDES_V3_COM_SSC_ADJ_PER2 0x018
+#define QSERDES_V3_COM_SSC_PER1 0x01c
+#define QSERDES_V3_COM_SSC_PER2 0x020
+#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
+#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
+#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
+#define QSERDES_V3_COM_CLK_ENABLE1 0x038
+#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
+#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
+#define QSERDES_V3_COM_PLL_IVCO 0x048
+#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098
+#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c
+#define QSERDES_V3_COM_LOCK_CMP3_MODE0 0x0a0
+#define QSERDES_V3_COM_LOCK_CMP1_MODE1 0x0a4
+#define QSERDES_V3_COM_LOCK_CMP2_MODE1 0x0a8
+#define QSERDES_V3_COM_LOCK_CMP3_MODE1 0x0ac
+#define QSERDES_V3_COM_CLK_EP_DIV 0x05c
+#define QSERDES_V3_COM_CP_CTRL_MODE0 0x060
+#define QSERDES_V3_COM_CP_CTRL_MODE1 0x064
+#define QSERDES_V3_COM_PLL_RCTRL_MODE0 0x068
+#define QSERDES_V3_COM_PLL_RCTRL_MODE1 0x06c
+#define QSERDES_V3_COM_PLL_CCTRL_MODE0 0x070
+#define QSERDES_V3_COM_PLL_CCTRL_MODE1 0x074
+#define QSERDES_V3_COM_SYSCLK_EN_SEL 0x080
+#define QSERDES_V3_COM_RESETSM_CNTRL 0x088
+#define QSERDES_V3_COM_RESETSM_CNTRL2 0x08c
+#define QSERDES_V3_COM_LOCK_CMP_EN 0x090
+#define QSERDES_V3_COM_LOCK_CMP_CFG 0x094
+#define QSERDES_V3_COM_DEC_START_MODE0 0x0b0
+#define QSERDES_V3_COM_DEC_START_MODE1 0x0b4
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0 0x0b8
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0 0x0bc
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0 0x0c0
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1 0x0e4
+#define QSERDES_V3_COM_VCO_TUNE_CTRL 0x0ec
+#define QSERDES_V3_COM_VCO_TUNE_MAP 0x0f0
+#define QSERDES_V3_COM_VCO_TUNE1_MODE0 0x0f4
+#define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8
+#define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc
+#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100
+#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c
+#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120
+#define QSERDES_V3_COM_CLK_SELECT 0x138
+#define QSERDES_V3_COM_HSCLK_SEL 0x13c
+#define QSERDES_V3_COM_CORECLK_DIV_MODE0 0x148
+#define QSERDES_V3_COM_CORECLK_DIV_MODE1 0x14c
+#define QSERDES_V3_COM_CORE_CLK_EN 0x154
+#define QSERDES_V3_COM_C_READY_STATUS 0x158
+#define QSERDES_V3_COM_CMN_CONFIG 0x15c
+#define QSERDES_V3_COM_SVS_MODE_CLK_SEL 0x164
+#define QSERDES_V3_COM_DEBUG_BUS0 0x168
+#define QSERDES_V3_COM_DEBUG_BUS1 0x16c
+#define QSERDES_V3_COM_DEBUG_BUS2 0x170
+#define QSERDES_V3_COM_DEBUG_BUS3 0x174
+#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
+
+/* Only for QMP V3 PHY - TX registers */
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048
+#define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058
+#define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060
+#define QSERDES_V3_TX_LANE_MODE_1 0x08c
+#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4
+
+/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
+#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
+#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
+#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
+#define QSERDES_V3_RX_RX_TERM_BW 0x07c
+#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8
+#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3 0x0d8
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4 0x0dc
+#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x0f8
+#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x0fc
+#define QSERDES_V3_RX_SIGDET_ENABLES 0x100
+#define QSERDES_V3_RX_SIGDET_CNTRL 0x104
+#define QSERDES_V3_RX_SIGDET_LVL 0x108
+#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c
+#define QSERDES_V3_RX_RX_BAND 0x110
+#define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c
+
+/* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V3_PCS_TXMGN_V0 0x00c
+#define QPHY_V3_PCS_TXMGN_V1 0x010
+#define QPHY_V3_PCS_TXMGN_V2 0x014
+#define QPHY_V3_PCS_TXMGN_V3 0x018
+#define QPHY_V3_PCS_TXMGN_V4 0x01c
+#define QPHY_V3_PCS_TXMGN_LS 0x020
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0 0x024
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0 0x028
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1 0x02c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1 0x030
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V2 0x034
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2 0x038
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V3 0x03c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3 0x040
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V4 0x044
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4 0x048
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_LS 0x04c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS 0x050
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE 0x054
+#define QPHY_V3_PCS_RX_IDLE_DTCT_CNTRL 0x058
+#define QPHY_V3_PCS_RATE_SLEW_CNTRL 0x05c
+#define QPHY_V3_PCS_POWER_STATE_CONFIG1 0x060
+#define QPHY_V3_PCS_POWER_STATE_CONFIG2 0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG4 0x06c
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L 0x070
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H 0x074
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L 0x078
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H 0x07c
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG1 0x080
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG2 0x084
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG3 0x088
+#define QPHY_V3_PCS_TSYNC_RSYNC_TIME 0x08c
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x0a0
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK 0x0a4
+#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK 0x0b0
+#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME 0x0b8
+#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME 0x0bc
+#define QPHY_V3_PCS_FLL_CNTRL1 0x0c4
+#define QPHY_V3_PCS_FLL_CNTRL2 0x0c8
+#define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc
+#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0
+#define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4
+#define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8
+
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists