linux-kernel - Re: [PATCH V2] thermal/drivers/hisi: Switch to interrupt mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170928065752.GA31697@leoy-linaro>
Date:   Thu, 28 Sep 2017 14:57:52 +0800
From:   Leo Yan <leo.yan@...aro.org>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:     rui.zhang@...el.com, edubezval@...il.com, jean.wangtao@...aro.org,
        Keerthy <j-keerthy@...com>,
        "open list:THERMAL" <linux-pm@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V2] thermal/drivers/hisi: Switch to interrupt mode

Hi Daniel,

On Thu, Sep 28, 2017 at 07:13:44AM +0200, Daniel Lezcano wrote:
> At this moment, we have both the interrupt setup and the polling enabled. The
> interrupt does nothing more than forcing an update while the temperature is
> polled every second.
> 
> We can do much better than that, threshold is set to 65C in the DT and the
> passive cooling device enters in the dance when 75C is reached. We need to
> sample the temperature at 65C in order to let the IPA gather enough values for
> the PID computation. If the SoC is running at a temperature below 65C, we will
> be constantly polling for nothing.
> 
> This patch disables the sensor when the temperature is below 65C and enables it
> when passing the threshold. It results the thermal sensor driver will have no
> activity most of the time.
> 
> Cc: Keerthy <j-keerthy@...com>
> Cc: Leo Yang <leo.yan@...aro.org>

s/Yang/Yan :) Have tested this patch on Hikey at my side:

Reviewed-by: Leo Yan <leo.yan@...aro.org>
Tested-by: Leo Yan <leo.yan@...aro.org>

> Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
> ---
>  drivers/thermal/hisi_thermal.c | 24 ++++++++++++++----------
>  1 file changed, 14 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index 39f4627..74ea70d 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -218,6 +218,15 @@ static int hisi_thermal_get_temp(void *__data, int *temp)
>  	return 0;
>  }
>  
> +static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
> +				       bool on)
> +{
> +	struct thermal_zone_device *tzd = sensor->tzd;
> +
> +	tzd->ops->set_mode(tzd,
> +		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
> +}
> +
>  static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
>  	.get_temp = hisi_thermal_get_temp,
>  };
> @@ -236,12 +245,16 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
>  		dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
>  			 temp, sensor->thres_temp);
>  
> +		hisi_thermal_toggle_sensor(&data->sensor, true);
> +
>  		thermal_zone_device_update(data->sensor.tzd,
>  					   THERMAL_EVENT_UNSPECIFIED);
>  
>  	} else if (temp < sensor->thres_temp) {
>  		dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n",
>  			 temp, sensor->thres_temp);
> +
> +		hisi_thermal_toggle_sensor(&data->sensor, false);
>  	}
>  
>  	return IRQ_HANDLED;
> @@ -286,15 +299,6 @@ static const struct of_device_id of_hisi_thermal_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
>  
> -static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
> -				       bool on)
> -{
> -	struct thermal_zone_device *tzd = sensor->tzd;
> -
> -	tzd->ops->set_mode(tzd,
> -		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
> -}
> -
>  static int hisi_thermal_setup(struct hisi_thermal_data *data)
>  {
>  	struct hisi_thermal_sensor *sensor;
> @@ -393,7 +397,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> -	hisi_thermal_toggle_sensor(&data->sensor, true);
> +	hisi_thermal_toggle_sensor(&data->sensor, false);
>  
>  	return 0;
>  }
> -- 
> 2.7.4
>